- /*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- /* Handedness. */
- #define MASTER_RIGHT
-
- // To use the handedness pin, resistors need to be installed on the adapter PCB.
- // If so, uncomment the following code, and undefine MASTER_RIGHT above.
- // #define A0 PAL_LINE(GPIOA, 0)
- // #define SPLIT_HAND_PIN A0
- // #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
-
- /* RGB settings. */
- #define RGB_DI_PIN D3
- #define WS2812_PWM_DRIVER PWMD2
- #define WS2812_PWM_CHANNEL 4
- #define WS2812_PWM_PAL_MODE 1
- #define WS2812_DMA_STREAM STM32_DMA1_STREAM7
- #define WS2812_DMA_CHANNEL 3
-
- /* CRC. */
- #define CRC8_USE_TABLE
- #define CRC8_OPTIMIZE_SPEED
-
- /* SPI config for pmw3360 sensor. */
- #define SPI_DRIVER SPID1
- #define SPI_SCK_PIN B1
- #define SPI_SCK_PAL_MODE 5
- #define SPI_MOSI_PIN B2
- #define SPI_MOSI_PAL_MODE 5
- #define SPI_MISO_PIN B3
- #define SPI_MISO_PAL_MODE 5
-
- /* PMW3360 settings. */
- #define A1 PAL_LINE(GPIOA, 1)
- #define POINTING_DEVICE_CS_PIN A1
- #define PMW3360_CS_MODE 3
- #define PMW3360_CS_DIVISOR 64
|