You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
421 lines
14 KiB
421 lines
14 KiB
// -----------------------------------------------------------------------------
|
|
// Configuration HELP
|
|
// -----------------------------------------------------------------------------
|
|
//
|
|
// MANUFACTURER: Name of the manufacturer of the board ("string")
|
|
// DEVICE: Name of the device ("string")
|
|
// BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)
|
|
// BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)
|
|
// BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)
|
|
// - BUTTON_PUSHBUTTON: button event is fired when released
|
|
// - BUTTON_SWITCH: button event is fired when pressed or released
|
|
// - BUTTON_DEFAULT_HIGH: there is a pull up in place
|
|
// - BUTTON_SET_PULLUP: set pullup by software
|
|
// RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)
|
|
// RELAY#_PIN_INVERSE: Relay has inversed logic (closed or ON when pulled down)
|
|
// RELAY#_LED: LED number that will be bind to the n-th relay (1-based)
|
|
// LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)
|
|
// LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)
|
|
// WIFI_LED: LED number that will used for WIFI notifications (1-based, defaults to 1)
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Development boards
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#if defined(NODEMCUV2)
|
|
|
|
#define MANUFACTURER "NODEMCU"
|
|
#define DEVICE "LOLIN"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_LNGCLICK BUTTON_MODE_PULSE
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 2
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(D1_RELAYSHIELD)
|
|
|
|
#define MANUFACTURER "WEMOS"
|
|
#define DEVICE "D1_MINI"
|
|
#define RELAY1_PIN 5
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 2
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Itead Studio boards
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(SONOFF)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(SONOFF_TH)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_TH"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(SONOFF_SV)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_SV"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(SLAMPHER)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SLAMPHER"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(S20)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "S20"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(SONOFF_TOUCH)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_TOUCH"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(SONOFF_POW)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_POW"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 15
|
|
#define LED1_PIN_INVERSE 0
|
|
#define ENABLE_POW 1
|
|
|
|
#elif defined(SONOFF_DUAL)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_DUAL"
|
|
#define BUTTON3_RELAY 1
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
#undef SERIAL_BAUDRATE
|
|
#define SERIAL_BAUDRATE 19230
|
|
#undef RELAY_PROVIDER
|
|
#define RELAY_PROVIDER RELAY_PROVIDER_DUAL
|
|
|
|
#elif defined(SONOFF_4CH)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "SONOFF_4CH"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON2_PIN 9
|
|
#define BUTTON2_RELAY 2
|
|
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON3_PIN 10
|
|
#define BUTTON3_RELAY 3
|
|
#define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON4_PIN 14
|
|
#define BUTTON4_RELAY 4
|
|
#define BUTTON4_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define RELAY2_PIN 5
|
|
#define RELAY2_PIN_INVERSE 0
|
|
#define RELAY3_PIN 4
|
|
#define RELAY3_PIN_INVERSE 0
|
|
#define RELAY4_PIN 15
|
|
#define RELAY4_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(ITEAD_1CH_INCHING)
|
|
|
|
// The inching functionality is managed by a misterious IC in the board.
|
|
// You cannot control the inching button and functionality from the ESP8266
|
|
// Besides, enabling the inching functionality using the hardware button
|
|
// will result in the relay switching on and off continuously.
|
|
// Fortunately the unkown IC keeps memory of the hardware inching status
|
|
// so you can just disable it and forget. The inching LED must be lit.
|
|
// You can still use the pulse options from the web interface
|
|
// without problem.
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "1CH_INCHING"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
#elif defined(ITEAD_MOTOR)
|
|
|
|
#define MANUFACTURER "ITEAD"
|
|
#define DEVICE "MOTOR"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 13
|
|
#define LED1_PIN_INVERSE 1
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Electrodragon boards
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(ESP_RELAY_BOARD)
|
|
|
|
#define MANUFACTURER "ELECTRODRAGON"
|
|
#define DEVICE "ESP_RELAY_BOARD"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON2_PIN 2
|
|
#define BUTTON2_RELAY 2
|
|
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define RELAY2_PIN 13
|
|
#define RELAY2_PIN_INVERSE 0
|
|
#define LED1_PIN 16
|
|
#define LED1_PIN_INVERSE 0
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// WorkChoice ecoPlug
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(ECOPLUG)
|
|
|
|
#define MANUFACTURER "WORKCHOICE"
|
|
#define DEVICE "ECOPLUG"
|
|
#define BUTTON1_PIN 13
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 15
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 2
|
|
#define LED1_PIN_INVERSE 0
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// AI Thinker
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(AI_LIGHT)
|
|
|
|
#define MANUFACTURER "AI THINKER"
|
|
#define DEVICE "AI LIGHT"
|
|
#undef RELAY_PROVIDER
|
|
#define RELAY_PROVIDER RELAY_PROVIDER_MY9291
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Jan Goedeke Wifi Relay
|
|
// https://github.com/JanGoe/esp8266-wifi-relay
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(WIFI_RELAY_NC)
|
|
|
|
#define MANUFACTURER "JAN_GOEDEKE"
|
|
#define DEVICE "WIFI_RELAY_NC"
|
|
#define BUTTON1_PIN 12
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON2_PIN 13
|
|
#define BUTTON2_RELAY 2
|
|
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 2
|
|
#define RELAY1_PIN_INVERSE 1
|
|
#define RELAY2_PIN 14
|
|
#define RELAY2_PIN_INVERSE 1
|
|
|
|
#elif defined(WIFI_RELAY_NO)
|
|
|
|
#define MANUFACTURER "JAN_GOEDEKE"
|
|
#define DEVICE "WIFI_RELAY_NO"
|
|
#define BUTTON1_PIN 12
|
|
#define BUTTON1_RELAY 1
|
|
#define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define BUTTON2_PIN 13
|
|
#define BUTTON2_RELAY 2
|
|
#define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
|
|
#define RELAY1_PIN 2
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define RELAY2_PIN 14
|
|
#define RELAY2_PIN_INVERSE 0
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Jorge García Wifi+Relays Board Kit
|
|
// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit
|
|
// https://github.com/jorgegarciadev/wifikit
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(WIFI_RELAYS_BOARD_KIT)
|
|
|
|
#define MANUFACTURER "JORGE_GARCIA"
|
|
#define DEVICE "WIFI_RELAYS_BOARD_KIT"
|
|
#define RELAY1_PIN 0
|
|
#define RELAY1_PIN_INVERSE 1
|
|
#define RELAY2_PIN 2
|
|
#define RELAY2_PIN_INVERSE 1
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// WiFi MQTT Relay / Thermostat
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#elif defined(MQTT_RELAY)
|
|
|
|
#define MANUFACTURER "OPENENERGYMONITOR"
|
|
#define DEVICE "MQTT_RELAY"
|
|
#define BUTTON1_PIN 0
|
|
#define BUTTON1_RELAY 1
|
|
#define RELAY1_PIN 12
|
|
#define RELAY1_PIN_INVERSE 0
|
|
#define LED1_PIN 16
|
|
#define LED1_PIN_INVERSE 0
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Unknown hardware
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#else
|
|
#error "UNSUPPORTED HARDWARE!"
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Default values
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef BUTTON1_PRESS
|
|
#define BUTTON1_PRESS BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON2_PRESS
|
|
#define BUTTON2_PRESS BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON3_PRESS
|
|
#define BUTTON3_PRESS BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON4_PRESS
|
|
#define BUTTON4_PRESS BUTTON_MODE_NONE
|
|
#endif
|
|
|
|
#ifndef BUTTON1_CLICK
|
|
#define BUTTON1_CLICK BUTTON_MODE_TOGGLE
|
|
#endif
|
|
#ifndef BUTTON2_CLICK
|
|
#define BUTTON2_CLICK BUTTON_MODE_TOGGLE
|
|
#endif
|
|
#ifndef BUTTON3_CLICK
|
|
#define BUTTON3_CLICK BUTTON_MODE_TOGGLE
|
|
#endif
|
|
#ifndef BUTTON4_CLICK
|
|
#define BUTTON4_CLICK BUTTON_MODE_TOGGLE
|
|
#endif
|
|
|
|
#ifndef BUTTON1_DBLCLICK
|
|
#define BUTTON1_DBLCLICK BUTTON_MODE_AP
|
|
#endif
|
|
#ifndef BUTTON2_DBLCLICK
|
|
#define BUTTON2_DBLCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON3_DBLCLICK
|
|
#define BUTTON3_DBLCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON4_DBLCLICK
|
|
#define BUTTON4_DBLCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
|
|
#ifndef BUTTON1_LNGCLICK
|
|
#define BUTTON1_LNGCLICK BUTTON_MODE_RESET
|
|
#endif
|
|
#ifndef BUTTON2_LNGCLICK
|
|
#define BUTTON2_LNGCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON3_LNGCLICK
|
|
#define BUTTON3_LNGCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
#ifndef BUTTON4_LNGCLICK
|
|
#define BUTTON4_LNGCLICK BUTTON_MODE_NONE
|
|
#endif
|
|
|
|
#ifndef BUTTON1_RELAY
|
|
#define BUTTON1_RELAY 0
|
|
#endif
|
|
#ifndef BUTTON2_RELAY
|
|
#define BUTTON2_RELAY 0
|
|
#endif
|
|
#ifndef BUTTON3_RELAY
|
|
#define BUTTON3_RELAY 0
|
|
#endif
|
|
#ifndef BUTTON4_RELAY
|
|
#define BUTTON4_RELAY 0
|
|
#endif
|
|
|
|
#ifndef RELAY1_LED
|
|
#define RELAY1_LED 0
|
|
#endif
|
|
#ifndef RELAY2_LED
|
|
#define RELAY2_LED 0
|
|
#endif
|
|
#ifndef RELAY3_LED
|
|
#define RELAY3_LED 0
|
|
#endif
|
|
#ifndef RELAY4_LED
|
|
#define RELAY4_LED 0
|
|
#endif
|
|
|
|
#ifndef WIFI_LED
|
|
#define WIFI_LED 1
|
|
#endif
|
|
|
|
// Needed for ESP8285 boards under Windows using PlatformIO (?)
|
|
#ifndef BUTTON_PUSHBUTTON
|
|
#define BUTTON_PUSHBUTTON 0
|
|
#define BUTTON_SWITCH 1
|
|
#define BUTTON_DEFAULT_HIGH 2
|
|
#define BUTTON_SET_PULLUP 4
|
|
#endif
|