|
|
- /*
- Copyright 2012 Jun Wako <wakojun@gmail.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0x5945 // "YE"
- #define PRODUCT_ID 0x0001
- #define DEVICE_VER 0x0001
- #define MANUFACTURER YDKB
- #define PRODUCT Chili
-
- /* key matrix size */
- #define MATRIX_ROWS 11
- #define MATRIX_COLS 10
-
- // ROWS: Top to bottom, COLS: Left to right
- /* Row pin configuration
- */
- #define MATRIX_ROW_PINS { F5, F4, F1, F0, E6, B0, D5, D3, D2, D1, D0 }
- /* Column pin configuration
- */
- #define MATRIX_COL_PINS { D4, F6, F7, C7, C6, B6, B5, B4, D7, D6 }
- #define UNUSED_PINS
-
- /* COL2ROW or ROW2COL */
- #define DIODE_DIRECTION COL2ROW
-
- #define LED_NUM_LOCK_PIN B1
- #define LED_CAPS_LOCK_PIN B2
- #define LED_SCROLL_LOCK_PIN B3
- #define LED_PIN_ON_STATE 0
-
- #define BACKLIGHT_PIN B7
- #define BACKLIGHT_BREATHING
- #define BACKLIGHT_LEVELS 3
-
- /* Underlight configuration
- */
- #define RGB_DI_PIN B3
- #define RGBLIGHT_ANIMATIONS
- #define RGBLED_NUM 30 // Number of LEDs
- #define RGBLIGHT_HUE_STEP 5
- #define RGBLIGHT_SAT_STEP 10
- #define RGBLIGHT_VAL_STEP 10
-
- /* define if matrix has ghost */
- //#define MATRIX_HAS_GHOST
-
- /* Set 0 if debouncing isn't needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
|