Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

157 lines
4.6 KiB

//--------------------------------------------------------------------------------
// Custom RF module
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
// Enable support by passing RF_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef RF_SUPPORT
#define RF_SUPPORT 0
#endif
#ifndef RF_PIN
#define RF_PIN 14
#endif
#define RF_CHANNEL 31
#define RF_DEVICE 1
//--------------------------------------------------------------------------------
// General
//--------------------------------------------------------------------------------
#ifndef TEMPERATURE_MIN_CHANGE
#define TEMPERATURE_MIN_CHANGE 0.0 // Minimum temperature change to report
#endif
#ifndef HUMIDITY_MIN_CHANGE
#define HUMIDITY_MIN_CHANGE 0 // Minimum humidity change to report
#endif
#define TEMPERATURE_DECIMALS 1 // Decimals for temperature values
//--------------------------------------------------------------------------------
// DHTXX temperature/humidity sensor
// Enable support by passing DHT_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef DHT_SUPPORT
#define DHT_SUPPORT 0
#endif
#ifndef DHT_PIN
#define DHT_PIN 12
#endif
#ifndef DHT_TYPE
#define DHT_TYPE DHT22
#endif
#ifndef DHT_PULLUP
#define DHT_PULLUP 0
#endif
#ifndef DHT_UPDATE_INTERVAL
#define DHT_UPDATE_INTERVAL 60000
#endif
#define DHT_TEMPERATURE_TOPIC "temperature"
#define DHT_HUMIDITY_TOPIC "humidity"
#define HUMIDITY_NORMAL 0
#define HUMIDITY_COMFORTABLE 1
#define HUMIDITY_DRY 2
#define HUMIDITY_WET 3
//--------------------------------------------------------------------------------
// Analog sensor
// Enable support by passing ANALOG_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef ANALOG_SUPPORT
#define ANALOG_SUPPORT 0
#endif
#ifndef ANALOG_PIN
#define ANALOG_PIN 0
#endif
#ifndef ANALOG_UPDATE_INTERVAL
#define ANALOG_UPDATE_INTERVAL 60000
#endif
#define ANALOG_TOPIC "analog"
#if ANALOG_SUPPORT
#undef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 0
#endif
//--------------------------------------------------------------------------------
// Counter sensor
// Enable support by passing COUNTER_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef COUNTER_SUPPORT
#define COUNTER_SUPPORT 0 // Do not build with counter support by default
#endif
#ifndef COUNTER_PIN
#define COUNTER_PIN 2 // GPIO to monitor
#endif
#ifndef COUNTER_PIN_MODE
#define COUNTER_PIN_MODE INPUT // INPUT, INPUT_PULLUP
#endif
#ifndef COUNTER_INTERRUPT_MODE
#define COUNTER_INTERRUPT_MODE RISING // RISING, FALLING, BOTH
#endif
#ifndef COUNTER_UPDATE_INTERVAL
#define COUNTER_UPDATE_INTERVAL 5000 // Update counter every this millis
#endif
#define COUNTER_REPORT_EVERY 12 // Report counter every this updates (1 minute)
#define COUNTER_DEBOUNCE 10 // Do not register events within less than 10 millis
#define COUNTER_TOPIC "counter" // Default topic for MQTT, API and InfluxDB
//--------------------------------------------------------------------------------
// DS18B20 temperature sensor
// Enable support by passing DS18B20_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef DS18B20_SUPPORT
#define DS18B20_SUPPORT 0
#endif
#ifndef DS18B20_PIN
#define DS18B20_PIN 13
#endif
#ifndef DS18B20_PULLUP
#define DS18B20_PULLUP 1
#endif
#ifndef DS18B20_UPDATE_INTERVAL
#define DS18B20_UPDATE_INTERVAL 60000
#endif
#ifndef DS18B20_TEMPERATURE_TOPIC
#define DS18B20_TEMPERATURE_TOPIC "temperature"
#endif
#define DS18B20_RESOLUTION 9
//--------------------------------------------------------------------------------
// Internal power montior
// Enable support by passing ADC_VCC_ENABLED=1 build flag
// Do not enable this if using the analog GPIO for any other thing
//--------------------------------------------------------------------------------
#ifndef ADC_VCC_ENABLED
#define ADC_VCC_ENABLED 1
#endif
#if ADC_VCC_ENABLED
ADC_MODE(ADC_VCC);
#endif