- # Hub16
-
- Hub16 is a 16 Key Macro Pad with an inbuilt USB 2.0 hub and dual rotary encoders.
-
- For more information regarding the keyboard, please visit the [Hub16 Website](https://www.joshajohnson.com/hub16-keyboard/) or [GitHub Repo](https://github.com/joshajohnson/Hub16).
-
- * Keyboard Maintainer: [Josh Johnson](https://github.com/joshajohnson)
- * Hardware Supported: Hub16 PCB (atmega32u4)
- * Hardware Availability: [Josh Johnson](https://www.joshajohnson.com/hub16-keyboard/)
-
- Make example for this keyboard (after setting up your build environment):
-
- make hub16:default
-
- Flashing example for this keyboard:
-
- make hub16:default:flash
-
- To reset the board into bootloader mode, do one of the following:
-
- * Press the reset switch between the center two USB-C ports while the board is plugged in
- * Hold the top left key while connecting the USB cable (also erases persistent settings)
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|