|
|
- # Blaster 75
-
- Blaster 75 is a 75% ANSI layout Custom Keyboard designed and manufactured by Altain.
-
- * Keyboard Maintainer : ALTAiN
- * Hardware Supported : Blaster 75
- * Hardware Availability : Produced and Sold by ALTAiN
- * Mount : Top-Mount System
- * Typing Angle : 6 Degree
- * Front Height : 20.2mm
-
- ## How to enter Bootloader Mode
-
- Enter the bootloader in 3 ways:
-
- * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
- We strongly recommend this method. If the PCB is not soldered with switches at the moment, use anything that's metal (twizzers for example)
- to short the (0,0) position key ("ESC" in our PCB) while plugging the USB in.
-
- * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
- * **Keycode in layout**: Press the key mapped to `RESET` if it is available
-
- Make example for this keyboard (after setting up your build environment):
-
- make blaster75:default
-
- Flashing example for this keyboard:
-
- make blaster75:default:flash
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|