- # kc60se
-
- * Keyboard Maintainer: [Blake C. Lewis](https://github.com/BlakeCLewis), [MechMerlin](https://www.github.com/mechmerlin)
- * Hardware Supported: KC60SE
- * Hardware Availability: PCB is no longer available
-
- ## Description:
- * 60% keyboard PCB;
- * supports ANSI, ISO, and HHKB layouts.
-
-
- ### Enter the Bootloader
- * As delivered, BOOTMAGIC_ENABLE = yes:
- * unplug keyboard;
- * while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds;
- * 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060';
- * in bootloader LEDs are off & keyboard does not work.
- * New firmware, BOOTMAGIC_ENABLE = lite:
- * holding down esc while pluging in usb.
- * Hardware way:
- * momentary jump pads 5 & 6 to enter bootloader;
-
- ### Compile the default keymap:
- make kc60se:default
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
- ### NKRO
- * N or 6 Key Rollover NKRO/6KRO
- * navigating bios of computer may require 6KRO
- * default keymap has fn(T) mapped to toggle NKRO/6KRO
- * test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO
-
- ### DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row:
- * K41/K4C are WIN/GUI and will disrupt games;
- * Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches;
-
- ```
- dip keys
- #1 #2 K41 K4C
- 1 1 1 1 both keys enabled
- 1 0 0 1
- 0 1 1 0
- 0 0 0 0 both keys disabled
- ```
- ### ISP header next to the ATmega32U4:
- * if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6
-
- ```
- 2 4 6
- : : :
- 1 3 5
- ```
- ```
- 1 - B3 MISO, column 13, square pad
- 2 - VCC
- 3 - B1 SCLK, column 7
- 4 - B2 MOSI, caplock led
- 5 - Reset | momentary jump 5 and 6
- 6 - Ground | to enter Bootloader
- ```
|