- /*
- * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef REV6_CONFIG_H
- #define REV6_CONFIG_H
-
- /* USB Device descriptor parameter */
- #define PRODUCT_ID 0xA4F9
- #define DEVICE_VER 0x0006
-
- #undef MATRIX_ROWS
- #undef MATRIX_COLS
- /* key matrix size */
- #define MATRIX_ROWS 8
- #define MATRIX_COLS 6
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- /* Note: These are not used for arm boards. They're here purely as documentation. */
- #undef MATRIX_ROW_PINS
- #undef MATRIX_COL_PINS
-
- #define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
- #define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
-
- #define UNUSED_PINS
-
- #define ENCODERS_PAD_A { B12 }
- #define ENCODERS_PAD_B { B13 }
-
- #define DIP_SWITCH_PINS { B14, A15, A0, B9 }
-
- #define MUSIC_MAP
- #undef AUDIO_VOICES
- #undef AUDIO_PIN
- #define AUDIO_PIN A5
- #define AUDIO_PIN_ALT A4
- #define AUDIO_PIN_ALT_AS_NEGATIVE
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- // #define DEBOUNCE 6
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- //#define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- //#define LOCKING_RESYNC_ENABLE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
- /*
- * MIDI options
- */
-
- /* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
- */
- //#define MIDI_BASIC
-
- /* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
- */
- //#define MIDI_ADVANCED
-
- /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
- //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-
- /*
- * WS2812 Underglow Matrix options
- */
- #define RGB_DI_PIN A1
- #define RGBLED_NUM 9
- #define DRIVER_LED_TOTAL RGBLED_NUM
-
- #define WS2812_PWM_DRIVER PWMD2
- #define WS2812_PWM_CHANNEL 2
- #define WS2812_PWM_PAL_MODE 1
- #define WS2812_DMA_STREAM STM32_DMA1_STREAM2
- #define WS2812_DMA_CHANNEL 2
-
- #ifndef RGB_DISABLE_WHEN_USB_SUSPENDED
- # define RGB_DISABLE_WHEN_USB_SUSPENDED
- #endif
-
- #endif
|