|
|
- # Galatea
-
- TKL H87/88c compatible PCB with support for the most common layouts.
-
- * Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/)
- * Hardware Supported: [studiokestra.ca/galatea](https://studiokestra.ca/galatea/)
- * Hardware Availability: In-Stock Sale (Dec 2021)
- * Rev1 firmware is used for Galatea PCBs with no RGB underglow.
- * Rev2 firmware is used for Galatea PCBs with RGB underglow.
-
- ## Bootload Sequence
-
- There are 3 ways to put the board in bootloader mode:
-
- - Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR
- - While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR
- - With the default layout, toggle Layer 1 and press the `R` key.
-
- ## Compiling Firmware
-
- Make example for this keyboard (after setting up your build environment):
-
- make studiokestra/galatea/rev1:default
-
- If no revision is specified, it will build rev1 firmware by default.
-
- See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|