- # unicomp/classic_ultracl_pre_2013/overnumpad_1xb
-
- ![unicomp/classic_ultracl_pre_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg)
-
- Will support the following Unicomp Classic and Ultra Classic keyboards:
- * 104-key ANSI and 105-key ISO keyboards with post-2013 bottom row are supported.
-
- * Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei)
- * Hardware Supported: OverNumpad controller v1.Xb
- * Hardware Availability:
- * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb)
- * [keyboard](https://www.pckeyboard.com/)
-
- To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in.
- It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard.
- If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode.
-
- Make example for this keyboard (after setting up your build environment):
-
- make unicomp/classic_ultracl_pre_2013/overnumpad_1xb:default
-
- Flashing example for this keyboard:
-
- make unicomp/classic_ultracl_pre_2013/overnumpad_1xb:default:flash
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|