- XT to USB keyboard converter
- ==============================
- This is a port of TMK's converter/xt_usb to QMK.
-
- This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
-
-
- Connect Wires
- -------------
- 1. Connect **Vcc** and **GND**.
- 2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`.
- 3. You need pull-up resistor. **1K-10K Ohm** will be OK.
-
-
- XT keyboard protocol resource
- ------------------------------
- https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol
|