- /*
- * Copyright 2017 skully <skullydazed@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xC1ED
- #define PRODUCT_ID 0x2350
- #define DEVICE_VER 0x0001
- #define MANUFACTURER Clueboard
- #define PRODUCT Clueboard 60%
- #define DESCRIPTION Clueboard 60%
-
- /* Address for jumping to bootloader on STM32 chips. */
- /* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- */
- #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
-
- /* key matrix size */
- #define MATRIX_ROWS 5
- #define MATRIX_COLS 15
-
- /*
- * Keyboard Matrix Assignments
- *
- * COLS: Pins used for columns, left to right
- * ROWS: Pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 }
- #define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C15, C14, C13, B5, B6 }
- #define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 }
- #define DIODE_DIRECTION COL2ROW
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 6
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- //#define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- //#define LOCKING_RESYNC_ENABLE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
- /*
- * MIDI options
- */
-
- /* Prevent use of disabled MIDI features in the keymap */
- //#define MIDI_ENABLE_STRICT 1
-
- /* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
- */
- //#define MIDI_BASIC
-
- /* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
- */
- //#define MIDI_ADVANCED
-
- /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
- //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
- /* Backlight configuration
- */
- #define BACKLIGHT_LEVELS 1
|