mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2243 Commits
18 Branches
212 MiB
 
 
 
 
 
 
Tree: ecc3af0914
Branches Tags
${ item.name }
Create branch ${ searchTerm }
from 'ecc3af0914'
${ noResults }
mhsw-espurna/code/espurna/device.ino

2197 lines
79 KiB
Raw Blame History

/*
DEVICED MODULE
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
*/
// Configuration settings for each device, the most common ones are:
//
// board: ID of the board according to *devices* enum in hardware.h
// device: Name of the device ("string")
// btnGPIO <n>: GPIO for the n-th button (0-based)
// btnRelay <n>: Relay index linked to the n-th button
// btnMode <n>: Mode for the n-th button, can be a sum of:
// - BUTTON_PUSHBUTTON: button event is fired when released
// - BUTTON_SWITCH: button event is fired when pressed or released
// - BUTTON_DEFAULT_HIGH: there is a pull up in place
// - BUTTON_SET_PULLUP: set pullup by software
// rlyGPIO <n>: GPIO for the n-th relay (0-based)
// rlyType <n>: Type of the n-th relaym can be on of:
// - RELAY_TYPE_NORMAL
// - RELAY_TYPE_INVERSE
// - RELAY_TYPE_LATCHED
// - RELAY_TYPE_LATCHED_INVERSE
// ledGPIO <n>: GPIO for the n-th LED (0-based)
// ledLogic <n>: GPIO_LOGIC_DIRECT or GPIO_LOGIC_INVERSE
// ledMode <n>: Mode for the n-th LED, check types.h for LED_MODE_%
// ledRelay <n>: Relay linked to the n-th LED
//
// Besides, other hardware specific information can be added to any device
void _deviceLoad() {
// Do not load defaults if custom board
if (getSetting("board", DEVICE_UNKNOWN).toInt() == DEVICE_CUSTOM) return;
// -------------------------------------------------------------------------
// Board definitions
// -------------------------------------------------------------------------
#if defined(NODEMCU_LOLIN)
setSetting("board", DEVICE_NODEMCU_LOLIN);
setSetting("device", "NODEMCU_LOLIN");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(WEMOS_D1_MINI_RELAYSHIELD)
setSetting("board", DEVICE_WEMOS_D1_MINI_RELAYSHIELD);
setSetting("device", "WEMOS_D1_MINI_RELAYSHIELD");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_BASIC)
setSetting("board", DEVICE_ITEAD_SONOFF_BASIC);
setSetting("device", "ITEAD_SONOFF_BASIC");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_TH)
setSetting("board", DEVICE_ITEAD_SONOFF_TH);
setSetting("device", "ITEAD_SONOFF_TH");
setSetting("fw", ESPURNA_SENSOR);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
// Jack is connected to GPIO14 (and with a small hack to GPIO4)
setSetting("dhtEnabled", 1);
setSetting("dhtGPIO", 0, 14);
setSetting("dsEnabled", 1);
setSetting("dsGPIO", 0, 14);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_SV)
setSetting("board", DEVICE_ITEAD_SONOFF_SV);
setSetting("device", "ITEAD_SONOFF_SV");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_TOUCH)
setSetting("board", DEVICE_ITEAD_SONOFF_TOUCH);
setSetting("device", "ITEAD_SONOFF_TOUCH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_POW)
setSetting("board", DEVICE_ITEAD_SONOFF_POW);
setSetting("device", "ITEAD_SONOFF_POW");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 15);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 5);
setSetting("hlwCF1GPIO", 13);
setSetting("hlwCFGPIO", 14);
#elif defined(ITEAD_SONOFF_DUAL)
setSetting("board", DEVICE_ITEAD_SONOFF_DUAL);
setSetting("device", "ITEAD_SONOFF_DUAL");
setSetting("fw", ESPURNA_SONOFF_DUAL);
setSetting("btnRelay", 0, GPIO_NONE);
setSetting("btnRelay", 1, GPIO_NONE);
setSetting("btnRelay", 2, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_DUAL);
setSetting("rlyDummy", 2);
setSetting("dbgSerial", 0);
setSetting("dbgSpeed", 19230);
#elif defined(ITEAD_1CH_INCHING)
// The inching functionality is managed by a misterious IC in the board.
// You cannot control the inching button and functionality from the ESP8266
// Besides, enabling the inching functionality using the hardware button
// will result in the relay switching on and off continuously.
// Fortunately the unkown IC keeps memory of the hardware inching status
// so you can just disable it and forget. The inching LED must be lit.
// You can still use the pulse options from the web interface
// without problem.
setSetting("board", DEVICE_ITEAD_1CH_INCHING);
setSetting("device", "ITEAD_1CH_INCHING");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_4CH)
setSetting("board", DEVICE_ITEAD_SONOFF_4CH);
setSetting("device", "ITEAD_SONOFF_4CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnGPIO", 3, 14);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 2);
setSetting("btnRelay", 3, 3);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyGPIO", 3, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SLAMPHER)
setSetting("board", DEVICE_ITEAD_SLAMPHER);
setSetting("device", "ITEAD_SLAMPHER");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_S20)
setSetting("board", DEVICE_ITEAD_S20);
setSetting("device", "ITEAD_S20");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ELECTRODRAGON_WIFI_IOT)
setSetting("board", DEVICE_ELECTRODRAGON_WIFI_IOT);
setSetting("device", "ELECTRODRAGON_WIFI_IOT");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 2);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("ledGPIO", 0, 16);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 13);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(WORKCHOICE_ECOPLUG)
setSetting("board", DEVICE_WORKCHOICE_ECOPLUG);
setSetting("device", "WORKCHOICE_ECOPLUG");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(JANGOE_WIFI_RELAY_NC)
// Jan Goedeke Wifi Relay
// https://github.com/JanGoe/esp8266-wifi-relay
setSetting("board", DEVICE_JANGOE_WIFI_RELAY_NC);
setSetting("device", "JANGOE_WIFI_RELAY_NC");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 12);
setSetting("btnGPIO", 1, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("rlyGPIO", 0, 2);
setSetting("rlyGPIO", 1, 14);
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
#elif defined(JANGOE_WIFI_RELAY_NO)
setSetting("board", DEVICE_JANGOE_WIFI_RELAY_NO);
setSetting("device", "JANGOE_WIFI_RELAY_NO");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 12);
setSetting("btnGPIO", 1, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("rlyGPIO", 0, 2);
setSetting("rlyGPIO", 1, 14);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(OPENENERGYMONITOR_MQTT_RELAY)
setSetting("board", DEVICE_OPENENERGYMONITOR_MQTT_RELAY);
setSetting("device", "OPENENERGYMONITOR_MQTT_RELAY");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 16);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(JORGEGARCIA_WIFI_RELAYS)
// Jorge García Wifi+Relays Board Kit
// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit
// https://github.com/jorgegarciadev/wifikit
setSetting("board", DEVICE_JORGEGARCIA_WIFI_RELAYS);
setSetting("device", "JORGEGARCIA_WIFI_RELAYS");
setSetting("fw", ESPURNA_BASIC);
setSetting("rlyGPIO", 0, 0);
setSetting("rlyGPIO", 1, 2);
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
#elif defined(AITHINKER_AI_LIGHT)
setSetting("board", DEVICE_AITHINKER_AI_LIGHT);
setSetting("device", "AITHINKER_AI_LIGHT");
setSetting("fw", ESPURNA_MY92XX);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("myModel", 0); // 4 channels per chip
setSetting("myChips", 1);
setSetting("myDIGPIO", 13);
setSetting("myDCKIGPIO", 15);
setSetting("myMapping", "0123");
#elif defined(MAGICHOME_LED_CONTROLLER)
setSetting("board", DEVICE_MAGICHOME_LED_CONTROLLER);
setSetting("device", "MAGICHOME_LED_CONTROLLER");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("irEnabled", 1);
setSetting("irGPIO", 4);
setSetting("irSet", 1);
setSetting("litChGPIO", 0, 14);
setSetting("litChGPIO", 1, 5);
setSetting("litChGPIO", 2, 12);
setSetting("litChGPIO", 3, 13);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
#elif defined(ITEAD_MOTOR)
setSetting("board", DEVICE_ITEAD_MOTOR);
setSetting("device", "ITEAD_MOTOR");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(TINKERMAN_ESPURNA_H06)
setSetting("board", DEVICE_TINKERMAN_ESPURNA_H06);
setSetting("device", "TINKERMAN_ESPURNA_H06");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 4);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 5);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 2);
setSetting("hlwCF1GPIO", 13);
setSetting("hlwCFGPIO", 14);
#elif defined(HUACANXING_H801)
setSetting("board", DEVICE_HUACANXING_H801);
setSetting("device", "HUACANXING_H801");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 5);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("dbgPort", 1);
setSetting("litChGPIO", 0, 15);
setSetting("litChGPIO", 1, 13);
setSetting("litChGPIO", 2, 12);
setSetting("litChGPIO", 3, 14);
setSetting("litChGPIO", 4, 4);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
#elif defined(ITEAD_BNSZ01)
setSetting("board", DEVICE_ITEAD_BNSZ01);
setSetting("device", "ITEAD_BNSZ01");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 12);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
#elif defined(ITEAD_SONOFF_RFBRIDGE)
setSetting("board", DEVICE_ITEAD_SONOFF_RFBRIDGE);
setSetting("device", "ITEAD_SONOFF_RFBRIDGE");
setSetting("fw", ESPURNA_SONOFF_RFBRIDGE);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_RFBRIDGE);
setSetting("rlyDummy", 8);
// When using un-modified harware, ESPurna communicates with the secondary
// MCU EFM8BB1 via UART at 19200 bps so we need to change the speed of
// the port and remove UART noise on serial line
setSetting("dbgSerial", 0);
setSetting("dbgSpeed", 19200);
setSetting("rfbDirect", 0);
setSetting("rfbRXGPIO", 4);
setSetting("rfbTXGPIO", 5);
#elif defined(ITEAD_SONOFF_4CH_PRO)
setSetting("board", DEVICE_ITEAD_SONOFF_4CH_PRO);
setSetting("device", "ITEAD_SONOFF_4CH_PRO");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnGPIO", 3, 14);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 2);
setSetting("btnRelay", 3, 3);
// Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle
// buttons and relays, but it also forwards button presses to the ESP8285.
// This allows ESPurna to handle button presses -almost- the same way
// as with other devices except:
// * Double click seems to break/disable the button on the STM32 side
// * With S6 switch to 1 (self-locking and inching modes) everything's OK
// * With S6 switch to 0 (interlock mode) if there is a relay ON
// and you click on another relay button, the STM32 sends a "press"
// event for the button of the first relay (to turn it OFF) but it
// does not send a "release" event. It's like it's holding the
// button down since you can see it is still LOW.
// Whatever reason the result is that it may actually perform a
// long click or long-long click.
// The configuration below make the button toggle the relay on press events
// and disables any possibly harmful combination with S6 set to 0.
// If you are sure you will only use S6 to 1 you can comment the
// btnLngClick(0) and btnLngLngClick(0) options below to recover the
// reset mode and factory reset functionalities, or link other actions like
// AP mode in the commented line below.
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_AP
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_FACTORY
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 1, BUTTON_MODE_NONE);
setSetting("btnPress", 2, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 2, BUTTON_MODE_NONE);
setSetting("btnPress", 3, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 3, BUTTON_MODE_NONE);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyGPIO", 3, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_B1)
setSetting("board", DEVICE_ITEAD_SONOFF_B1);
setSetting("device", "ITEAD_SONOFF_B1");
setSetting("fw", ESPURNA_MY92XX);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChFactor", 4, 0.1); // White LEDs are way more bright in the B1
setSetting("litChFactor", 5, 0.1); // White LEDs are way more bright in the B1
setSetting("myModel", 1); // 3 channels per chip
setSetting("myChips", 2);
setSetting("myDIGPIO", 12);
setSetting("myDCKIGPIO", 14);
setSetting("myMapping", "43501"); // TODO
#elif defined(ITEAD_SONOFF_LED)
setSetting("board", DEVICE_ITEAD_SONOFF_LED);
setSetting("device", "ITEAD_SONOFF_LED");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 12); // Cold white
setSetting("litChGPIO", 1, 14); // Warm white
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
#elif defined(ITEAD_SONOFF_T1_1CH)
setSetting("board", DEVICE_ITEAD_SONOFF_T1_1CH);
setSetting("device", "ITEAD_SONOFF_T1_1CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_T1_2CH)
setSetting("board", DEVICE_ITEAD_SONOFF_T1_2CH);
setSetting("device", "ITEAD_SONOFF_T1_2CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnClick", 1, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_T1_3CH)
setSetting("board", DEVICE_ITEAD_SONOFF_T1_3CH);
setSetting("device", "ITEAD_SONOFF_T1_3CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 2);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
setSetting("btnPress", 2, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnClick", 1, BUTTON_MODE_NONE);
setSetting("btnClick", 2, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
setSetting("btnDblClick", 2, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngClick", 2, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
setSetting("btnLngLngClick", 2, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_RF)
setSetting("board", DEVICE_ITEAD_SONOFF_RF);
setSetting("device", "ITEAD_SONOFF_RF");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(WION_50055)
// WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap
// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551
// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777
// Does not support power monitoring yet
setSetting("board", DEVICE_WION_50055);
setSetting("device", "WION_50055");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(EXS_WIFI_RELAY_V31)
// EX-Store Wifi Relay v3.1
// https://ex-store.de/ESP8266-WiFi-Relay-V31
setSetting("board", DEVICE_EXS_WIFI_RELAY_V31);
setSetting("device", "EXS_WIFI_RELAY_V31");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("rlyGPIO", 0, 13);
setSetting("rlyResetGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_LATCHED);
#elif defined(HUACANXING_H802)
setSetting("board", DEVICE_HUACANXING_H802);
setSetting("device", "HUACANXING_H802");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("dbgPort", 1);
setSetting("litChGPIO", 0, 12);
setSetting("litChGPIO", 1, 14);
setSetting("litChGPIO", 2, 13);
setSetting("litChGPIO", 3, 15);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
#elif defined(GENERIC_V9261F)
setSetting("board", DEVICE_GENERIC_V9261F);
setSetting("device", "GENERIC_V9261F");
setSetting("fw", ESPURNA_V9261F);
setSetting("v92Enabled", 1);
setSetting("v92GPIO", 2);
setSetting("v92Logic", GPIO_LOGIC_INVERSE);
#elif defined(GENERIC_ECH1560)
setSetting("board", DEVICE_GENERIC_ECH1560);
setSetting("device", "GENERIC_ECH1560");
setSetting("fw", ESPURNA_ECH1560);
setSetting("echEnabled", 1);
setSetting("echCLKGPIO", 4);
setSetting("echMISOGPIO", 5);
setSetting("echLogic", GPIO_LOGIC_INVERSE);
#elif defined(TINKERMAN_ESPURNA_H08)
setSetting("board", DEVICE_TINKERMAN_ESPURNA_H08);
setSetting("device", "TINKERMAN_ESPURNA_H08");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 4);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 5);
setSetting("hlwCF1GPIO", 13);
setSetting("hlwCFGPIO", 14);
#elif defined(MANCAVEMADE_ESPLIVE)
// ESPLive
// https://github.com/ManCaveMade/ESP-Live
setSetting("board", DEVICE_MANCAVEMADE_ESPLIVE);
setSetting("device", "MANCAVEMADE_ESPLIVE");
setSetting("fw", ESPURNA_SENSOR);
setSetting("btnGPIO", 0, 4);
setSetting("btnGPIO", 1, 5);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
// The ESPLive has an ADC MUX which needs to be enabled
setSetting("ledGPIO", 0, 16);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledMode", LED_MODE_ON);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 13);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("dsEnabled", 1);
setSetting("dsGPIO", 0, 2);
setSetting("snsDelta", MAGNITUDE_TEMPERATURE, 1.0); // Temperature min change to report
#elif defined(INTERMITTECH_QUINLED)
// QuinLED
// http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html
setSetting("board", DEVICE_INTERMITTECH_QUINLED);
setSetting("device", "INTERMITTECH_QUINLED");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 5);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 0);
setSetting("litChGPIO", 1, 2);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
#elif defined(MAGICHOME_LED_CONTROLLER_20)
setSetting("board", DEVICE_MAGICHOME_LED_CONTROLLER_20);
setSetting("device", "MAGICHOME_LED_CONTROLLER_20");
setSetting("fw", ESPURNA_DIMMER);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("irEnabled", 1);
setSetting("irGPIO", 4);
setSetting("irSet", 1);
setSetting("litChGPIO", 0, 5);
setSetting("litChGPIO", 1, 12);
setSetting("litChGPIO", 2, 13);
setSetting("litChGPIO", 3, 15);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
#elif defined(ARILUX_AL_LC06)
setSetting("board", DEVICE_ARILUX_AL_LC06);
setSetting("device", "ARILUX_AL_LC06");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 14);
setSetting("litChGPIO", 1, 12);
setSetting("litChGPIO", 2, 13);
setSetting("litChGPIO", 3, 15);
setSetting("litChGPIO", 4, 5);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
#elif defined(XENON_SM_PW702U)
setSetting("board", DEVICE_XENON_SM_PW702U);
setSetting("device", "XENON_SM_PW702U");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(AUTHOMETION_LYT8266)
// AUTHOMETION LYT8266
// https://authometion.com/shop/en/home/13-lyt8266.html
setSetting("board", DEVICE_AUTHOMETION_LYT8266);
setSetting("device", "AUTHOMETION_LYT8266");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 13);
setSetting("litChGPIO", 1, 12);
setSetting("litChGPIO", 2, 14);
setSetting("litChGPIO", 3, 2);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
setSetting("litEnableGPIO", 15);
setSetting("litEnableLogic", GPIO_LOGIC_DIRECT);
#elif defined(ARILUX_E27)
setSetting("board", DEVICE_ARILUX_E27);
setSetting("device", "ARILUX_E27");
setSetting("fw", ESPURNA_MY92XX);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("myModel", 0); // 4 channels per chip
setSetting("myChips", 1);
setSetting("myDIGPIO", 13);
setSetting("myDCKIGPIO", 15);
setSetting("myMapping", "0123");
#elif defined(YJZK_SWITCH_1CH)
setSetting("board", DEVICE_YJZK_SWITCH_1CH);
setSetting("device", "YJZK_SWITCH_1CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(YJZK_SWITCH_2CH)
setSetting("board", DEVICE_YJZK_SWITCH_2CH);
setSetting("device", "YJZK_SWITCH_2CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 1, BUTTON_MODE_NONE);
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(YJZK_SWITCH_3CH)
setSetting("board", DEVICE_YJZK_SWITCH_3CH);
setSetting("device", "YJZK_SWITCH_3CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 2);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 1, BUTTON_MODE_NONE);
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
setSetting("btnPress", 2, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 2, BUTTON_MODE_NONE);
setSetting("btnDblClick", 2, BUTTON_MODE_NONE);
setSetting("btnLngClick", 2, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 2, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_DUAL_R2)
setSetting("board", DEVICE_ITEAD_SONOFF_DUAL_R2);
setSetting("device", "ITEAD_SONOFF_DUAL_R2");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(GENERIC_8CH)
setSetting("board", DEVICE_GENERIC_8CH);
setSetting("device", "GENERIC_8CH");
setSetting("fw", ESPURNA_BASIC);
setSetting("rlyGPIO", 0, 0);
setSetting("rlyGPIO", 1, 2);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyGPIO", 3, 5);
setSetting("rlyGPIO", 4, 12);
setSetting("rlyGPIO", 5, 13);
setSetting("rlyGPIO", 6, 14);
setSetting("rlyGPIO", 7, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
setSetting("rlyType", 4, RELAY_TYPE_NORMAL);
setSetting("rlyType", 5, RELAY_TYPE_NORMAL);
setSetting("rlyType", 6, RELAY_TYPE_NORMAL);
setSetting("rlyType", 7, RELAY_TYPE_NORMAL);
#elif defined(ARILUX_AL_LC01)
setSetting("board", DEVICE_ARILUX_AL_LC01);
setSetting("device", "ARILUX_AL_LC01");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 5);
setSetting("litChGPIO", 1, 12);
setSetting("litChGPIO", 2, 13);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
#elif defined(ARILUX_AL_LC11)
setSetting("board", DEVICE_ARILUX_AL_LC11);
setSetting("device", "ARILUX_AL_LC11");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 5);
setSetting("litChGPIO", 1, 4);
setSetting("litChGPIO", 2, 14);
setSetting("litChGPIO", 3, 13);
setSetting("litChGPIO", 4, 12);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
#elif defined(ARILUX_AL_LC02)
setSetting("board", DEVICE_ARILUX_AL_LC02);
setSetting("device", "ARILUX_AL_LC02");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 12);
setSetting("litChGPIO", 1, 5);
setSetting("litChGPIO", 2, 13);
setSetting("litChGPIO", 3, 15);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
#elif defined(KMC_70011)
// KMC 70011
// https://www.amazon.com/KMC-Monitoring-Required-Control-Compatible/dp/B07313TH7B
setSetting("board", DEVICE_KMC_70011);
setSetting("device", "KMC_70011");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 14);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 12);
setSetting("hlwCF1GPIO", 5);
setSetting("hlwCFGPIO", 4);
setSetting("hlwVolResUp", 2000000);
#elif defined(GIZWITS_WITTY_CLOUD)
setSetting("board", DEVICE_GIZWITS_WITTY_CLOUD);
setSetting("device", "GIZWITS_WITTY_CLOUD");
setSetting("fw", ESPURNA_DIMMER);
setSetting("btnGPIO", 0, 4);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("anaEnabled", 1);
setSetting("litChGPIO", 0, 15);
setSetting("litChGPIO", 1, 12);
setSetting("litChGPIO", 2, 13);
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
#elif defined(EUROMATE_WIFI_STECKER_SCHUKO)
// Euromate (?) Wifi Stecker Shuko
// https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706
// Thanks to @Geitde
// The relay in the device is not a bistable (latched) relay.
// The device is reported to have a flip-flop circuit to drive the relay
// So @Geitde hack is still the only possible
// Hack: drive GPIO12 low and use GPIO5 as normal relay pin:
setSetting("board", DEVICE_EUROMATE_WIFI_STECKER_SCHUKO);
setSetting("device", "EUROMATE_WIFI_STECKER_SCHUKO");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 14);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledGPIO", 1, 12);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(TONBUX_POWERSTRIP02)
setSetting("board", DEVICE_TONBUX_POWERSTRIP02);
setSetting("device", "TONBUX_POWERSTRIP02");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 5);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 1);
setSetting("ledGPIO", 0, 0); // 1 blue led
setSetting("ledGPIO", 1, 3); // 3 red leds
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 13);
setSetting("rlyGPIO", 2, 12);
setSetting("rlyGPIO", 3, 14);
setSetting("rlyGPIO", 4, 16); // Not a relay. USB ports on/off
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
setSetting("rlyType", 2, RELAY_TYPE_INVERSE);
setSetting("rlyType", 3, RELAY_TYPE_INVERSE);
setSetting("rlyType", 4, RELAY_TYPE_NORMAL); // Not a relay. USB ports on/off
#elif defined(LINGAN_SWA1)
setSetting("board", DEVICE_LINGAN_SWA1);
setSetting("device", "LINGAN_SWA1");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(HEYGO_HY02)
setSetting("board", DEVICE_HEYGO_HY02);
setSetting("device", "HEYGO_HY02");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(MAXCIO_WUS002S)
setSetting("board", DEVICE_MAXCIO_WUS002S);
setSetting("device", "MAXCIO_WUS002S");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 2);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 3);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 13);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 12);
setSetting("hlwCF1GPIO", 5);
setSetting("hlwCFGPIO", 4);
setSetting("hlwCurRes", 0.002);
setSetting("hlwVolResUp", 2000000);
#elif defined(YIDIAN_XSSSA05)
setSetting("board", DEVICE_YIDIAN_XSSSA05);
setSetting("device", "YIDIAN_XSSSA05");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledGPIO", 2, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwEnabled", 1);
setSetting("hlwSELGPIO", 3);
setSetting("hlwCF1GPIO", 14);
setSetting("hlwCFGPIO", 5);
setSetting("hlwCurRes", 0.001);
setSetting("hlwVolResUp", 2400000);
#elif defined(TONBUX_XSSSA06)
setSetting("board", DEVICE_TONBUX_XSSSA06);
setSetting("device", "TONBUX_XSSSA06");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 0); // Red
setSetting("ledGPIO", 0, 5); // Green
setSetting("ledGPIO", 0, 2); // Blue
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(GREEN_ESP8266RELAY)
// GREEN ESP8266 RELAY MODULE
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180323113846&SearchText=Green+ESP8266
setSetting("board", DEVICE_GREEN_ESP8266RELAY);
setSetting("device", "GREEN_ESP8266RELAY");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 5);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(IKE_ESPIKE)
// Henrique Gravina ESPIKE
// https://github.com/Henriquegravina/Espike
setSetting("board", DEVICE_IKE_ESPIKE);
setSetting("device", "IKE_ESPIKE");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnGPIO", 1, 12);
setSetting("btnGPIO", 2, 14);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnRelay", 2, 2);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 16);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
#elif defined(ARNIEX_SWIFITCH)
// SWIFITCH
// https://github.com/ArnieX/swifitch
setSetting("board", DEVICE_ARNIEX_SWIFITCH);
setSetting("device", "ARNIEX_SWIFITCH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 4);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
setSetting("btnRelay", 0, 1);
setSetting("btnPress", 0, BUTTON_MODE_NONE);
setSetting("btnClick", 0, BUTTON_MODE_TOGGLE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
setSetting("ledGPIO", 0, 12);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 5);
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
#elif defined(GENERIC_ESP01S_RELAY_V40)
// ESP-01S RELAY v4.0
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404024035&SearchText=esp-01s+relay
setSetting("board", DEVICE_GENERIC_ESP01S_RELAY_V40);
setSetting("device", "GENERIC_ESP01S_RELAY_V40");
setSetting("fw", ESPURNA_BASIC);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 0);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(GENERIC_ESP01S_RGBLED_V10)
// ESP-01S RGB LED v1.0 (some sold with ws2818)
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404023816&SearchText=esp-01s+led+controller
setSetting("board", DEVICE_GENERIC_ESP01S_RGBLED_V10);
setSetting("device", "GENERIC_ESP01S_RGBLED_V10");
setSetting("fw", ESPURNA_BASIC);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
#elif defined(HELTEC_TOUCHRELAY)
// Heltec Touch Relay
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180408043114&SearchText=esp8266+touch+relay
setSetting("board", DEVICE_HELTEC_TOUCHRELAY);
setSetting("device", "HELTEC_TOUCHRELAY");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 14);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 1);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(GENERIC_ESP01S_DHT11_V10)
// ESP-01S DHT11 v1.0
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105907&SearchText=esp-01s+dht11
setSetting("board", DEVICE_GENERIC_ESP01S_DHT11_V10);
setSetting("device", "GENERIC_ESP01S_DHT11_V10");
setSetting("fw", ESPURNA_SENSOR);
setSetting("dhtEnabled", 1);
setSetting("dhtGPIO", 0, 2);
setSetting("dhtType", 0, DHT_CHIP_DHT11);
#elif defined(GENERIC_ESP01S_DS18B20_V10)
// ESP-01S DS18B20 v1.0
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105933&SearchText=esp-01s+ds18b20
setSetting("board", DEVICE_GENERIC_ESP01S_DS18B20_V10);
setSetting("device", "GENERIC_ESP01S_DS18B20_V10");
setSetting("fw", ESPURNA_SENSOR);
setSetting("dsEnabled", 1);
setSetting("dsGPIO", 0, 2);
#elif defined(ZHILDE_EU44_W)
// Zhilde ZLD-EU44-W
// http://www.zhilde.com/product/60705150109-805652505/EU_WiFi_Surge_Protector_Extension_Socket_4_Outlets_works_with_Amazon_Echo_Smart_Power_Strip.html
setSetting("board", DEVICE_ZHILDE_EU44_W);
setSetting("device", "ZHILDE_EU44_W");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 3);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 1);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 5);
setSetting("rlyGPIO", 1, 4);
setSetting("rlyGPIO", 2, 12);
setSetting("rlyGPIO", 3, 13);
setSetting("rlyGPIO", 4, 14);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
setSetting("rlyType", 4, RELAY_TYPE_NORMAL);
// Based on the reporter, this product uses GPIO1 and 3 for the button
// and onboard LED, so hardware serial should be disabled...
setSetting("dbgSerial", 0);
#elif defined(ITEAD_SONOFF_POW_R2)
setSetting("board", DEVICE_ITEAD_SONOFF_POW_R2);
setSetting("device", "ITEAD_SONOFF_POW_R2");
setSetting("fw", ESPURNA_CSE77XX);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("cseEnabled", 1);
setSetting("cseGPIO", 1);
setSetting("dbgSerial", 0);
#elif defined(LUANI_HVIO)
// Luani HVIO
// https://luani.de/projekte/esp8266-hvio/
// https://luani.de/blog/esp8266-230v-io-modul/
setSetting("board", DEVICE_LUANI_HVIO);
setSetting("device", "LUANI_HVIO");
setSetting("fw", ESPURNA_BASIC);
setSetting("ledGPIO", 0, 15);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("btnGPIO", 0, 12);
setSetting("btnGPIO", 1, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS)
// Allnet 4duino ESP8266-UP-Relais
// http://www.allnet.de/de/allnet-brand/produkte/neuheiten/p/allnet-4duino-iot-wlan-relais-unterputz-esp8266-up-relais/
// https://shop.allnet.de/fileadmin/transfer/products/148814.pdf
setSetting("board", DEVICE_ALLNET_4DUINO_IOT_WLAN_RELAIS);
setSetting("device", "ALLNET_4DUINO_IOT_WLAN_RELAIS");
setSetting("fw", ESPURNA_BASIC);
setSetting("ledGPIO", 0, 0);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 14);
setSetting("rlyResetGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_LATCHED);
#elif defined(TONBUX_MOSQUITO_KILLER)
// Tonbux 50-100M Smart Mosquito Killer USB
// https://www.aliexpress.com/item/Original-Tonbux-50-100M-Smart-Mosquito-Killer-USB-Plug-No-Noise-Repellent-App-Smart-Module/32859330820.html
setSetting("board", DEVICE_TONBUX_MOSQUITO_KILLER);
setSetting("device", "TONBUX_MOSQUITO_KILLER");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 2);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 15);
setSetting("ledGPIO", 1, 14);
setSetting("ledGPIO", 2, 12);
setSetting("ledGPIO", 3, 16);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 3, GPIO_LOGIC_DIRECT);
setSetting("ledMode", 0, LED_MODE_WIFI);
setSetting("ledMode", 1, LED_MODE_RELAY);
setSetting("ledRelay", 1, 0);
setSetting("rlyGPIO", 0, 5); // Fan
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(NEO_COOLCAM_NAS_WR01W)
// NEO Coolcam NAS-WR01W Wifi Smart Power Plug
// https://es.aliexpress.com/item/-/32854589733.html?spm=a219c.12010608.0.0.6d084e68xX0y5N
// https://www.fasttech.com/product/9649426-neo-coolcam-nas-wr01w-wifi-smart-power-plug-eu
setSetting("board", DEVICE_NEO_COOLCAM_NAS_WR01W);
setSetting("device", "NEO_COOLCAM_NAS_WR01W");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 4);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(PILOTAK_ESP_DIN_V1)
// ESP-DIN relay board V1
// https://github.com/pilotak/esp_din
setSetting("board", DEVICE_PILOTAK_ESP_DIN_V1);
setSetting("device", "PILOTAK_ESP_DIN_V1");
setSetting("fw", ESPURNA_SENSOR);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 15);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("digEnabled", 1);
setSetting("digGPIO", 0, 16);
setSetting("digMode", 0, INPUT);
setSetting("dsEnabled", 1);
setSetting("dsGPIO", 0, 2);
setSetting("i2cEnable", 1);
setSetting("i2cSDAGPIO", 12);
setSetting("i2cSCLGPIO", 13);
setSetting("rfEnabled", 1);
setSetting("rfGPIO", 14);
#elif defined(ESTINK_WIFI_POWER_STRIP)
// Estink Wifi Power Strip
// https://www.amazon.de/Steckdosenleiste-Ladeger%C3%A4t-Sprachsteuerung-SmartphonesTablets-Android/dp/B0796W5FZY
// Fornorm Wi-Fi USB Extension Socket (ZLD-34EU)
// https://www.aliexpress.com/item/Fornorm-WiFi-Extension-Socket-with-Surge-Protector-Smart-Power-Strip-3-Outlets-and-4-USB-Charging/32849743948.html
setSetting("board", DEVICE_ESTINK_WIFI_POWER_STRIP);
setSetting("device", "ESTINK_WIFI_POWER_STRIP");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 16);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 3);
setSetting("ledGPIO", 0, 0);
setSetting("ledGPIO", 1, 12);
setSetting("ledGPIO", 2, 3);
setSetting("ledGPIO", 3, 5);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 2, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 3, GPIO_LOGIC_INVERSE);
setSetting("ledMode", 0, LED_MODE_FINDME);
setSetting("ledMode", 1, LED_MODE_FOLLOW);
setSetting("ledMode", 2, LED_MODE_FOLLOW);
setSetting("ledMode", 3, LED_MODE_FOLLOW);
setSetting("ledRelay", 1, 1);
setSetting("ledRelay", 2, 2);
setSetting("ledRelay", 3, 3);
setSetting("rlyGPIO", 0, 14); // USB power
setSetting("rlyGPIO", 1, 13); // power plug 1
setSetting("rlyGPIO", 2, 4); // power plug 2
setSetting("rlyGPIO", 3, 15); // power plug 3
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
// Disable UART noise since this board uses GPIO3
setSetting("dbgSerial", 0);
#elif defined(BH_ONOFRE)
// Bruno Horta's OnOfre
// https://www.bhonofre.pt/
// https://github.com/brunohorta82/BH_OnOfre/
setSetting("board", DEVICE_BH_ONOFRE);
setSetting("device", "BH_ONOFRE");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 12);
setSetting("btnGPIO", 1, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(BLITZWOLF_BWSHP2)
// Several devices under different names uing a power chip labelled BL0937 or HJL-01
// * Blitzwolf (https://www.amazon.es/Inteligente-Temporización-Dispositivos-Cualquier-BlitzWolf/dp/B07BMQP142)
// * HomeCube (https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG)
// * Coosa (https://www.amazon.com/COOSA-Monitoring-Function-Campatible-Assiatant/dp/B0788W9TDR)
// * Goosund (http://www.gosund.com/?m=content&c=index&a=show&catid=6&id=5)
// * Ablue (https://www.amazon.de/Intelligente-Steckdose-Ablue-Funktioniert-Assistant/dp/B076DRFRZC)
setSetting("board", DEVICE_BLITZWOLF_BWSHP2);
setSetting("device", "BLITZWOLF_BWSHP2");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledGPIO", 1, 0);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
setSetting("ledMode", 0, LED_MODE_WIFI);
setSetting("ledMode", 1, LED_MODE_FINDME);
setSetting("ledRelay", 1, 0);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwSELGPIO", 12);
setSetting("hlwCF1GPIO", 14);
setSetting("hlwCFGPIO", 5);
setSetting("hlwCurSel", LOW);
setSetting("hlwIntMode", FALLING);
setSetting("curRatio", 25740);
setSetting("volRatio", 313400);
setSetting("pwrRatio", 3414290);
#elif defined(HOMECUBE_16A)
// Homecube 16A is similar to BLITZWOLF_BWSHP2 but some pins differ and it also has RGB LEDs
// https://www.amazon.de/gp/product/B07D7RVF56/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
setSetting("board", DEVICE_HOMECUBE_16A);
setSetting("device", "HOMECUBE_16A");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledGPIO", 1, 12);
setSetting("ledGPIO", 2, 0);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 1, GPIO_LOGIC_DIRECT);
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
setSetting("ledMode", 0, LED_MODE_WIFI);
setSetting("ledMode", 1, LED_MODE_FINDME);
setSetting("ledMode", 2, LED_MODE_OFF);
setSetting("ledRelay", 1, 0);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwSELGPIO", 16);
setSetting("hlwCF1GPIO", 14);
setSetting("hlwCFGPIO", 5);
setSetting("hlwCurSel", LOW);
setSetting("hlwIntMode", FALLING);
setSetting("curRatio", 25740);
setSetting("volRatio", 313400);
setSetting("pwrRatio", 3414290);
#elif defined(TINKERMAN_ESPURNA_SWITCH)
setSetting("board", DEVICE_TINKERMAN_ESPURNA_SWITCH);
setSetting("device", "TINKERMAN_ESPURNA_SWITCH");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 4);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(ITEAD_SONOFF_S31)
setSetting("board", DEVICE_ITEAD_SONOFF_S31);
setSetting("device", "ITEAD_SONOFF_S31");
setSetting("fw", ESPURNA_CSE77XX);
setSetting("btnGPIO", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("cseEnabled", 1);
setSetting("cseGPIO", 1);
setSetting("dbgSerial", 0);
#elif defined(STM_RELAY)
setSetting("board", DEVICE_STM_RELAY);
setSetting("device", "STM_RELAY");
setSetting("fw", ESPURNA_STM);
setSetting("rlyDummy", 2);
setSetting("rlyProvider", RELAY_PROVIDER_STM);
setSetting("dbgSerial", 0);
#elif defined(VANZAVANZU_SMART_WIFI_PLUG_MINI)
// VANZAVANZU Smart Outlet Socket (based on BL0937 or HJL-01)
// https://www.amazon.com/Smart-Plug-Wifi-Mini-VANZAVANZU/dp/B078PHD6S5
setSetting("board", DEVICE_VANZAVANZU_SMART_WIFI_PLUG_MINI);
setSetting("device", "VANZAVANZU_SMART_WIFI_PLUG_MINI");
setSetting("fw", ESPURNA_HLW8012);
setSetting("btnGPIO", 0, 13);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
setSetting("btnRelay", 0, 0);
setSetting("ledGPIO", 0, 2);
setSetting("ledGPIO", 1, 0);
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
setSetting("ledMode", 0, LED_MODE_WIFI);
setSetting("ledMode", 1, LED_MODE_FINDME);
setSetting("ledRelay", 1, 0);
setSetting("rlyGPIO", 0, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("hlwSELGPIO", 3);
setSetting("hlwCF1GPIO", 14);
setSetting("hlwCFGPIO", 5);
setSetting("hlwCurSel", LOW);
setSetting("hlwIntMode", FALLING);
setSetting("curRatio", 25740);
setSetting("volRatio", 313400);
setSetting("pwrRatio", 3414290);
setSetting("dbgSerial", 0);
#elif defined(GENERIC_GEIGER_COUNTER)
setSetting("board", DEVICE_GENERIC_GEIGER_COUNTER);
setSetting("device", "GENERIC_GEIGER_COUNTER");
setSetting("fw", ESPURNA_GEIGER);
setSetting("geiEnabled", 1);
setSetting("geiGPIO", 5);
#elif defined(TINKERMAN_RFM69GW)
// Check http://tinkerman.cat/rfm69-wifi-gateway/
setSetting("board", DEVICE_TINKERMAN_RFM69GW);
setSetting("device", "TINKERMAN_RFM69GW");
setSetting("fw", ESPURNA_RFM69);
setSetting("btnGPIO", 0, 0);
setSetting("rfm69Enabled", 1);
setSetting("rfm69CSGPIO", 15);
setSetting("rfm69IRQGPIO", 5);
setSetting("rfm69ResetGPIO", 7);
setSetting("rfm69HW", 0);
#elif defined(ITEAD_SONOFF_IFAN02)
setSetting("board", DEVICE_ITEAD_SONOFF_IFAN02);
setSetting("device", "ITEAD_SONOFF_IFAN02");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 0);
setSetting("btnGPIO", 1, 9);
setSetting("btnGPIO", 2, 10);
setSetting("btnGPIO", 3, 14);
setSetting("ledGPIO", 0, 13);
setSetting("ledLogic", 0, 1);
setSetting("ledMode", 0, LED_MODE_WIFI);
setSetting("rlyGPIO", 0, 12);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyGPIO", 2, 4);
setSetting("rlyGPIO", 3, 15);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
#elif defined(GENERIC_AG_L4)
setSetting("board", DEVICE_GENERIC_AG_L4);
setSetting("device", "GENERIC_AG_L4");
setSetting("fw", ESPURNA_DIMMER);
setSetting("btnGPIO", 0, 4);
setSetting("btnGPIO", 1, 2);
setSetting("btnRelay", 0, 0);
setSetting("btnMode", 0, BUTTON_PUSHBUTTON);
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
setSetting("btnClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
setSetting("ledGPIO", 0, 5);
setSetting("ledGPIO", 1, 16);
setSetting("ledLogic", 0, 0);
setSetting("ledLogic", 1, 1);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChGPIO", 0, 14);
setSetting("litChGPIO", 1, 13);
setSetting("litChGPIO", 2, 12);
setSetting("litChLogic", 0, 0);
setSetting("litChLogic", 1, 0);
setSetting("litChLogic", 2, 0);
#elif defined(LOHAS_9W)
setSetting("board", DEVICE_LOHAS_9W);
setSetting("device", "LOHAS_9W");
setSetting("fw", ESPURNA_MY92XX);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("rlyDummy", 1);
setSetting("litChFactor", 4, 0.1); // White LEDs are way more bright
setSetting("litChFactor", 5, 0.1); // White LEDs are way more bright
setSetting("myModel", 1); // 3 channels per chip
setSetting("myChips", 2);
setSetting("myDIGPIO", 13);
setSetting("myDCKIGPIO", 15);
setSetting("myMapping", "01234"); // TODO
#elif defined(ALLTERCO_SHELLY1)
setSetting("board", DEVICE_ALLTERCO_SHELLY1);
setSetting("device", "ALLTERCO_SHELLY1");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 5);
setSetting("btnMode", 0, BUTTON_SWITCH);
setSetting("btnRelay", 0, 0);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
#elif defined(XIAOMI_SMART_DESK_LAMP)
setSetting("board", DEVICE_XIAOMI_SMART_DESK_LAMP);
setSetting("device", "XIAOMI_SMART_DESK_LAMP");
setSetting("fw", ESPURNA_DIMMER);
setSetting("btnGPIO", 0, 2);
setSetting("btnGPIO", 1, 14);
setSetting("btnRelay", 0, 0);
setSetting("btnLngDelay", 500);
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
setSetting("btnDblClick", 1, BUTTON_MODE_AP);
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("litChGPIO", 0, 5);
setSetting("litChGPIO", 1, 4);
setSetting("litChLogic", 0, 0);
setSetting("litChLogic", 1, 0);
setSetting("enc1stGPIO", 0, 12);
setSetting("enc2ndGPIO", 0, 13);
setSetting("encBtnGPIO", 0, 2);
setSetting("encMode", ENCODER_MODE_RATIO);
#elif defined(ALLTERCO_SHELLY2)
setSetting("board", DEVICE_ALLTERCO_SHELLY2);
setSetting("device", "ALLTERCO_SHELLY2");
setSetting("fw", ESPURNA_BASIC);
setSetting("btnGPIO", 0, 12);
setSetting("btnGPIO", 1, 14);
setSetting("btnMode", 0, BUTTON_SWITCH);
setSetting("btnMode", 1, BUTTON_SWITCH);
setSetting("btnRelay", 0, 0);
setSetting("btnRelay", 1, 1);
setSetting("rlyGPIO", 0, 4);
setSetting("rlyGPIO", 1, 5);
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
#elif defined(PHYX_ESP12_RGB)
setSetting("board", DEVICE_PHYX_ESP12_RGB);
setSetting("device", "PHYX_ESP12_RGB");
setSetting("fw", ESPURNA_DIMMER);
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
setSetting("litChGPIO", 0, 4);
setSetting("litChGPIO", 1, 14);
setSetting("litChGPIO", 2, 12);
setSetting("litChLogic", 0, 0);
setSetting("litChLogic", 1, 0);
setSetting("litChLogic", 3, 0);
#endif
}
void _deviceMigrateMoveIndexDown(const char * key, int offset = 0) {
if (hasSetting(key, 0)) return;
for (unsigned char index = 1; index < SETTINGS_MAX_LIST_COUNT; index++) {
if (hasSetting(key, index)) {
setSetting(key, index - 1, getSetting(key, index).toInt() + offset);
} else {
delSetting(key, index - 1);
}
}
}
// Configuration versions
//
// 1: based on Embedis, no board definitions
// 2: based on Embedis, with board definitions 1-based
// 3: based on Embedis, with board definitions 0-based
// 4: based on Embedis, added sensors and force resetting
void _deviceMigrate() {
moveSetting("boardName", "device");
moveSettings("relayGPIO", "rlyGPIO");
moveSettings("relayResetGPIO", "rlyResetGPIO");
moveSettings("relayType", "rlyType");
moveSetting("selGPIO", "hlwSELGPIO");
moveSetting("cfGPIO", "hlwCFGPIO");
moveSetting("cf1GPIO", "hlwCF1GPIO");
moveSetting("relayProvider", "rlyProvider");
moveSetting("relays", "rlyDummy");
moveSettings("chGPIO", "litChGPIO");
moveSettings("chLogic", "litChLogic");
moveSetting("enGPIO", "litEnableGPIO");
moveSetting("hlwSelC", "hlwCurLevel");
moveSetting("hlwIntM", "hlwInt");
delSetting("ledWifi");
delSetting("lightProvider");
delSetting("litProvider");
// Get config version
unsigned int board = getSetting("board", 0).toInt();
unsigned int config_version = getSetting("cfg", board > 0 ? 2 : 1).toInt();
setSetting("cfg", CFG_VERSION);
if (config_version == 2) {
_deviceMigrateMoveIndexDown("ledGPIO");
_deviceMigrateMoveIndexDown("ledLogic");
_deviceMigrateMoveIndexDown("btnGPIO");
_deviceMigrateMoveIndexDown("btnRelay", -1);
_deviceMigrateMoveIndexDown("rlyGPIO");
_deviceMigrateMoveIndexDown("rlyType");
}
}
void _deviceSpecific() {
// These devices use the hardware UART
// to communicate to secondary microcontrollers
#if \
(ESPURNA_IMAGE == ESPURNA_SONOFF_RFBRIDGE) || \
(ESPURNA_IMAGE == ESPURNA_SONOFF_DUAL) || \
(ESPURNA_IMAGE == ESPURNA_STM)
unsigned long speed = getSetting("dbgSpeed", DEBUG_SERIAL_SPEED).toInt();
Serial.begin(speed);
#endif
}
// -----------------------------------------------------------------------------
void deviceSetup() {
_deviceMigrate();
_deviceLoad();
_deviceSpecific();
// Check match firmware-configuration
// At the time being, this will always match.
// In the future, custom loaded configuration
// might not match loaded firmware image
if (getSetting("fw", ESPURNA_CORE).toInt() != ESPURNA_IMAGE) {
DEBUG_MSG_P(PSTR("[HW] Configuration does not match firmware image!!!"));
}
}