You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

240 lines
7.9 KiB

  1. /*
  2. Copyright 2018 Jack Hildebrandt
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #pragma once
  15. #include "config_common.h"
  16. /* USB Device descriptor parameter */
  17. #define VENDOR_ID 0x1EEE
  18. #define PRODUCT_ID 0x1313
  19. #define DEVICE_VER 0x0001
  20. #define MANUFACTURER Jsck
  21. #define PRODUCT Tennie
  22. #define DESCRIPTION Ten key macropad
  23. /* key matrix size */
  24. #define MATRIX_ROWS 3
  25. #define MATRIX_COLS 4
  26. /*
  27. * Keyboard Matrix Assignments
  28. *
  29. * Change this to how you wired your keyboard
  30. * COLS: AVR pins used for columns, left to right
  31. * ROWS: AVR pins used for rows, top to bottom
  32. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  33. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  34. *
  35. */
  36. #define MATRIX_ROW_PINS { C6, D4, D0}
  37. #define MATRIX_COL_PINS { D7, E6, B4, B5 }
  38. #define UNUSED_PINS { B1, B2, B3, B6, F4, F5, F6, F7 D1}
  39. /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
  40. #define DIODE_DIRECTION COL2ROW
  41. /*
  42. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  43. */
  44. //#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
  45. // #define BACKLIGHT_PIN B7
  46. // #define BACKLIGHT_BREATHING
  47. // #define BACKLIGHT_LEVELS 3
  48. #define RGBW
  49. #define RGB_DI_PIN D1
  50. #ifdef RGB_DI_PIN
  51. #define RGBLED_NUM 1
  52. #define RGBLIGHT_HUE_STEP 8
  53. #define RGBLIGHT_SAT_STEP 8
  54. #define RGBLIGHT_VAL_STEP 8
  55. #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
  56. // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
  57. // /*== all animations enable ==*/
  58. #define RGBLIGHT_ANIMATIONS
  59. // /*== or choose animations ==*/
  60. // #define RGBLIGHT_EFFECT_BREATHING
  61. // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
  62. // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
  63. // #define RGBLIGHT_EFFECT_SNAKE
  64. // #define RGBLIGHT_EFFECT_KNIGHT
  65. // #define RGBLIGHT_EFFECT_CHRISTMAS
  66. // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
  67. // #define RGBLIGHT_EFFECT_RGB_TEST
  68. // #define RGBLIGHT_EFFECT_ALTERNATING
  69. #endif
  70. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  71. #define DEBOUNCE 5
  72. /* define if matrix has ghost (lacks anti-ghosting diodes) */
  73. //#define MATRIX_HAS_GHOST
  74. /* number of backlight levels */
  75. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  76. #define LOCKING_SUPPORT_ENABLE
  77. /* Locking resynchronize hack */
  78. #define LOCKING_RESYNC_ENABLE
  79. /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  80. * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  81. */
  82. // #define GRAVE_ESC_CTRL_OVERRIDE
  83. /*
  84. * Force NKRO
  85. *
  86. * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
  87. * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
  88. * makefile for this to work.)
  89. *
  90. * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
  91. * until the next keyboard reset.
  92. *
  93. * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
  94. * fully operational during normal computer usage.
  95. *
  96. * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
  97. * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
  98. * bootmagic, NKRO mode will always be enabled until it is toggled again during a
  99. * power-up.
  100. *
  101. */
  102. //#define FORCE_NKRO
  103. /*
  104. * Magic Key Options
  105. *
  106. * Magic keys are hotkey commands that allow control over firmware functions of
  107. * the keyboard. They are best used in combination with the HID Listen program,
  108. * found here: https://www.pjrc.com/teensy/hid_listen.html
  109. *
  110. * The options below allow the magic key functionality to be changed. This is
  111. * useful if your keyboard/keypad is missing keys and you want magic key support.
  112. *
  113. */
  114. /* control how magic key switches layers */
  115. //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
  116. //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
  117. //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
  118. /* override magic key keymap */
  119. //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
  120. //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
  121. //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
  122. //#define MAGIC_KEY_HELP1 H
  123. //#define MAGIC_KEY_HELP2 SLASH
  124. //#define MAGIC_KEY_DEBUG D
  125. //#define MAGIC_KEY_DEBUG_MATRIX X
  126. //#define MAGIC_KEY_DEBUG_KBD K
  127. //#define MAGIC_KEY_DEBUG_MOUSE M
  128. //#define MAGIC_KEY_VERSION V
  129. //#define MAGIC_KEY_STATUS S
  130. //#define MAGIC_KEY_CONSOLE C
  131. //#define MAGIC_KEY_LAYER0_ALT1 ESC
  132. //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
  133. //#define MAGIC_KEY_LAYER0 0
  134. //#define MAGIC_KEY_LAYER1 1
  135. //#define MAGIC_KEY_LAYER2 2
  136. //#define MAGIC_KEY_LAYER3 3
  137. //#define MAGIC_KEY_LAYER4 4
  138. //#define MAGIC_KEY_LAYER5 5
  139. //#define MAGIC_KEY_LAYER6 6
  140. //#define MAGIC_KEY_LAYER7 7
  141. //#define MAGIC_KEY_LAYER8 8
  142. //#define MAGIC_KEY_LAYER9 9
  143. //#define MAGIC_KEY_BOOTLOADER PAUSE
  144. //#define MAGIC_KEY_LOCK CAPS
  145. //#define MAGIC_KEY_EEPROM E
  146. //#define MAGIC_KEY_NKRO N
  147. //#define MAGIC_KEY_SLEEP_LED Z
  148. /*
  149. * Feature disable options
  150. * These options are also useful to firmware size reduction.
  151. */
  152. /* disable debug print */
  153. //#define NO_DEBUG
  154. /* disable print */
  155. //#define NO_PRINT
  156. /* disable action features */
  157. //#define NO_ACTION_LAYER
  158. //#define NO_ACTION_TAPPING
  159. //#define NO_ACTION_ONESHOT
  160. //#define NO_ACTION_MACRO
  161. //#define NO_ACTION_FUNCTION
  162. /*
  163. * MIDI options
  164. */
  165. /* Prevent use of disabled MIDI features in the keymap */
  166. //#define MIDI_ENABLE_STRICT 1
  167. /* enable basic MIDI features:
  168. - MIDI notes can be sent when in Music mode is on
  169. */
  170. //#define MIDI_BASIC
  171. /* enable advanced MIDI features:
  172. - MIDI notes can be added to the keymap
  173. - Octave shift and transpose
  174. - Virtual sustain, portamento, and modulation wheel
  175. - etc.
  176. */
  177. //#define MIDI_ADVANCED
  178. /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
  179. //#define MIDI_TONE_KEYCODE_OCTAVES 1
  180. /*
  181. * HD44780 LCD Display Configuration
  182. */
  183. /*
  184. #define LCD_LINES 2 //< number of visible lines of the display
  185. #define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
  186. #define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
  187. #if LCD_IO_MODE
  188. #define LCD_PORT PORTB //< port for the LCD lines
  189. #define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
  190. #define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
  191. #define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
  192. #define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
  193. #define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
  194. #define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
  195. #define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
  196. #define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
  197. #define LCD_RS_PORT LCD_PORT //< port for RS line
  198. #define LCD_RS_PIN 3 //< pin for RS line
  199. #define LCD_RW_PORT LCD_PORT //< port for RW line
  200. #define LCD_RW_PIN 2 //< pin for RW line
  201. #define LCD_E_PORT LCD_PORT //< port for Enable line
  202. #define LCD_E_PIN 1 //< pin for Enable line
  203. #endif
  204. */
  205. /* Bootmagic Lite key configuration */
  206. //#define BOOTMAGIC_LITE_ROW 0
  207. //#define BOOTMAGIC_LITE_COLUMN 0