|
|
- # Krush65
-
- A 65% keyboard sold in several variants.
-
- 1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case.
-
- **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
-
- * Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
- * Hardware Supported: Krush65
- * Hardware Availability: [Mechkey.store](https://mechkey.store/)
-
- Make examples for this keyboard (after setting up your build environment):
-
- make sawnsprojects/krush/krush65/solder:default
-
- ## Bootloader
-
- Enter the bootloader in 3 ways:
-
- * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
- * **Keycode in layout**: Press the key mapped to `RESET` if it is available
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|