- #pragma once
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
- #undef MATRIX_ROW_PINS
- #undef MATRIX_COL_PINS
-
- #define MATRIX_ROW_PINS { A3, B8, B9, B1 }
- #define MATRIX_COL_PINS { A7, A8, B2, B10 }
-
- //Audio
- #undef AUDIO_VOICES
- #undef AUDIO_PIN
- #define AUDIO_PIN A5
- #define AUDIO_PIN_ALT A4
- #define AUDIO_PIN_ALT_AS_NEGATIVE
-
- #ifdef AUDIO_ENABLE
- #define STARTUP_SONG SONG(ONE_UP_SOUND)
- // #define STARTUP_SONG SONG(NO_SOUND)
-
- #define AUDIO_CLICKY
- /* to enable clicky on startup */
- //#define AUDIO_CLICKY_ON
- #define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
- #endif
-
- // configure oled driver for the 128x32 oled
- #define OLED_UPDATE_INTERVAL 33 // ~30fps
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
-
- /* Haptic Driver initialization settings
- * Feedback Control Settings */
- #define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
- #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
- #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
-
- /* default 3V ERM vibration motor voltage and library*/
- #if FB_ERM_LRA == 0
- #define RATED_VOLTAGE 3
- #define V_RMS 2.3
- #define V_PEAK 3.30
- /* Library Selection */
- #define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- /* default 2V LRA voltage and library */
- #elif FB_ERM_LRA == 1
- #define RATED_VOLTAGE 2
- #define V_RMS 2.0
- #define V_PEAK 2.85
- #define F_LRA 200
- /* Library Selection */
- #define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- #endif
-
- /* Control 1 register settings */
- #define DRIVE_TIME 25
- #define AC_COUPLE 0
- #define STARTUP_BOOST 1
-
- /* Control 2 Settings */
- #define BIDIR_INPUT 1
- #define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
- #define SAMPLE_TIME 3
- #define BLANKING_TIME 1
- #define IDISS_TIME 1
-
- /* Control 3 settings */
- #define NG_THRESH 2
- #define ERM_OPEN_LOOP 1
- #define SUPPLY_COMP_DIS 0
- #define DATA_FORMAT_RTO 0
- #define LRA_DRIVE_MODE 0
- #define N_PWM_ANALOG 0
- #define LRA_OPEN_LOOP 0
- /* Control 4 settings */
- #define ZC_DET_TIME 0
- #define AUTO_CAL_TIME 3
-
- #define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- #define RGBLIGHT_EFFECT_SNAKE
- #define RGBLIGHT_EFFECT_KNIGHT
- #define RGBLIGHT_EFFECT_CHRISTMAS
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_EFFECT_RGB_TEST
- #define RGBLIGHT_EFFECT_ALTERNATING
- #define RGBLIGHT_EFFECT_TWINKLE
-
- #define RGBLED_NUM 10
- #define RGB_DI_PIN B5
- #define RGB_MATRIX_LED_COUNT RGBLED_NUM
-
- #define RGB_MATRIX_KEYPRESSES
-
- #define SOLENOID_PIN A14
|