You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

85 lines
2.6 KiB

  1. /*
  2. Copyright 2021 0xCB - Conor Burns
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #pragma once
  15. #include "config_common.h"
  16. // clang-format off
  17. /* USB Device descriptor parameter */
  18. #define VENDOR_ID 0xCB00
  19. #define PRODUCT_ID 0x1337
  20. #define DEVICE_VER 0x0001
  21. #define MANUFACTURER 0xCB
  22. #define PRODUCT 1337
  23. /* key matrix size */
  24. #define MATRIX_ROWS 3
  25. #define MATRIX_COLS 3
  26. /* Keyboard Matrix Assignments */
  27. #define DIRECT_PINS { \
  28. { D2, D4, F4 }, \
  29. { D7, B1, B3 }, \
  30. { E6, B4, B2 } \
  31. }
  32. #define TAP_CODE_DELAY 10
  33. #define ENCODER_DIRECTION_FLIP
  34. #define ENCODER_RESOLUTION 4
  35. #define ENCODERS_PAD_A { F5 }
  36. #define ENCODERS_PAD_B { F6 }
  37. #define BACKLIGHT_PIN B5
  38. #define BACKLIGHT_BREATHING
  39. #define BACKLIGHT_LEVELS 7
  40. #define RGB_DI_PIN D3
  41. #ifdef RGB_DI_PIN
  42. #define RGBLED_NUM 4
  43. #define RGBLIGHT_HUE_STEP 8
  44. #define RGBLIGHT_SAT_STEP 8
  45. #define RGBLIGHT_VAL_STEP 8
  46. #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
  47. #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
  48. #define RGBLIGHT_ANIMATIONS /* comment this and uncomment the lines below to save space */
  49. // #define RGBLIGHT_EFFECT_BREATHING
  50. // #define RGBLIGHT_EFFECT_SNAKE
  51. // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
  52. // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
  53. // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
  54. /* default setup after eeprom reset */
  55. #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_EFFECT_BREATHING + 2
  56. #define RGBLIGHT_DEFAULT_HUE 152
  57. #define RGBLIGHT_DEFAULT_SAT 232
  58. #define RGBLIGHT_DEFAULT_VAR 255
  59. #define RGBLIGHT_DEFAULT_SPD 2
  60. #endif
  61. // clang-format on
  62. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  63. #define DEBOUNCE 5
  64. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  65. #define LOCKING_SUPPORT_ENABLE
  66. /* Locking resynchronize hack */
  67. #define LOCKING_RESYNC_ENABLE
  68. /* Oled Size */
  69. #define OLED_DISPLAY_128X64
  70. #define OLED_FONT_END 255
  71. #define OLED_FONT_H "gfxfont.c"
  72. /* QMK DFU */
  73. #define QMK_LED B0