- /*
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xCDCD
- #define PRODUCT_ID 0x5337
- #define DEVICE_VER 0x0001
- #define MANUFACTURER shensmobile
- #define PRODUCT Boardwalk
-
- /* key matrix size */
- #define MATRIX_ROWS 5
- #define MATRIX_COLS 14
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 }
- #define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
- #define UNUSED_PINS
-
- /* COL2ROW, ROW2COL */
- #define DIODE_DIRECTION COL2ROW
-
- // #define BACKLIGHT_PIN F5
- // #define BACKLIGHT_LEVELS 6
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
- // ws2812 options
- #define RGB_DI_PIN B7 // pin the DI on the ws2812 is hooked-up to
- #define RGBLIGHT_ANIMATIONS // run RGB animations
- #define RGBLED_NUM 14 // number of LEDs
- #define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
- #define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
- #define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
|