- # After making changes to code or tables call org-babel-tangle (C-c C-v t).
-
- * Miryoku QMK [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/miryoku-roa-32.png]]
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/cover/miryoku-kle-cover.png]]
-
- [[https://github.com/manna-harbour/miryoku/][Miryoku]] is an ergonomic, minimal, orthogonal, and universal keyboard layout. This is the Miryoku implementation for [[https://qmk.fm][QMK]].
-
- ** Branches
-
-
- *** QMK master
-
- Miryoku QMK is periodically merged upstream into QMK master and it is generally recommended to build directly from QMK master.
-
- QMK master is at https://github.com/qmk/qmk_firmware/tree/master, and the corresponding Miryoku QMK readme is at https://github.com/qmk/qmk_firmware/tree/master/users/manna-harbour_miryoku.
-
-
- *** Miryoku QMK development branch
-
- The Miryoku QMK development branch is ~miryoku~ and may contain new commits not yet merged into QMK master.
-
- ~miryoku~ is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku, and the corresponding Miryoku QMK readme is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku/users/manna-harbour_miryoku.
-
- New commits can be seen at the top of the [[https://github.com/manna-harbour/miryoku_qmk/commits/miryoku][history]] with commit messages beginning ~[miryoku]~. After the new commits are squashed and merged upstream into QMK master by pull request the ~miryoku~ branch is renamed and a new ~miryoku~ branch is created from QMK master.
-
- To checkout the ~miryoku~ branch in your existing QMK build environment:
- #+BEGIN_SRC sh :tangle no
- git remote add miryoku_qmk git@github.com:manna-harbour/miryoku_qmk.git # if using SSH
- git remote add miryoku_qmk https://github.com/manna-harbour/miryoku_qmk.git # if using HTTPS
- git fetch miryoku_qmk
- git checkout --track miryoku_qmk/miryoku
- #+END_SRC
-
-
- ** Layout
-
- *** General Principles
-
- - Use layers instead of reaching.
- - Use both hands instead of contortions.
- - Use the home positions as much as possible.
- - Make full use of the thumbs.
- - Avoid unnecessary complication.
-
-
- *** Details
-
- - 5 columns, 3 rows, 3 thumb keys, 2 hands.
- - Can be used on almost any split or non-split ergo or ortho keyboard.
- - Includes all keys found on a US layout TKL keyboard, plus media keys and mouse
- emulation.
- - Home row is the middle row, home thumb key is the middle thumb key.
- - Maximum 1-u movement from home position for fingers and thumbs, and only along
- one axis (except for the inner index finger column which is deprioritised
- compared with the home columns).
- - Dual-function modifiers on home row, mirrored on both hands.
- - Dual-function layer change on thumbs.
- - Layers are designed orthogonally with a single purpose per hand and are
- accessed by holding a thumb key on the opposite hand.
- - All layers on the same hand are based on the same basic key arrangement.
- - Holding layer change and modifiers on one hand combined with a single key
- press on the other hand can produce any combination of modifiers and single
- keys without any finger contortions.
- - Single function mods are also defined on layers on the same hand as the layer
- change thumb key so layer change and mods can be held in any order or
- simultaneously without race conditions.
- - As mods are only enabled on the opposite hand, auto-repeat is available on the
- home row on layers for use with cursor and mouse keys.
- - Tap-hold auto-repeat is disabled to permit faster tap-hold switching on
- thumbs, but thumb tap keys are mirrored onto some layers for use with
- auto-repeat. On other layers thumb keys are redefined with important
- functions for that layer.
- - Auto Shift for numbers and symbols.
-
-
- *** Layers
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference.png]]
-
- The layers are maintained in tables. ~U_NP~ indicates the key is not present
- and is used to fill in the table around the thumb keys. The grid arrangement of
- the tables does not imply a particular physical layout.
-
- Basic keycodes are entered without the ~KC_~ prefix. Symbols can be entered
- as-is, except for '-' (~MINS~), '.' (~DOT~), '|' (~PIPE~), and '"' (~DQUO~).
- Empty cells are unused.
-
- The base layer is maintained as separate tables for tap alphas, tap thumbs, and
- hold. Other layers are specified as a single hand including thumbs. Tables are
- combined to produce the keymap for each layer.
-
- Mods (and reset) will be available on sub layers on the same hand as the layer
- change thumb key. Unknown names are considered to be layer names.
-
-
- **** Base
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-base.png]]
-
- The base layer alphas are Colemak Mod-DH. Dot, comma, slash, and apostrophe are
- included with the alphas. The primary, secondary, and tertiary thumb keys are
- backspace, enter, delete on the right and space, tab, escape on the left.
-
- Alternative alpha arrangements are also available.
-
-
- ***** Tap
-
-
- ****** Alphas
-
- #+NAME: colemakdh
- | Q | W | F | P | B | J | L | U | Y | ' |
- | A | R | S | T | G | M | N | E | I | O |
- | Z | X | C | D | V | K | H | , | DOT | / |
-
-
- ****** Thumbs
-
- #+NAME: thumbs
- | U_NP | U_NP | ESC | SPC | TAB | ENT | BSPC | DEL | U_NP | U_NP |
-
-
- ***** Hold
-
- #+NAME: hold
- | RESET | | | | | | | | | RESET |
- | LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI |
- | BUTTON | ALGR | | | | | | | ALGR | BUTTON |
- | U_NP | U_NP | MEDIA | NAV | MOUSE | SYM | NUM | FUN | U_NP | U_NP |
-
-
- **** Nav
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-nav.png]]
-
- Primary right-hand layer (left home thumb) is navigation and editing. Cursor
- keys are on the home position, line and page movement below, clipboard above,
- caps lock and insert on the inner column. Thumb keys are duplicated from the
- base layer to avoid having to layer change mid edit and to enable auto-repeat.
-
- Alternative clipboard key mappings and navigation key arrangements are
- available.
-
- #+NAME: nav-r
- | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | CAPS | LEFT | DOWN | UP | RGHT |
- | INS | HOME | PGDN | PGUP | END |
- | ENT | BSPC | DEL | U_NP | U_NP |
-
-
- **** Mouse
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-mouse.png]]
-
- Secondary right-hand layer is mouse emulation. Mouse movement mirrors cursor
- navigation on home and wheel mirrors line / page movement below. Buttons are on
- the thumbs (L, M, R). Mouse movement, click, and drag, with modifiers, can be
- performed from the home position. Clipboard keys are duplicated from the Nav
- layer.
-
- #+NAME: mouse-r
- | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | | MS_L | MS_D | MS_U | MS_R |
- | | WH_L | WH_D | WH_U | WH_R |
- | BTN1 | BTN3 | BTN2 | U_NP | U_NP |
-
-
- **** Button
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-button.png]]
-
- Provides mouse buttons, mods, and clipboard keys for use with integrated or
- external pointing devices, used with either hand. The layer is available for
- automatic activation depending on hardware and configuration. It can also be
- activated manually by holding a bottom row pinkie key (however GUI and Undo will
- be unavailable).
-
- #+NAME: button
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI |
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | U_NP | U_NP | BTN2 | BTN3 | BTN1 | BTN1 | BTN3 | BTN2 | U_NP | U_NP |
-
-
- **** Media
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-media.png]]
-
- Tertiary right-hand layer is media control, with volume up / down and next /
- prev mirroring the navigation keys. Pause, stop and mute are on thumbs. RGB
- control is on the top row (combine with shift to invert). Unused keys are
- available for other related functions.
-
- #+NAME: media-r
- | RGB_TOG | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI |
- | | MPRV | VOLD | VOLU | MNXT |
- | | | | | |
- | MSTP | MPLY | MUTE | U_NP | U_NP |
-
-
- **** Num
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-num.png]]
-
- Primary left-hand layer (right home thumb) is numerals and symbols. Numerals
- are in the standard numpad locations with symbols in the remaining positions.
- Dot is duplicated from the base layer.
-
- #+NAME: num-l
- | [ | 7 | 8 | 9 | ] |
- | ; | 4 | 5 | 6 | = |
- | ` | 1 | 2 | 3 | \ |
- | U_NP | U_NP | DOT | 0 | MINS |
-
-
- **** Sym
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-sym.png]]
-
- Secondary left-hand layer has shifted symbols in the same locations to reduce
- chording when using mods with shifted symbols. Open parenthesis is duplicated
- next to close parenthesis.
-
- #+NAME: sym-l
- | { | & | * | ( | } |
- | : | $ | % | ^ | + |
- | ~ | ! | @ | # | PIPE |
- | U_NP | U_NP | ( | ) | _ |
-
-
- **** Fun
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-fun.png]]
-
- Tertiary left-hand layer has function keys mirroring the numerals on the primary
- layer with extras on the pinkie column, plus system keys on the inner column.
- App (menu) is on the tertiary thumb key and other thumb keys are duplicated from
- the base layer to enable auto-repeat.
-
-
- #+NAME: fun-l
- | F12 | F7 | F8 | F9 | PSCR |
- | F11 | F4 | F5 | F6 | SLCK |
- | F10 | F1 | F2 | F3 | PAUS |
- | U_NP | U_NP | APP | SPC | TAB |
-
-
- **** Alternative Layouts
-
- The defaults are recommended, but alternative layouts are provided to
- accommodate existing muscle memory and platform differences.
-
-
- ***** Alphas
-
- To select, append the corresponding option to the ~make~ command line when
- building, e.g. ~MIRYOKU_ALPHAS=QWERTY~.
-
-
- ****** AZERTY
-
- ~MIRYOKU_ALPHAS=AZERTY~
-
- #+NAME: azerty
- | A | Z | E | R | T | Y | U | I | O | P |
- | Q | S | D | F | G | H | J | K | L | M |
- | W | X | C | V | B | N | , | DOT | / | ' |
-
-
- ****** Colemak
-
- ~MIRYOKU_ALPHAS=COLEMAK~
-
- #+NAME: colemak
- | Q | W | F | P | G | J | L | U | Y | ' |
- | A | R | S | T | D | H | N | E | I | O |
- | Z | X | C | V | B | K | M | , | DOT | / |
-
-
- ****** Colemak Mod-DHk
-
- ~MIRYOKU_ALPHAS=COLEMAKDHK~
-
- #+NAME: colemakdhk
- | Q | W | F | P | B | J | L | U | Y | ' |
- | A | R | S | T | G | K | N | E | I | O |
- | Z | X | C | D | V | M | H | , | DOT | / |
-
-
- ****** Dvorak
-
- ~MIRYOKU_ALPHAS=DVORAK~
-
- #+NAME: dvorak
- | ' | , | DOT | P | Y | F | G | C | R | L |
- | A | O | E | U | I | D | H | T | N | S |
- | / | Q | J | K | X | B | M | W | V | Z |
-
-
- ****** Halmak
-
- ~MIRYOKU_ALPHAS=HALMAK~
-
- #+NAME: halmak
- | W | L | R | B | Z | ' | Q | U | D | J |
- | S | H | N | T | , | DOT | A | E | O | I |
- | F | M | V | C | / | G | P | X | K | Y |
-
-
- ****** Workman
-
- ~MIRYOKU_ALPHAS=WORKMAN~
-
- #+NAME: workman
- | Q | D | R | W | B | J | F | U | P | ' |
- | A | S | H | T | G | Y | N | E | O | I |
- | Z | X | M | C | V | K | L | , | DOT | / |
-
-
- ****** QWERTY
-
- ~MIRYOKU_ALPHAS=QWERTY~
-
- #+NAME: qwerty
- | Q | W | E | R | T | Y | U | I | O | P |
- | A | S | D | F | G | H | J | K | L | ' |
- | Z | X | C | V | B | N | M | , | DOT | / |
-
-
- ****** QWERTZ
-
- ~MIRYOKU_ALPHAS=QWERTZ~
-
- #+NAME: qwertz
- | Q | W | E | R | T | Z | U | I | O | P |
- | A | S | D | F | G | H | J | K | L | ' |
- | Y | X | C | V | B | N | M | , | DOT | / |
-
-
- ***** Nav
-
-
- ****** vi-Style
-
- To select, append ~MIRYOKU_NAV=VI~ to the ~make~ command line when building.
- Not available with ~MIRYOKU_LAYERS=FLIP~.
-
-
- ******* Nav
-
- #+NAME: nav-r-vi
- | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | LEFT | DOWN | UP | RGHT | CAPS |
- | HOME | PGDN | PGUP | END | INS |
- | ENT | BSPC | DEL | U_NP | U_NP |
-
-
- ******* Mouse
-
- #+NAME: mouse-r-vi
- | U_RDO | U_PST | U_CPY | U_CUT | U_UND |
- | MS_L | MS_D | MS_U | MS_R | |
- | WH_L | WH_D | WH_U | WH_R | |
- | BTN1 | BTN3 | BTN2 | U_NP | U_NP |
-
-
- ******* Media
-
- #+NAME: media-r-vi
- | RGB_TOG | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI |
- | MPRV | VOLD | VOLU | MNXT | |
- | | | | | |
- | MSTP | MPLY | MUTE | U_NP | U_NP |
-
-
- ****** Inverted-T
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference-flip-invertedt.png]]
-
- To select, append ~MIRYOKU_NAV=INVERTEDT~ to the ~make~ command line when
- building. Only available with ~MIRYOKU_LAYERS=FLIP~.
-
-
- ******* Nav
-
- #+NAME: nav-l-invertedt
- | PGUP | HOME | UP | END | INS |
- | PGDN | LEFT | DOWN | RGHT | CAPS |
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO |
- | U_NP | U_NP | DEL | BSPC | ENT |
-
-
- ******* Mouse
-
- #+NAME: mouse-l-invertedt
- | WH_U | WH_L | MS_U | WH_R | |
- | WH_D | MS_L | MS_D | MS_R | |
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO |
- | U_NP | U_NP | BTN2 | BTN3 | BTN1 |
-
-
- ******* Media
-
- #+NAME: media-l-invertedt
- | | | VOLU | | |
- | | MPRV | VOLD | MNXT | |
- | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI | RGB_TOG |
- | U_NP | U_NP | MUTE | MPLY | MSTP |
-
-
- ***** Clipboard
-
- Keycodes are translated according to the following tables.
-
- By default, the main clipboard keys (cut, copy, and paste) use the CUA bindings
- and should work in general unix and windows applications, emacs, and terminal
- emulators. The additional keys (undo, redo) usually require rebinding in the
- application.
-
- To select, append the corresponding option to the ~make~ command line when
- building, e.g. ~MIRYOKU_CLIPBOARD=WIN~.
-
-
- ****** Default
-
- #+NAME: clipboard
- | U_RDO | AGIN |
- | U_PST | S(KC_INS) |
- | U_CPY | C(KC_INS) |
- | U_CUT | S(KC_DEL) |
- | U_UND | UNDO |
-
-
- ****** Fun Cluster
-
- ~MIRYOKU_CLIPBOARD=FUN~
-
- #+NAME: clipboard-fun
- | U_RDO | AGIN |
- | U_PST | PSTE |
- | U_CPY | COPY |
- | U_CUT | CUT |
- | U_UND | UNDO |
-
-
- ****** Mac
-
- ~MIRYOKU_CLIPBOARD=MAC~
-
- #+NAME: clipboard-mac
- | U_RDO | SCMD(KC_Z) |
- | U_PST | LCMD(KC_V) |
- | U_CPY | LCMD(KC_C) |
- | U_CUT | LCMD(KC_X) |
- | U_UND | LCMD(KC_Z) |
-
-
- ****** Windows
-
- ~MIRYOKU_CLIPBOARD=WIN~
-
- #+NAME: clipboard-win
- | U_RDO | C(KC_Y) |
- | U_PST | C(KC_V) |
- | U_CPY | C(KC_C) |
- | U_CUT | C(KC_X) |
- | U_UND | C(KC_Z) |
-
-
- ***** Layers
-
-
- ****** Flip
-
- Flip base layer thumb keys and sub layers between right and left hands.
-
- To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building.
-
-
- ******* Thumbs
-
- #+NAME: thumbs-flip
- | U_NP | U_NP | DEL | BSPC | ENT | TAB | SPC | ESC | U_NP | U_NP |
-
-
- ******* Hold
-
- #+NAME: hold-flip
- | RESET | | | | | | | | | RESET |
- | LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI |
- | BUTTON | ALGR | | | | | | | ALGR | BUTTON |
- | U_NP | U_NP | FUN | NUM | SYM | MOUSE | NAV | MEDIA | U_NP | U_NP |
-
-
- ******* Nav
-
- #+NAME: nav-l
- | HOME | PGDN | PGUP | END | INS |
- | LEFT | DOWN | UP | RGHT | CAPS |
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO |
- | U_NP | U_NP | DEL | BSPC | ENT |
-
-
- ******* Mouse
-
- #+NAME: mouse-l
- | WH_L | WH_D | WH_U | WH_R | |
- | MS_L | MS_D | MS_U | MS_R | |
- | U_UND | U_CUT | U_CPY | U_PST | U_RDO |
- | U_NP | U_NP | BTN2 | BTN3 | BTN1 |
-
-
- ******* Media
-
- #+NAME: media-l
- | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI | RGB_TOG |
- | MPRV | VOLD | VOLU | MNXT | |
- | | | | | |
- | U_NP | U_NP | MUTE | MPLY | MSTP |
-
-
- ******* Num
-
- #+NAME: num-r
- | [ | 7 | 8 | 9 | ] |
- | = | 4 | 5 | 6 | ; |
- | \ | 1 | 2 | 3 | ` |
- | MINS | 0 | DOT | U_NP | U_NP |
-
-
- ******* Sym
-
- #+NAME: sym-r
- | { | & | * | ( | } |
- | + | $ | % | ^ | : |
- | PIPE | ! | @ | # | ~ |
- | _ | ( | ) | U_NP | U_NP |
-
-
- ******* Fun
-
- #+NAME: fun-r
- | PSCR | F7 | F8 | F9 | F12 |
- | SLCK | F4 | F5 | F6 | F11 |
- | PAUS | F1 | F2 | F3 | F10 |
- | TAB | SPC | APP | U_NP | U_NP |
-
-
- **** COMMENT Templates
-
- #+NAME: tem
- | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> |
- |------+------+------+------+------+------+------+------+------+------|
- | | | | | | | | | | |
- | | | | | | | | | | |
- | | | | | | | | | | |
- | U_NP | U_NP | | | | | | | U_NP | U_NP |
-
-
- Duplicate base layer tap keys on thumbs rather than trans to enable auto-repeat.
-
- #+NAME: tem-r
- | <l4> | <l4> | <l4> | <l4> | <l4> |
- |------+------+------+------+------|
- | | | | | |
- | | | | | |
- | | | | | |
- | ENT | BSPC | DEL | U_NP | U_NP |
-
- #+NAME: tem-l
- | <l4> | <l4> | <l4> | <l4> | <l4> |
- |------+------+------+------+------|
- | | | | | |
- | | | | | |
- | | | | | |
- | U_NP | U_NP | ESC | SPC | TAB |
-
-
- ** Code Generation
-
- The layout is maintained in emacs org-mode tables and converted to QMK keymap
- data structures using embedded python scripts.
-
-
- *** Table Conversion Scripts
-
-
- **** table-layout-taphold
-
- Produce base layer from separate tap and hold tables.
-
- #+NAME: table-layout-taphold
- #+BEGIN_SRC python :var alphas_table=colemakdh :var thumbs_table=thumbs :var hold_table=hold :var symbol_names_table=symbol-names :var mods_table=mods :var nonkc_table=nonkc :tangle no :results verbatim
- width = 19
- mods_dict = dict.fromkeys(mods_table[0])
- nonkc_tuple = tuple(nonkc_table[0])
- symbol_names_dict = {}
- for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
- symbol_names_dict[symbol] = name
- symbol_names_dict[shifted_symbol] = shifted_name
- results = ''
- for tap_row, hold_row in zip(alphas_table + thumbs_table, hold_table):
- results += ' '
- for tap, hold in zip(tap_row, hold_row):
- if tap == '':
- code = 'U_NU'
- elif tap in symbol_names_dict:
- code = symbol_names_dict[tap]
- else:
- code = tap
- if not str(code).startswith(nonkc_tuple):
- code = 'KC_' + str(code)
- if hold in mods_dict:
- code = str(hold) + '_T(' + code + ')'
- elif hold != '' and hold != 'U_NP' and hold != 'RESET':
- code = 'LT(' + str(hold) + ', ' + code + ')'
- results += (code + ', ').ljust(width)
- results = results.rstrip(' ') + '\n'
- results = results.rstrip('\n, ')
- return results
- #+END_SRC
-
- #+RESULTS: table-layout-taphold
- : KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT,
- : LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O),
- : KC_Z, ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, ALGR_T(KC_DOT), KC_SLSH,
- : U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP
-
-
- **** table-layout-half
-
- Produce sub layers given layer name and corresponding table for single hand and
- incorporating mods and reset from base layer. Layer names must end with 'R' or
- 'L'. A layer with shifted symbols can also be generated.
-
- #+NAME: table-layout-half
- #+BEGIN_SRC python :var hold_table=hold :var mode="r" :var half_table=nav-r :var symbol_names_table=symbol-names :var mods_table=mods :var nonkc_table=nonkc :var shift="false" :tangle no :results verbatim
- width = 9
- mods_dict = dict.fromkeys(mods_table[0])
- nonkc_tuple = tuple(nonkc_table[0])
- symbol_names_dict = {}
- shifted_symbol_names_dict = {}
- for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
- symbol_names_dict[symbol] = name
- symbol_names_dict[shifted_symbol] = shifted_name
- shifted_symbol_names_dict[symbol] = shifted_name
- length = len(half_table[0])
- results = ''
- for half_row, hold_row in zip(half_table, hold_table):
- results += ' '
- hold_row_l, hold_row_r = hold_row[:length], hold_row[length:]
- for lr, hold_row_lr in ('l', hold_row_l), ('r', hold_row_r):
- if lr == mode:
- for half in half_row:
- if half == '':
- code = 'U_NU'
- elif shift == "true" and half in shifted_symbol_names_dict:
- code = shifted_symbol_names_dict[half]
- elif half in symbol_names_dict:
- code = symbol_names_dict[half]
- else:
- code = half
- if not str(code).startswith(nonkc_tuple):
- code = 'KC_' + str(code)
- results += (str(code) + ', ').ljust(width)
- else:
- for hold in hold_row_lr:
- if hold == '' or hold != 'U_NP' and hold != 'RESET' and hold not in mods_dict:
- code = 'U_NA'
- else:
- code = hold
- if not str(code).startswith(nonkc_tuple):
- code = 'KC_' + str(code)
- results += (str(code) + ', ').ljust(width)
- results = results.rstrip(' ') + '\n'
- results = results.rstrip('\n, ')
- return results
- #+END_SRC
-
- #+RESULTS: table-layout-half
- : RESET, U_NA, U_NA, U_NA, U_NA, U_RDO, U_PST, U_CPY, U_CUT, U_UND,
- : KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, U_NA, KC_CAPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT,
- : U_NA, KC_ALGR, U_NA, U_NA, U_NA, KC_INS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,
- : U_NP, U_NP, U_NA, U_NA, U_NA, KC_ENT, KC_BSPC, KC_DEL, U_NP, U_NP
-
-
- **** table-layout-full
-
- Produce full layer from single table. Fill for unused keys is configurable.
-
- #+NAME: table-layout-full
- #+BEGIN_SRC python :var table=button :var fill="TRNS" :var symbol_names_table=symbol-names :var nonkc_table=nonkc :tangle no :results verbatim
- width = 9
- symbol_names_dict = {}
- nonkc_tuple = tuple(nonkc_table[0])
- for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
- symbol_names_dict[symbol] = name
- symbol_names_dict[shifted_symbol] = shifted_name
- results = ''
- for row in table:
- results += ' '
- for key in row:
- if key == '':
- code = fill
- elif key in symbol_names_dict:
- code = symbol_names_dict[key]
- else:
- code = key
- if not str(code).startswith(nonkc_tuple):
- code = 'KC_' + str(code)
- results += (code + ', ').ljust(width)
- results = results.rstrip(' ') + '\n'
- results = results.rstrip('\n, ')
- return results
- #+END_SRC
-
- #+RESULTS: table-layout-full
- : U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND,
- : KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
- : U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND,
- : U_NP, U_NP, KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP, U_NP
-
-
- **** table-enums
-
- Produce layer enums from layer names in hold table.
-
- #+NAME: table-enums
- #+BEGIN_SRC python :var hold_table=hold :var mods_table=mods :tangle no
- mods_dict = dict.fromkeys(mods_table[0])
- layers = [ 'BASE', 'BUTTON' ]
- for hold_row in hold_table:
- for hold in hold_row:
- if hold not in mods_dict and hold != '' and hold != 'U_NP' and hold != 'RESET' and hold not in layers:
- layers.append(hold)
- results = 'enum layers { ' + ', '.join(layers) + ' };'
- return results
- #+END_SRC
-
- #+RESULTS: table-enums
- : enum layers { BASE, BUTTON, MEDIA, NAV, MOUSE, SYM, NUM, FUN };
-
-
- **** table-keycode-mappings
-
- Produce keycode mappings according to the provided table.
-
- #+NAME: table-keycode-mappings
- #+BEGIN_SRC python :var table=clipboard :var symbol_names_table=symbol-names :var nonkc_table=nonkc :tangle no
- nonkc_tuple = tuple(nonkc_table[0])
- symbol_names_dict = {}
- for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
- symbol_names_dict[symbol] = name
- symbol_names_dict[shifted_symbol] = shifted_name
- results = ''
- for f,t in table:
- if t == '':
- code = 'U_NU'
- elif t in symbol_names_dict:
- code = symbol_names_dict[t]
- else:
- code = t
- if not str(code).startswith(nonkc_tuple):
- code = 'KC_' + str(code)
- results += '#define ' + f + ' ' + code + '\n'
- return results
- #+END_SRC
-
- #+RESULTS: table-keycode-mappings
- : #define U_RDO KC_AGIN
- : #define U_PST S(KC_INS)
- : #define U_CPY C(KC_INS)
- : #define U_CUT S(KC_DEL)
- : #define U_UND KC_UNDO
-
-
- **** COMMENT python-version
-
- C-c C-c in code block to update
-
- #+NAME: python-version
- #+BEGIN_SRC python :tangle no
- import sys
- return sys.version
- #+END_SRC
-
- #+RESULTS: python-version
- : 3.9.4 (default, Apr 9 2021, 01:15:05)
- : [GCC 5.4.0 20160609]
-
-
- *** Data
-
-
- **** symbol-names
-
- Symbol, name, and shifted symbol mappings for use in tables.
-
- #+NAME: symbol-names
- | ` | GRV | ~ | TILD |
- | "-" | MINS | _ | UNDS |
- | = | EQL | + | PLUS |
- | [ | LBRC | { | LCBR |
- | ] | RBRC | } | RCBR |
- | \ | BSLS | PIPE | PIPE |
- | ; | SCLN | : | COLN |
- | ' | QUOT | DQUO | DQUO |
- | , | COMM | < | LT |
- | "." | DOT | > | GT |
- | / | SLSH | ? | QUES |
- | 1 | 1 | ! | EXLM |
- | 2 | 2 | @ | AT |
- | 3 | 3 | # | HASH |
- | 4 | 4 | $ | DLR |
- | 5 | 5 | % | PERC |
- | 6 | 6 | ^ | CIRC |
- | 7 | 7 | & | AMPR |
- | 8 | 8 | * | ASTR |
- | 9 | 9 | ( | LPRN |
- | 0 | 0 | ) | RPRN |
-
-
- **** mods
-
- Modifiers usable in hold table. Need to have the same name for ~KC_~ and ~_T~
- versions.
-
- #+NAME: mods
- | LSFT | LCTL | LALT | LGUI | ALGR |
-
-
- **** nonkc
-
- Keycodes that match any of these prefixes will not have ~KC_~ automatically
- prepended.
-
- #+NAME: nonkc
- | U_ | RGB_ | RESET | S( | C( | SCMD( | LCMD( |
-
-
- **** header
-
- Header for tangled files.
-
- #+NAME: header
- #+BEGIN_SRC C :main no :tangle no
- Copyright 2019 Manna Harbour
- https://github.com/manna-harbour/miryoku
- generated -*- buffer-read-only: t -*-
- #+END_SRC
-
-
- **** license-qmk
-
- License for tangled QMK C source files.
-
- #+NAME: license-qmk
- #+BEGIN_SRC C :main no :tangle no
- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
- #+END_SRC
-
-
- ** Subset Mapping
-
- The keymap, build options, and configuration are shared between keyboards. The
- layout is mapped onto keyboards with different physical layouts as a subset
- without code duplication using the QMK userspace feature and C macros.
-
-
- *** Userspace
-
- The keymap is defined for ~LAYOUT_miryoku~ which is 10x4, with the outer 2
- positions on the bottom row unused and the rest of the bottom row being the
- thumb keys.
-
-
- **** [[./rules.mk][users/manna-harbour_miryoku/rules.mk]]
-
- Build options. Automatically included.
-
- #+BEGIN_SRC makefile :noweb yes :padline no :tangle rules.mk
- # <<header>>
-
- MOUSEKEY_ENABLE = yes # Mouse keys
- EXTRAKEY_ENABLE = yes # Audio control and System control
- AUTO_SHIFT_ENABLE = yes # Auto Shift
-
- SRC += manna-harbour_miryoku.c # keymap
-
- # alternative layouts:
-
- # alphas
- ifneq ($(strip $(MIRYOKU_ALPHAS)),)
- OPT_DEFS += -DMIRYOKU_ALPHAS_$(MIRYOKU_ALPHAS)
- endif
-
- # nav
- ifneq ($(strip $(MIRYOKU_NAV)),)
- OPT_DEFS += -DMIRYOKU_NAV_$(MIRYOKU_NAV)
- endif
-
- # clipboard
- ifneq ($(strip $(MIRYOKU_CLIPBOARD)),)
- OPT_DEFS += -DMIRYOKU_CLIPBOARD_$(MIRYOKU_CLIPBOARD)
- endif
-
- # layers
- ifneq ($(strip $(MIRYOKU_LAYERS)),)
- OPT_DEFS += -DMIRYOKU_LAYERS_$(MIRYOKU_LAYERS)
- endif
-
- # subset mappings
- ifneq ($(strip $(MIRYOKU_MAPPING)),)
- OPT_DEFS += -DMIRYOKU_MAPPING_$(MIRYOKU_MAPPING)
- endif
- #+END_SRC
-
-
- **** [[./config.h][users/manna-harbour_miryoku/config.h]]
-
- Config options. Automatically included.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- // default but used in macros
- #undef TAPPING_TERM
- #define TAPPING_TERM 200
-
- // Prevent normal rollover on alphas from accidentally triggering mods.
- #define IGNORE_MOD_TAP_INTERRUPT
-
- // Enable rapid switch from tap to hold, disables double tap hold auto-repeat.
- #define TAPPING_FORCE_HOLD
-
- // Auto Shift
- #define NO_AUTO_SHIFT_ALPHA
- #define AUTO_SHIFT_TIMEOUT TAPPING_TERM
- #define AUTO_SHIFT_NO_SETUP
-
- // Recommended for heavy chording.
- #define QMK_KEYS_PER_SCAN 4
-
- // Mouse key speed and acceleration.
- #undef MOUSEKEY_DELAY
- #define MOUSEKEY_DELAY 0
- #undef MOUSEKEY_INTERVAL
- #define MOUSEKEY_INTERVAL 16
- #undef MOUSEKEY_WHEEL_DELAY
- #define MOUSEKEY_WHEEL_DELAY 0
- #undef MOUSEKEY_MAX_SPEED
- #define MOUSEKEY_MAX_SPEED 6
- #undef MOUSEKEY_TIME_TO_MAX
- #define MOUSEKEY_TIME_TO_MAX 64
- #+END_SRC
-
-
- **** [[./manna-harbour_miryoku.h][users/manna-harbour_miryoku/manna-harbour_miryoku.h]]
-
- Keymap-related definitions. Included from ~manna-harbour_miryoku.c~. Can be
- included from keymap or layout ~keymap.c~ if needed.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle manna-harbour_miryoku.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #include QMK_KEYBOARD_H
-
- #define U_NP KC_NO // key is not present
- #define U_NA KC_NO // present but not available for use
- #define U_NU KC_NO // available but not used
-
- <<table-enums()>>
-
- #if defined MIRYOKU_CLIPBOARD_FUN
- <<table-keycode-mappings(table=clipboard-fun)>>
- #elif defined MIRYOKU_CLIPBOARD_MAC
- <<table-keycode-mappings(table=clipboard-mac)>>
- #elif defined MIRYOKU_CLIPBOARD_WIN
- <<table-keycode-mappings(table=clipboard-win)>>
- #else
- <<table-keycode-mappings(table=clipboard)>>
- #endif
-
-
- #+END_SRC
-
-
- **** [[./manna-harbour_miryoku.c][users/manna-harbour_miryoku/manna-harbour_miryoku.c]]
-
- Contains the keymap. Added from ~rules.mk~.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle manna-harbour_miryoku.c
- // <<header>>
-
- <<license-qmk>>
-
- #include "manna-harbour_miryoku.h"
-
- const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- #if defined MIRYOKU_LAYERS_FLIP
- [BASE] = LAYOUT_miryoku(
- #if defined MIRYOKU_ALPHAS_AZERTY
- <<table-layout-taphold(alphas_table=azerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_COLEMAK
- <<table-layout-taphold(alphas_table=colemak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
- <<table-layout-taphold(alphas_table=colemakdhk, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_DVORAK
- <<table-layout-taphold(alphas_table=dvorak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_HALMAK
- <<table-layout-taphold(alphas_table=halmak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_WORKMAN
- <<table-layout-taphold(alphas_table=workman, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_QWERTY
- <<table-layout-taphold(alphas_table=qwerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #elif defined MIRYOKU_ALPHAS_QWERTZ
- <<table-layout-taphold(alphas_table=qwertz, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #else
- <<table-layout-taphold(alphas_table=colemakdh, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
- #endif
- ),
- #if defined MIRYOKU_NAV_INVERTEDT
- [NAV] = LAYOUT_miryoku(
- <<table-layout-half(half_table=nav-l-invertedt, mode="l", hold_table=hold-flip)>>
- ),
- [MOUSE] = LAYOUT_miryoku(
- <<table-layout-half(half_table=mouse-l-invertedt, mode="l", hold_table=hold-flip)>>
- ),
- [MEDIA] = LAYOUT_miryoku(
- <<table-layout-half(half_table=media-l-invertedt, mode="l", hold_table=hold-flip)>>
- ),
- #else
- [NAV] = LAYOUT_miryoku(
- <<table-layout-half(half_table=nav-l, mode="l", hold_table=hold-flip)>>
- ),
- [MOUSE] = LAYOUT_miryoku(
- <<table-layout-half(half_table=mouse-l, mode="l", hold_table=hold-flip)>>
- ),
- [MEDIA] = LAYOUT_miryoku(
- <<table-layout-half(half_table=media-l, mode="l", hold_table=hold-flip)>>
- ),
- #endif
- [NUM] = LAYOUT_miryoku(
- <<table-layout-half(half_table=num-r, mode="r", hold_table=hold-flip)>>
- ),
- [SYM] = LAYOUT_miryoku(
- <<table-layout-half(half_table=sym-r, mode="r", hold_table=hold-flip)>>
- ),
- [FUN] = LAYOUT_miryoku(
- <<table-layout-half(half_table=fun-r, mode="r", hold_table=hold-flip)>>
- ),
- #else
- [BASE] = LAYOUT_miryoku(
- #if defined MIRYOKU_ALPHAS_AZERTY
- <<table-layout-taphold(alphas_table=azerty)>>
- #elif defined MIRYOKU_ALPHAS_COLEMAK
- <<table-layout-taphold(alphas_table=colemak)>>
- #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
- <<table-layout-taphold(alphas_table=colemakdhk)>>
- #elif defined MIRYOKU_ALPHAS_DVORAK
- <<table-layout-taphold(alphas_table=dvorak)>>
- #elif defined MIRYOKU_ALPHAS_HALMAK
- <<table-layout-taphold(alphas_table=halmak)>>
- #elif defined MIRYOKU_ALPHAS_WORKMAN
- <<table-layout-taphold(alphas_table=workman)>>
- #elif defined MIRYOKU_ALPHAS_QWERTY
- <<table-layout-taphold(alphas_table=qwerty)>>
- #elif defined MIRYOKU_ALPHAS_QWERTZ
- <<table-layout-taphold(alphas_table=qwertz)>>
- #else
- <<table-layout-taphold(alphas_table=colemakdh)>>
- #endif
- ),
- #if defined MIRYOKU_NAV_VI
- [NAV] = LAYOUT_miryoku(
- <<table-layout-half(half_table=nav-r-vi, mode="r")>>
- ),
- [MOUSE] = LAYOUT_miryoku(
- <<table-layout-half(half_table=mouse-r-vi, mode="r")>>
- ),
- [MEDIA] = LAYOUT_miryoku(
- <<table-layout-half(half_table=media-r-vi, mode="r")>>
- ),
- #else
- [NAV] = LAYOUT_miryoku(
- <<table-layout-half(half_table=nav-r, mode="r")>>
- ),
- [MOUSE] = LAYOUT_miryoku(
- <<table-layout-half(half_table=mouse-r, mode="r")>>
- ),
- [MEDIA] = LAYOUT_miryoku(
- <<table-layout-half(half_table=media-r, mode="r")>>
- ),
- #endif
- [NUM] = LAYOUT_miryoku(
- <<table-layout-half(half_table=num-l, mode="l")>>
- ),
- [SYM] = LAYOUT_miryoku(
- <<table-layout-half(half_table=sym-l, mode="l")>>
- ),
- [FUN] = LAYOUT_miryoku(
- <<table-layout-half(half_table=fun-l, mode="l")>>
- ),
- #endif
- [BUTTON] = LAYOUT_miryoku(
- <<table-layout-full(table=button)>>
- )
- };
- #+END_SRC
-
-
- *** Layouts
-
- To use the keymap on a keyboard supporting the layouts feature, ~LAYOUT_miryoku~
- is defined as a macro mapping onto the layout's own ~LAYOUT~ macro, leaving the
- unused keys as ~KC_NO~.
-
- For keyboards supporting multiple layouts for which subset mappings are
- available, select the layout with ~FORCE_LAYOUT~ in the ~make~ command line when
- building. E.g.:
-
- #+BEGIN_SRC sh :tangle no
- make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck_mit
- make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # ortho_4x12
- #+END_SRC
-
-
- **** 60_ansi
-
- An angled ortho split layout is mapped onto the row-staggered keyboard. The
- rows are moved up to better position the thumb keys, the hands are separated as
- much as possible, and the left hand column angle is reversed to reduce ulnar
- deviation of the wrists.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-60_ansi.png]]
-
- An alternative subset mapping is also provided without reverse column angle. To
- select this mapping, append ~MIRYOKU_MAPPING=NOREVERSEANGLE~ to the ~make~
- command line when building.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-60_ansi-noreverseangle.png]]
-
- Another alternative subset mapping is provided mapping only the 3x10 alphas,
- plus spacebar for space / Nav, with the remainder being the default 60_ansi
- keymap with semicolon in place of quote. To select this mapping, append
- ~MIRYOKU_MAPPING=LITE~ to the ~make~ command line when building.
-
- Keyboards supporting this layout: alps64, amj60, bakeneko60, bm60poker, bm60rgb, do60, dp60, dz60, facew, gskt00, infinity60, jm60, kc60, kc60se, ok60, org60, paladin64, panc60, reviung61, smk60, v60_type_r, yd60mq, 1upkeyboards/1up60hse, 1upkeyboards/1up60rgb, 40percentclub/luddite, acheron/keebspcb, acheron/lasgweloth, ai03/polaris, akegata_denki/device_one, atxkb/1894, bioi/g60ble, bt66tech/bt66tech60, cannonkeys/an_c, cannonkeys/instant60, cannonkeys/practice60, clawsome/coupe, dm9records/tartan, duck/eagle_viper, evyd13/plain60, exclusive/e6_rgb, gh60/revc, gh60/satan, gh60/v1p3, handwired/xealousbrown, hineybush/h60, hs60/v1, keebio/wtf60, noxary/260, playkbtw/pk60, ryloo_studio/m0110, thevankeyboards/bananasplit, wilba_tech/zeal60, xd60/rev2, xd60/rev3, cannonkeys/db60/hotswap, cannonkeys/db60/j02, cannonkeys/db60/rev2, exclusive/e6v2/le, exclusive/e6v2/oe, foxlab/leaf60/universal, handwired/co60/rev1, handwired/co60/rev7, handwired/swiftrax/nodu, hs60/v2/ansi, inett_studio/sqx/universal, melgeek/mj61/rev1, melgeek/mj61/rev2, melgeek/mj63/rev1, melgeek/mj63/rev2, sentraq/s60_x/default, sentraq/s60_x/rgb.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make dz60:manna-harbour_miryoku:flash # dz60
- make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=NOREVERSEANGLE # dz60, without reverse column angle
- make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=LITE # dz60, with lite mapping
- #+END_SRC
-
-
- ***** [[../../layouts/community/60_ansi/manna-harbour_miryoku/config.h][layouts/community/60_ansi/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/60_ansi/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #if defined MIRYOKU_MAPPING_NOREVERSEANGLE
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_60_ansi(\
- K00, K01, K02, K03, K04, XXX, XXX, XXX, K05, K06, K07, K08, K09, XXX,\
- K10, K11, K12, K13, K14, XXX, XXX, XXX, K15, K16, K17, K18, K19, XXX,\
- K20, K21, K22, K23, K24, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
- XXX, K32, K33, K34, XXX, XXX, XXX, XXX, K35, K36, K37, XXX,\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX\
- )
- #elif defined MIRYOKU_MAPPING_LITE
- #if defined MIRYOKU_LAYERS_FLIP
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_60_ansi( \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
- KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \
- KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \
- KC_LCTL, KC_LGUI, KC_LALT, K36, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \
- )
- #else
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_60_ansi( \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
- KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \
- KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \
- KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \
- KC_LCTL, KC_LGUI, KC_LALT, K33, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \
- )
- #endif
- #else
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_60_ansi(\
- XXX, XXX, K00, K01, K02, K03, K04, XXX, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, XXX, XXX, K15, K16, K17, K18, K19, XXX,\
- K20, K21, K22, K23, K24, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
- XXX, XXX, K32, K33, K34, XXX, XXX, XXX, K35, K36, K37, XXX,\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX\
- )
- #endif
- #+END_SRC
-
-
- ***** [[../../layouts/community/60_ansi/manna-harbour_miryoku/keymap.c][layouts/community/60_ansi/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/60_ansi/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ergodox
-
- For the ergodox layout, the main 5x3 alphas are used as usual. The primary and
- secondary thumb keys are the inner and outer 2u thumb keys and the tertiary
- thumb key is the innermost key of the partial bottom row. The remaining keys
- are unused.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ergodox.png]]
-
- Keyboards supporting this layout: ergodone, ergodox_ez, ergodox_infinity, hotdox.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make ergodox_infinity:manna-harbour_miryoku:flash # ergodox_infinity
- make ergodox_ez:manna-harbour_miryoku:flash # ergodox_ez
- #+END_SRC
-
-
- ***** [[../../layouts/community/ergodox/manna-harbour_miryoku/config.h][layouts/community/ergodox/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ergodox/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ergodox_pretty(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, XXX, XXX, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- XXX, XXX, XXX, XXX, K32, K37, XXX, XXX, XXX, XXX,\
- XXX, XXX, XXX, XXX,\
- XXX, XXX,\
- K33, K34, XXX, XXX, K35, K36\
- )
- #+END_SRC
-
-
- ***** [[../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c][layouts/community/ergodox/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ortho_4x10
-
- An alternative with 180 degree rotation is also provided to enable the USB cable to be relocated for use with laptops. To select this mapping, append ~MIRYOKU_MAPPING=ROTATE~ to the ~make~ command line when building.
-
- Keyboards supporting this layout: newgame40, nimrod, marksard/rhymestone, pabile/p40.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make marksard/rhymestone:manna-harbour_miryoku:flash # marksard/rhymestone
- make pabile/p40:manna-harbour_miryoku:flash MIRYOKU_MAPPING=ROTATE # pabile/p40, rotate
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/config.h][layouts/community/ortho_4x10/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_4x10/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #if defined MIRYOKU_MAPPING_ROTATE
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_ortho_4x10( \
- XXX, XXX, K37, K36, K35, K34, K33, K32, XXX, XXX, \
- K29, K28, K27, K26, K25, K24, K23, K22, K21, K20, \
- K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, \
- K09, K08, K07, K06, K05, K04, K03, K02, K01, K00 \
- )
- #else
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_ortho_4x10( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \
- )
- #endif
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ortho_4x12
-
- For the ortho_4x12 layout, the middle two columns, and the 2 keys on each end of
- the bottom row are unused. This allows the hands to be positioned without ulnar
- deviation of the wrists.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12.png]]
-
- For split keyboards using this layout the halves can be positioned and rotated
- for each hand and so an alternative mapping is provided. The right half is as
- follows: The rightmost column bottom 3 keys is the pinkie column. The middle 4
- columns top 3 rows are for the remaining fingers. The pinkie column is one row
- lower than the other columns to provide some column stagger. The bottom row
- left 3 keys are the thumb keys. The remaining keys are unused. To select this
- mapping, append ~MIRYOKU_MAPPING=SPLIT~ to the ~make~ command line when
- building.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12-split.png]]
-
- An alternative with extended thumb position but without pinkie column stagger is
- also provided. To select this mapping, append ~MIRYOKU_MAPPING=EXTENDED_THUMBS~
- to the ~make~ command line when building.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12-extended_thumbs.png]]
-
- Keyboards supporting this layout: chimera_ls, contra, efreet, jj40, jnao, lets_split, lets_split_eh, meira, niu_mini, quark, tau4, telophase, vitamins_included, zlant, 40percentclub/4x4, 40percentclub/nori, acheron/shark, boardsource/4x12, cannonkeys/ortho48, dm9records/plaid, evyd13/eon40, evyd13/pockettype, handwired/floorboard, handwired/jotanck, handwired/wulkan, kbdfans/kbd4x, keebio/levinson, keebio/wavelet, mechstudio/ud_40_ortho, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, rgbkb/zygomorph, zvecr/split_blackpill, zvecr/zv48, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3, montsinger/rebound/rev1, montsinger/rebound/rev2, montsinger/rebound/rev3, montsinger/rebound/rev4, signum/3_0/elitec, spaceman/pancake/feather, spaceman/pancake/promicro, ymdk/ymd40/v2.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # planck, ortho_4x12
- make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 MIRYOKU_MAPPING=EXTENDED_THUMBS # planck, ortho_4x12, extended thumbs
- make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # levinson
- make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # levinson, extended thumbs
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/config.h][layouts/community/ortho_4x12/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_4x12/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #if defined MIRYOKU_MAPPING_SPLIT
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_4x12(\
- KC_NO, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, KC_NO,\
- K00, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K09,\
- K10, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K19,\
- K20, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, K29\
- )
- #elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_4x12(\
- K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29,\
- KC_NO, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, KC_NO\
- )
- #else
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_4x12(\
- K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29,\
- KC_NO, KC_NO, K32, K33, K34, KC_NO, KC_NO, K35, K36, K37, KC_NO, KC_NO\
- )
- #endif
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ortho_5x12
-
- As per ortho_4x12 but the top row is unused.
-
- Keyboards supporting this layout: fractal, jj50, jnao, boardsource/5x12, cannonkeys/atlas_alps, cannonkeys/ortho60, handwired/jot50, handwired/riblee_f401, handwired/riblee_f411, handwired/rs60, keycapsss/o4l_5x12, peej/lumberjack, preonic/rev1, preonic/rev2, preonic/rev3, rgbkb/zygomorph, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make preonic/rev3:manna-harbour_miryoku:flash # preonic/rev3
- make preonic/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # preonic/rev3, extended thumbs
- make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # nyquist/rev3, split
- make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # nyquist/rev3, extended thumbs
-
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/config.h][layouts/community/ortho_5x12/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_5x12/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #if defined MIRYOKU_MAPPING_SPLIT
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_5x12(\
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
- KC_NO, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, KC_NO,\
- K00, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K09,\
- K10, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K19,\
- K20, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, K29\
- )
- #elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_5x12(\
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
- K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29,\
- KC_NO, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, KC_NO\
- )
- #else
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_5x12(\
- KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
- K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29,\
- KC_NO, KC_NO, K32, K33, K34, KC_NO, KC_NO, K35, K36, K37, KC_NO, KC_NO\
- )
- #endif
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ortho_5x15
-
- For the ortho_5x15 layout, the top row, middle 5 columns, and the 2 keys on each
- end of the bottom row are unused. This allows the hands to be positioned
- without ulnar deviation of the wrists.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_5x15.png]]
-
- An alternative subset mapping is also provided with the thumb keys shifted
- across one position in the direction of thumb extension. To select this
- mapping, append ~MIRYOKU_MAPPING=EXTENDED_THUMBS~ to the ~make~ command line
- when building.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_5x15-extended_thumbs.png]]
-
- Keyboards supporting this layout: atomic, geminate60, idobo, punk75, xd75, 40percentclub/5x5, 40percentclub/i75, cannonkeys/ortho75, sendyyeah/75pixels.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make atomic:manna-harbour_miryoku:flash # atomic
- make atomic:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # atomic, extended thumbs
- make idobo:manna-harbour_miryoku:flash # idobo
- #+END_SRC
-
-
- ***** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/config.h][layouts/community/ortho_5x15/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_5x15/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_5x15(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
- XXX, XXX, XXX, K32, K33, K34, XXX, XXX, XXX, K35, K36, K37, XXX, XXX, XXX\
- )
- #else
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_ortho_5x15(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
- XXX, XXX, K32, K33, K34, XXX, XXX, XXX, XXX, XXX, K35, K36, K37, XXX, XXX\
- )
- #endif
- #+END_SRC
-
- #+RESULTS:
-
-
- ***** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** planck_mit
-
- The middle two columns including the middle 2u key, and the 2 keys on each end
- of the bottom row are unused.
-
- Keyboards supporting this layout: bm40hsrgb, contra, efreet, jj40, latin47ble, mt40, niu_mini, quark, zlant, dm9records/plaid, evyd13/eon40, handwired/aranck, handwired/heisenberg, kbdfans/kbd4x, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, spaceman/pancake/feather, spaceman/pancake/promicro.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make planck/ez:manna-harbour_miryoku:flash # planck ez
- make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck rev6, mit
-
- #+END_SRC
-
- ***** [[../../layouts/community/planck_mit/manna-harbour_miryoku/config.h][layouts/community/planck_mit/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/planck_mit/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_planck_mit(\
- K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29,\
- KC_NO, KC_NO, K32, K33, K34, KC_NO, K35, K36, K37, KC_NO, KC_NO\
- )
- #+END_SRC
-
-
- ***** [[../../layouts/community/planck_mit/manna-harbour_miryoku/keymap.c][layouts/community/planck_mit/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/planck_mit/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** split_3x5_3
-
- Keyboards supporting this layout: arch_36, boardsource/microdox, centromere, crkbd, eek, miniaxe, minidox/rev1, pteron36, squiggle/rev1, suihankey/split/rev1.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make crkbd:manna-harbour_miryoku:flash # crkbd
- make minidox:manna-harbour_miryoku:flash # minidox
- #+END_SRC
-
-
- ***** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/config.h][layouts/community/split_3x5_3/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/split_3x5_3/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_split_3x5_3(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- K32, K33, K34, K35, K36, K37\
- )
- #+END_SRC
-
-
- ***** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** split_3x6_3
-
- The outer columns are unused.
-
- Keyboards supporting this layout: centromere, crkbd, bastardkb/tbkmini.
-
- Example build command lines:
-
- #+BEGIN_SRC sh :tangle no
- make bastardkb/tbkmini:manna-harbour_miryoku:flash # bastardkb/tbkmini
- make crkbd:manna-harbour_miryoku:flash # crkbd
- #+END_SRC
-
-
- ***** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/config.h][layouts/community/split_3x6_3/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/split_3x6_3/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_split_3x6_3(\
- KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO,\
- KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO,\
- KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO,\
- K32, K33, K34, K35, K36, K37\
- )
- #+END_SRC
-
-
- ***** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- *** Keyboards
-
- To use the keymap on a keyboard which does not support the layouts feature,
- ~LAYOUT_miryoku~ is defined as a macro mapping onto the keyboard's own ~LAYOUT~
- macro, leaving the unused keys as ~KC_NO~.
-
-
- **** atreus
-
- Only the main 5x3 alphas and the inner 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make atreus:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/atreus/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/atreus/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** bastardkb/scylla
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make bastardkb/scylla:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h][keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_split_4x6_5( \
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, \
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \
- XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, XXX, \
- K32, K33, K34, K35, K36, K37, \
- XXX, XXX, XXX, XXX \
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c][keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** ergotravel
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make ergotravel:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h][keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT( \
- XXX, K00, K01, K02, K03, K04, XXX, XXX, K05, K06, K07, K08, K09, XXX, \
- XXX, K10, K11, K12, K13, K14, XXX, XXX, K15, K16, K17, K18, K19, XXX, \
- XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX, \
- XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX \
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c][keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** for_science
-
- The top row is unused.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make for_science:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/config.h][keyboards/for_science/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/for_science/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- K32, K33, K34, K35, K36, K37\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c][keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** gergo
-
- Only the main 5x3 alphas and the outer 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make gergo:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/config.h][keyboards/gergo/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/gergo/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_gergo(\
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, XXX, XXX, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- K32, K33, K34, XXX, XXX, K35, K36, K37\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c][keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** handwired/dactyl_manuform/4x5
-
- Only the main 5x3 alphas and the main 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make handwired/dactyl_manuform/4x5:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- XXX, XXX, XXX, XXX, \
- K32, K33, K36, K37, \
- K34, XXX, XXX, K35, \
- XXX, XXX, XXX, XXX \
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** handwired/dactyl_manuform/5x6
-
- Only the main 5x3 alphas and the main 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make handwired/dactyl_manuform/5x6:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_5x6( \
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, \
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \
- XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, XXX, \
- XXX, XXX, XXX, XXX, \
- K32, K33, K36, K37, \
- K34, XXX, XXX, K35, \
- XXX, XXX, XXX, XXX \
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** keebio/iris
-
- Only the main 5x3 alphas and the bottom 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make keebio/iris/rev4:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- K32, K33, K34, K35, K36, K37\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** keyboardio/atreus
-
- Only the main 5x3 alphas and the inner 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make keyboardio/atreus:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, \
- XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX \
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** lily58
-
- Only the main 5x3 alphas and the inner 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make lily58:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/config.h][keyboards/lily58/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/lily58/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- XXX, K32, K33, K34, K35, K36, K37, XXX\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c][keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** moonlander
-
- The main 5x3 alphas are used as usual. The primary, secondary, and tertiary
- thumb keys are the closest piano key, middle piano key, and the innermost key of
- the partial bottom row, respectively. The remaining keys are unused.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make moonlander:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h][keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT_moonlander(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, XXX, XXX, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, XXX, XXX, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, XXX,\
- XXX, XXX, XXX, XXX, K32, XXX, XXX, K37, XXX, XXX, XXX, XXX,\
- K33, K34, XXX, XXX, K35, K36\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c][keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** redox_w
-
- Only the main 5x3 alphas and the main 3 thumb keys are used.
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make redox_w:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h][keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, XXX, XXX, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, XXX, XXX, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- XXX, XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX, XXX\
- )
- #+END_SRC
-
- #+RESULTS:
-
-
- ***** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c][keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** sofle
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make sofle:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/config.h][keyboards/sofle/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/sofle/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #define LAYOUT_miryoku(\
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
- )\
- LAYOUT(\
- XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX,\
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX,\
- XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\
- XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX\
- )
- #+END_SRC
-
-
- ***** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c][keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** splitkb/kyria
-
- Only the main 5x3 alphas and the middle 3 lower thumb keys are used.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria.png]]
-
- An alternative subset mapping is also provided with the thumb keys shifted one
- position in the direction of thumb extension. To select this mapping, append
- ~MIRYOKU_MAPPING=EXTENDED_THUMBS~ to the ~make~ command line when building.
-
- [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria-extended_thumbs.png]]
-
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make splitkb/kyria:manna-harbour_miryoku:flash
- make splitkb/kyria:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # extended thumb position
- #+END_SRC
-
-
- ***** [[../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h][keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define XXX KC_NO
-
- #if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT( \
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \
- XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \
- XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \
- )
- #else
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT( \
- XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \
- XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \
- XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \
- XXX, K32, K33, K34, XXX, XXX, K35, K36, K37, XXX \
- )
- #endif
- #+END_SRC
-
-
- ***** [[../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c][keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- **** torn
-
- To build for this keyboard,
-
- #+BEGIN_SRC sh :tangle no
- make torn:manna-harbour_miryoku:flash
- #+END_SRC
-
-
- ***** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/config.h][keyboards/torn/keymaps/manna-harbour_miryoku/config.h]]
-
- Contains subset mapping.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/torn/keymaps/manna-harbour_miryoku/config.h
- // <<header>>
-
- <<license-qmk>>
-
- #pragma once
-
- #define LAYOUT_miryoku( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
- N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
- ) \
- LAYOUT_split_3x6_4( \
- KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO, \
- KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \
- KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, \
- KC_NO, K32, K33, K34, K35, K36, K37, KC_NO \
- )
- #+END_SRC
-
- #+RESULTS:
-
-
- ***** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c][keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c]]
-
- Required by the build system.
-
- #+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c
- // <<header>>
-
- <<license-qmk>>
- #+END_SRC
-
-
- *** Customisation
-
- To add customisations to a keyboard or layout while importing the miryoku
- keymap, copy ~config.h~ and ~keymap.c~ from the keyboard or layout's
- ~manna-harbour_miryoku/~ directory to a new directory, and create ~rules.mk~
- containing ~USER_NAME := manna-harbour_miryoku~. The miryoku keymap will be
- imported and customisations can be added to those files as usual. Keycodes can
- be added to unused keys by editing ~LAYOUT_miryoku~ in ~config.h~.
-
- For an unsupported keyboard or layout, do as above with a similar keyboard or
- layout and modify ~LAYOUT_miryoku~ in ~config.h~ referring to the keyboard or
- layout's ~LAYOUT~ macro.
-
-
- **** Examples
-
- To use any of the examples, create a new branch from the miryoku development
- branch and follow the same steps as seen in the commit messages and code changes
- in the examples, making the appropriate changes for your keyboard and desired
- customisations.
-
-
- ***** Add Layers
-
- - https://github.com/manna-harbour/qmk_firmware/commits/miryoku-examples-add-layers/keyboards/crkbd/keymaps/miryoku-examples-add-layers
-
-
- ** Experimental Features
-
-
- *** Bilateral Combinations
-
- - [[https://github.com/manna-harbour/qmk_firmware/issues/29][Bilateral Combinations]]
-
-
- *** Retro Shift
-
- - [[https://github.com/manna-harbour/qmk_firmware/issues/33][Retro Shift]]
-
-
- ** Documentation
-
-
- *** QMK
-
- - https://docs.qmk.fm/
- - https://docs.qmk.fm/#/config_options
- - https://docs.qmk.fm/#/feature_advanced_keycodes
- - https://docs.qmk.fm/#/feature_auto_shift
- - https://docs.qmk.fm/#/feature_layers
- - https://docs.qmk.fm/#/feature_layouts
- - https://docs.qmk.fm/#/feature_mouse_keys
- - https://docs.qmk.fm/#/feature_userspace
- - https://docs.qmk.fm/#/getting_started_introduction
- - https://docs.qmk.fm/#/getting_started_make_guide
- - https://docs.qmk.fm/#/keycodes
- - https://docs.qmk.fm/#/mod_tap
- - https://docs.qmk.fm/#/tap_hold
-
-
- *** Org Mode
-
- - https://orgmode.org/
- - https://orgmode.org/manual/Tables.html
- - https://orgmode.org/manual/Working-with-Source-Code.html
-
-
- **
-
- [[https://github.com/manna-harbour][https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/manna-harbour-boa-32.png]]
|