- /* Copyright 2020 tominabox1
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0x7431
- #define PRODUCT_ID 0xD645
- #define DEVICE_VER 0x0001
- #define MANUFACTURER tominabox1
- #define PRODUCT Le Chiffre
-
- /* key matrix size */
- #define MATRIX_ROWS 4
- #define MATRIX_COLS 10
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { B3, D4, F1, C6 }
- #define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
- #define UNUSED_PINS
-
- /* COL2ROW, ROW2COL*/
- #define DIODE_DIRECTION ROW2COL
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /* Define encoder pads */
- #define ENCODERS_PAD_A { D5 }
- #define ENCODERS_PAD_B { D3 }
-
- /*
- * WS2812 Underglow Matrix options
- */
- #define RGB_DI_PIN F0
- #define RGBLED_NUM 11
-
- #define DRIVER_LED_TOTAL RGBLED_NUM
-
- #define RGBLIGHT_ANIMATIONS
-
- #ifdef RGB_MATRIX_ENABLE
- #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
- #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
- #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
- #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
- #define RGB_MATRIX_HUE_STEP 8
- #define RGB_MATRIX_SAT_STEP 8
- #define RGB_MATRIX_VAL_STEP 8
- #define RGB_MATRIX_SPD_STEP 10
- #endif
|