- #include QMK_KEYBOARD_H
- #include "hvp.c"
-
- #ifdef RGBLIGHT_ENABLE
- //Following line allows macro to read current RGB settings
- extern rgblight_config_t rgblight_config;
- #endif
-
- extern uint8_t is_master;
-
- // Each layer gets a name for readability, which is then used in the keymap matrix below.
- // The underscores don't mean anything - you can have a layer called STUFF or any other name.
- // Layer names don't all need to be of the same length, obviously, and you can also skip them
- // entirely and just use numbers.
- #define _QWERTY 0
- #define _LOWER 1
- #define _RAISE 2
- #define _ADJUST 3
-
- enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- LOWER,
- RAISE,
- ADJUST
- };
-
- const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QWERTY] = LAYOUT(
- //,-----------------------------------------. ,-----------------------------------------.
- LT(_ADJUST,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- LSFT_T(KC_ESC), KC_A, KC_S, KC_D, LT(3,KC_F), KC_G, KC_H, KC_J, KC_K, KC_L,TD(TD1),TD(TD2),
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,
- //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- KC_LGUI, LT(1,KC_SPC),MT(MOD_LSFT, KC_SPC), MT(MOD_LSFT,KC_ENT), LT(2,KC_SPC),KC_LALT
- //`--------------------' `--------------------'
- ),
-
- [_RAISE] = LAYOUT(
- //,-----------------------------------------. ,-----------------------------------------.
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_DEL, _______, _______, _______, _______, _______, _______,KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_LCTL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
- //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _______, _______, _______, _______, _______, _______
- //`--------------------' `--------------------'
- ),
-
- [_LOWER] = LAYOUT(
- //,-----------------------------------------. ,-----------------------------------------.
- KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_DEL, _______, _______, _______, _______, _______, _______,KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_LCTL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD,
- //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _______, _______, _______, _______, _______, _______
- //`--------------------' `--------------------'
- ),
-
- [_ADJUST] = LAYOUT(
- //,-----------------------------------------. ,-----------------------------------------.
- _______,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- KC_F1,_______,_______,D_NAVI,_______,_______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______,
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- RESET,KC_PSCR,_______,_______,_______,_______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
- //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _______, KC_VOLD,KC_MPLY, KC_MNXT, KC_VOLU,_______
- //`--------------------' `--------------------'
- )
- };
-
- int RGB_current_mode;
-
- // Setting ADJUST layer RGB back to default
- void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
- if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
- layer_on(layer3);
- } else {
- layer_off(layer3);
- }
- }
-
- void matrix_init_user(void) {
- #ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
- #endif
- //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
- iota_gfx_init(!has_usb()); // turns on the display
- #endif
- }
-
- //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
-
- // When add source files to SRC in rules.mk, you can use functions.
- const char *read_layer_state(void);
- const char *read_logo(void);
- void set_keylog(uint16_t keycode, keyrecord_t *record);
- const char *read_keylog(void);
- const char *read_keylogs(void);
-
- // const char *read_mode_icon(bool swap);
- // const char *read_host_led_state(void);
- // void set_timelog(void);
- // const char *read_timelog(void);
-
- void matrix_scan_user(void) {
- iota_gfx_task();
- }
-
- void matrix_render_user(struct CharacterMatrix *matrix) {
- if (is_master) {
- // If you want to change the display of OLED, you need to change here
- matrix_write_ln(matrix, read_layer_state());
- matrix_write_ln(matrix, read_keylog());
- //matrix_write_ln(matrix, read_keylogs());
- //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
- //matrix_write_ln(matrix, read_host_led_state());
- //matrix_write_ln(matrix, read_timelog());
- } else {
- matrix_write(matrix, read_logo());
- }
- }
-
- void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
- }
-
- void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
- matrix_clear(&matrix);
- matrix_render_user(&matrix);
- matrix_update(&display, &matrix);
- }
- #endif//SSD1306OLED
-
- bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
- #ifdef SSD1306OLED
- set_keylog(keycode, record);
- #endif
- // set_timelog();
- }
-
- switch (keycode) {
- case LOWER:
- if (record->event.pressed) {
- layer_on(_LOWER);
- update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_LOWER);
- update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- case RAISE:
- if (record->event.pressed) {
- layer_on(_RAISE);
- update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_RAISE);
- update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- case ADJUST:
- if (record->event.pressed) {
- layer_on(_ADJUST);
- } else {
- layer_off(_ADJUST);
- }
- return false;
- break;
- }
- return true;
- }
|