You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

143 lines
4.1 KiB

  1. /*
  2. Copyright 2018 Yiancar
  3. This program is free software: you can redistribute it and/or modify
  4. it under the terms of the GNU General Public License as published by
  5. the Free Software Foundation, either version 2 of the License, or
  6. (at your option) any later version.
  7. This program is distributed in the hope that it will be useful,
  8. but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. GNU General Public License for more details.
  11. You should have received a copy of the GNU General Public License
  12. along with this program. If not, see <http://www.gnu.org/licenses/>.
  13. */
  14. #pragma once
  15. #include "config_common.h"
  16. /* USB Device descriptor parameter */
  17. #define VENDOR_ID 0xFEED
  18. #define PRODUCT_ID 0x1010
  19. #define DEVICE_VER 0x0001
  20. #define MANUFACTURER Mechboards
  21. #define PRODUCT DC01 Left
  22. /* key matrix size */
  23. #define MATRIX_ROWS 5
  24. #define MATRIX_COLS 21
  25. #define MATRIX_COLS_SCANNED 6
  26. /*
  27. * Keyboard Matrix Assignments
  28. *
  29. * Change this to how you wired your keyboard
  30. * COLS: AVR pins used for columns, left to right
  31. * ROWS: AVR pins used for rows, top to bottom
  32. * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  33. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  34. *
  35. */
  36. #define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 }
  37. #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
  38. #define UNUSED_PINS
  39. #define F_SCL 300000UL
  40. /* COL2ROW, ROW2COL*/
  41. #define DIODE_DIRECTION COL2ROW
  42. // #define BACKLIGHT_PIN B7
  43. // #define BACKLIGHT_BREATHING
  44. // #define BACKLIGHT_LEVELS 3
  45. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
  46. #define DEBOUNCE 5
  47. /* define if matrix has ghost (lacks anti-ghosting diodes) */
  48. //#define MATRIX_HAS_GHOST
  49. /* number of backlight levels */
  50. /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
  51. #define LOCKING_SUPPORT_ENABLE
  52. /* Locking resynchronize hack */
  53. #define LOCKING_RESYNC_ENABLE
  54. /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  55. * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
  56. */
  57. // #define GRAVE_ESC_CTRL_OVERRIDE
  58. /*
  59. * Force NKRO
  60. *
  61. * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
  62. * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
  63. * makefile for this to work.)
  64. *
  65. * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
  66. * until the next keyboard reset.
  67. *
  68. * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
  69. * fully operational during normal computer usage.
  70. *
  71. * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
  72. * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
  73. * bootmagic, NKRO mode will always be enabled until it is toggled again during a
  74. * power-up.
  75. *
  76. */
  77. //#define FORCE_NKRO
  78. /*
  79. * Magic Key Options
  80. *
  81. * Magic keys are hotkey commands that allow control over firmware functions of
  82. * the keyboard. They are best used in combination with the HID Listen program,
  83. * found here: https://www.pjrc.com/teensy/hid_listen.html
  84. *
  85. * The options below allow the magic key functionality to be changed. This is
  86. * useful if your keyboard/keypad is missing keys and you want magic key support.
  87. *
  88. */
  89. /*
  90. * Feature disable options
  91. * These options are also useful to firmware size reduction.
  92. */
  93. /* disable debug print */
  94. //#define NO_DEBUG
  95. /* disable print */
  96. //#define NO_PRINT
  97. /* disable action features */
  98. //#define NO_ACTION_LAYER
  99. //#define NO_ACTION_TAPPING
  100. //#define NO_ACTION_ONESHOT
  101. //#define NO_ACTION_MACRO
  102. //#define NO_ACTION_FUNCTION
  103. /*
  104. * MIDI options
  105. */
  106. /* enable basic MIDI features:
  107. - MIDI notes can be sent when in Music mode is on
  108. */
  109. //#define MIDI_BASIC
  110. /* enable advanced MIDI features:
  111. - MIDI notes can be added to the keymap
  112. - Octave shift and transpose
  113. - Virtual sustain, portamento, and modulation wheel
  114. - etc.
  115. */
  116. //#define MIDI_ADVANCED
  117. /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
  118. //#define MIDI_TONE_KEYCODE_OCTAVES 1