Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

421 lines
14 KiB

// -----------------------------------------------------------------------------
// Configuration HELP
// -----------------------------------------------------------------------------
//
// MANUFACTURER: Name of the manufacturer of the board ("string")
// DEVICE: Name of the device ("string")
// BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)
// BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)
// BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)
// - BUTTON_PUSHBUTTON: button event is fired when released
// - BUTTON_SWITCH: button event is fired when pressed or released
// - BUTTON_DEFAULT_HIGH: there is a pull up in place
// - BUTTON_SET_PULLUP: set pullup by software
// RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)
// RELAY#_PIN_INVERSE: Relay has inversed logic (closed or ON when pulled down)
// RELAY#_LED: LED number that will be bind to the n-th relay (1-based)
// LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)
// LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)
// WIFI_LED: LED number that will used for WIFI notifications (1-based, defaults to 1)
// -----------------------------------------------------------------------------
// Development boards
// -----------------------------------------------------------------------------
#if defined(NODEMCUV2)
#define MANUFACTURER "NODEMCU"
#define DEVICE "LOLIN"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_LNGCLICK BUTTON_MODE_PULSE
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 1
#elif defined(D1_RELAYSHIELD)
#define MANUFACTURER "WEMOS"
#define DEVICE "D1_MINI"
#define RELAY1_PIN 5
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 1
// -----------------------------------------------------------------------------
// Itead Studio boards
// -----------------------------------------------------------------------------
#elif defined(SONOFF)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(SONOFF_TH)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_TH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(SONOFF_SV)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_SV"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(SLAMPHER)
#define MANUFACTURER "ITEAD"
#define DEVICE "SLAMPHER"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(S20)
#define MANUFACTURER "ITEAD"
#define DEVICE "S20"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(SONOFF_TOUCH)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_TOUCH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(SONOFF_POW)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_POW"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 15
#define LED1_PIN_INVERSE 0
#define ENABLE_POW 1
#elif defined(SONOFF_DUAL)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_DUAL"
#define BUTTON3_RELAY 1
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#undef SERIAL_BAUDRATE
#define SERIAL_BAUDRATE 19230
#undef RELAY_PROVIDER
#define RELAY_PROVIDER RELAY_PROVIDER_DUAL
#elif defined(SONOFF_4CH)
#define MANUFACTURER "ITEAD"
#define DEVICE "SONOFF_4CH"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON2_PIN 9
#define BUTTON2_RELAY 2
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON3_PIN 10
#define BUTTON3_RELAY 3
#define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON4_PIN 14
#define BUTTON4_RELAY 4
#define BUTTON4_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 5
#define RELAY2_PIN_INVERSE 0
#define RELAY3_PIN 4
#define RELAY3_PIN_INVERSE 0
#define RELAY4_PIN 15
#define RELAY4_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(ITEAD_1CH_INCHING)
// The inching functionality is managed by a misterious IC in the board.
// You cannot control the inching button and functionality from the ESP8266
// Besides, enabling the inching functionality using the hardware button
// will result in the relay switching on and off continuously.
// Fortunately the unkown IC keeps memory of the hardware inching status
// so you can just disable it and forget. The inching LED must be lit.
// You can still use the pulse options from the web interface
// without problem.
#define MANUFACTURER "ITEAD"
#define DEVICE "1CH_INCHING"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
#elif defined(ITEAD_MOTOR)
#define MANUFACTURER "ITEAD"
#define DEVICE "MOTOR"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 13
#define LED1_PIN_INVERSE 1
// -----------------------------------------------------------------------------
// Electrodragon boards
// -----------------------------------------------------------------------------
#elif defined(ESP_RELAY_BOARD)
#define MANUFACTURER "ELECTRODRAGON"
#define DEVICE "ESP_RELAY_BOARD"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON2_PIN 2
#define BUTTON2_RELAY 2
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 13
#define RELAY2_PIN_INVERSE 0
#define LED1_PIN 16
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// WorkChoice ecoPlug
// -----------------------------------------------------------------------------
#elif defined(ECOPLUG)
#define MANUFACTURER "WORKCHOICE"
#define DEVICE "ECOPLUG"
#define BUTTON1_PIN 13
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 15
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 2
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// AI Thinker
// -----------------------------------------------------------------------------
#elif defined(AI_LIGHT)
#define MANUFACTURER "AI THINKER"
#define DEVICE "AI LIGHT"
#undef RELAY_PROVIDER
#define RELAY_PROVIDER RELAY_PROVIDER_MY9291
// -----------------------------------------------------------------------------
// Jan Goedeke Wifi Relay
// https://github.com/JanGoe/esp8266-wifi-relay
// -----------------------------------------------------------------------------
#elif defined(WIFI_RELAY_NC)
#define MANUFACTURER "JAN_GOEDEKE"
#define DEVICE "WIFI_RELAY_NC"
#define BUTTON1_PIN 12
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON2_PIN 13
#define BUTTON2_RELAY 2
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 2
#define RELAY1_PIN_INVERSE 1
#define RELAY2_PIN 14
#define RELAY2_PIN_INVERSE 1
#elif defined(WIFI_RELAY_NO)
#define MANUFACTURER "JAN_GOEDEKE"
#define DEVICE "WIFI_RELAY_NO"
#define BUTTON1_PIN 12
#define BUTTON1_RELAY 1
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define BUTTON2_PIN 13
#define BUTTON2_RELAY 2
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
#define RELAY1_PIN 2
#define RELAY1_PIN_INVERSE 0
#define RELAY2_PIN 14
#define RELAY2_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// Jorge García Wifi+Relays Board Kit
// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit
// https://github.com/jorgegarciadev/wifikit
// -----------------------------------------------------------------------------
#elif defined(WIFI_RELAYS_BOARD_KIT)
#define MANUFACTURER "JORGE_GARCIA"
#define DEVICE "WIFI_RELAYS_BOARD_KIT"
#define RELAY1_PIN 0
#define RELAY1_PIN_INVERSE 1
#define RELAY2_PIN 2
#define RELAY2_PIN_INVERSE 1
// -----------------------------------------------------------------------------
// WiFi MQTT Relay / Thermostat
// -----------------------------------------------------------------------------
#elif defined(MQTT_RELAY)
#define MANUFACTURER "OPENENERGYMONITOR"
#define DEVICE "MQTT_RELAY"
#define BUTTON1_PIN 0
#define BUTTON1_RELAY 1
#define RELAY1_PIN 12
#define RELAY1_PIN_INVERSE 0
#define LED1_PIN 16
#define LED1_PIN_INVERSE 0
// -----------------------------------------------------------------------------
// Unknown hardware
// -----------------------------------------------------------------------------
#else
#error "UNSUPPORTED HARDWARE!"
#endif
// -----------------------------------------------------------------------------
// Default values
// -----------------------------------------------------------------------------
#ifndef BUTTON1_PRESS
#define BUTTON1_PRESS BUTTON_MODE_NONE
#endif
#ifndef BUTTON2_PRESS
#define BUTTON2_PRESS BUTTON_MODE_NONE
#endif
#ifndef BUTTON3_PRESS
#define BUTTON3_PRESS BUTTON_MODE_NONE
#endif
#ifndef BUTTON4_PRESS
#define BUTTON4_PRESS BUTTON_MODE_NONE
#endif
#ifndef BUTTON1_CLICK
#define BUTTON1_CLICK BUTTON_MODE_TOGGLE
#endif
#ifndef BUTTON2_CLICK
#define BUTTON2_CLICK BUTTON_MODE_TOGGLE
#endif
#ifndef BUTTON3_CLICK
#define BUTTON3_CLICK BUTTON_MODE_TOGGLE
#endif
#ifndef BUTTON4_CLICK
#define BUTTON4_CLICK BUTTON_MODE_TOGGLE
#endif
#ifndef BUTTON1_DBLCLICK
#define BUTTON1_DBLCLICK BUTTON_MODE_AP
#endif
#ifndef BUTTON2_DBLCLICK
#define BUTTON2_DBLCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON3_DBLCLICK
#define BUTTON3_DBLCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON4_DBLCLICK
#define BUTTON4_DBLCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON1_LNGCLICK
#define BUTTON1_LNGCLICK BUTTON_MODE_RESET
#endif
#ifndef BUTTON2_LNGCLICK
#define BUTTON2_LNGCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON3_LNGCLICK
#define BUTTON3_LNGCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON4_LNGCLICK
#define BUTTON4_LNGCLICK BUTTON_MODE_NONE
#endif
#ifndef BUTTON1_RELAY
#define BUTTON1_RELAY 0
#endif
#ifndef BUTTON2_RELAY
#define BUTTON2_RELAY 0
#endif
#ifndef BUTTON3_RELAY
#define BUTTON3_RELAY 0
#endif
#ifndef BUTTON4_RELAY
#define BUTTON4_RELAY 0
#endif
#ifndef RELAY1_LED
#define RELAY1_LED 0
#endif
#ifndef RELAY2_LED
#define RELAY2_LED 0
#endif
#ifndef RELAY3_LED
#define RELAY3_LED 0
#endif
#ifndef RELAY4_LED
#define RELAY4_LED 0
#endif
#ifndef WIFI_LED
#define WIFI_LED 1
#endif
// Needed for ESP8285 boards under Windows using PlatformIO (?)
#ifndef BUTTON_PUSHBUTTON
#define BUTTON_PUSHBUTTON 0
#define BUTTON_SWITCH 1
#define BUTTON_DEFAULT_HIGH 2
#define BUTTON_SET_PULLUP 4
#endif