qmk_firmware/keyboards/naked48/rev1/config.h

/*
Copyright 2021 Salicylic_Acid

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

/* USB Device descriptor parameter */
#define VENDOR_ID       0x04D8
#define PRODUCT_ID      0xE8BA
#define DEVICE_VER      0x0001
#define MANUFACTURER    Salicylic_Acid
#define PRODUCT         naked48

/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 12

// wiring of each half
#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, B4, B5 }
// When using Nafuda, comment out MATRIX_ROW_PINS_RIGHT and MATRIX_COL_PINS_RIGHT.
#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6 }
#define MATRIX_COL_PINS_RIGHT { F4, F5, F6, F7, B1, B3, B2, B6, B4, B5, B2, B2 }

#define DIODE_DIRECTION COL2ROW

/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5

/* serial.c configuration for split keyboard */
#define SOFT_SERIAL_PIN D2

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* ws2812 RGB LED */
#define RGB_DI_PIN D3

#ifndef RGBLED_NUM
  #define RGBLED_NUM 48
#endif

#define RGBLIGHT_ANIMATIONS

#ifndef IOS_DEVICE_ENABLE
  #define RGBLIGHT_LIMIT_VAL 180
  #define RGBLIGHT_VAL_STEP 17
#else
  #define RGBLIGHT_LIMIT_VAL 50
  #define RGBLIGHT_VAL_STEP 4
#endif
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17

#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for naked48 keyboard
//  120  RGBoff, OLEDoff
//  120  OLED
//  330  RGB 6
//  300  RGB 32
//  310  OLED & RGB 32
  #define USB_MAX_POWER_CONSUMPTION 400
#else
  // fix iPhone and iPad power adapter issue
  // iOS device need lessthan 100
  #define USB_MAX_POWER_CONSUMPTION 100
#endif