|
|
- /*
- Copyright 2019 Luciano M
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x0000
- #define DEVICE_VER 0x0001
- #define MANUFACTURER Luciano M
- #define PRODUCT Meson
-
- /* key matrix size */
- #define MATRIX_ROWS 8 // 4 rows each half
- #define MATRIX_COLS 7
-
- #define MATRIX_ROW_PINS { F7, C6, F6, F5 }
- #define MATRIX_COL_PINS { D4, D7, E6, B3, B2, B6, F4 }
- // #define UNUSED_PINS
-
- /* COL2ROW, ROW2COL*/
- #define DIODE_DIRECTION COL2ROW
-
- #define USE_I2C
- #define SOFT_SERIAL_PIN D0
-
- #define RGB_DI_PIN B5
- #ifdef RGB_DI_PIN
- #define RGBLED_NUM 10
- #define RGBLIGHT_SPLIT
- #define RGBLED_SPLIT { 5, 5 }
- #define RGBLIGHT_HUE_STEP 8
- #define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- /*== all animations enable ==*/
- #define RGBLIGHT_ANIMATIONS
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
- #endif
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
- // #define GRAVE_ESC_CTRL_OVERRIDE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
- /* key combination for magic key command */
- /* defined by default; to change, uncomment and set to the combination you want */
- // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
- /* control how magic key switches layers */
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
- /* override magic key keymap */
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
- //#define MAGIC_KEY_HELP H
- //#define MAGIC_KEY_HELP_ALT SLASH
- //#define MAGIC_KEY_DEBUG D
- //#define MAGIC_KEY_DEBUG_MATRIX X
- //#define MAGIC_KEY_DEBUG_KBD K
- //#define MAGIC_KEY_DEBUG_MOUSE M
- //#define MAGIC_KEY_VERSION V
- //#define MAGIC_KEY_STATUS S
- //#define MAGIC_KEY_CONSOLE C
- //#define MAGIC_KEY_LAYER0 0
- //#define MAGIC_KEY_LAYER0_ALT GRAVE
- //#define MAGIC_KEY_LAYER1 1
- //#define MAGIC_KEY_LAYER2 2
- //#define MAGIC_KEY_LAYER3 3
- //#define MAGIC_KEY_LAYER4 4
- //#define MAGIC_KEY_LAYER5 5
- //#define MAGIC_KEY_LAYER6 6
- //#define MAGIC_KEY_LAYER7 7
- //#define MAGIC_KEY_LAYER8 8
- //#define MAGIC_KEY_LAYER9 9
- //#define MAGIC_KEY_BOOTLOADER B
- //#define MAGIC_KEY_BOOTLOADER_ALT ESC
- //#define MAGIC_KEY_LOCK CAPS
- //#define MAGIC_KEY_EEPROM E
- //#define MAGIC_KEY_EEPROM_CLEAR BSPACE
- //#define MAGIC_KEY_NKRO N
- //#define MAGIC_KEY_SLEEP_LED Z
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
-
- /* Bootmagic Lite key configuration */
- // #define BOOTMAGIC_LITE_ROW 0
- // #define BOOTMAGIC_LITE_COLUMN 0
|