|
|
- # merro60
-
- merro60 PCB
-
- A standard 60% format keyboard pcb with USB-C and unified daughterboard compatibility.
- Has modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
-
- Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)
- Hardware Supported: chlx PCB merro60.1, merro60.1.1, merro60.1.2
-
- Enter bootloader mode by any of the following options -
- - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
- - When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
- - When plugged in, shorting out the two reset metal contacts near the spacebar switch location (NOT the spacebar switch pin holes)
-
- Make example for this keyboard (after setting up your build environment):
-
- make chlx/merro60:default
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|