- /*
- * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef REV3_CONFIG_H
- #define REV3_CONFIG_H
-
- /* USB Device descriptor parameter */
- #define DEVICE_VER 0x0003
-
- #undef MATRIX_ROWS
- #undef MATRIX_COLS
- /* key matrix size */
- #define MATRIX_ROWS 5
- #define MATRIX_COLS 15
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #undef MATRIX_ROW_PINS
- #undef MATRIX_COL_PINS
-
- #define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 }
- #define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 }
- #define UNUSED_PINS
-
- #define ENCODERS_PAD_A { B13 }
- #define ENCODERS_PAD_B { B14 }
-
-
- //Audio
- #undef AUDIO_VOICES
- #undef AUDIO_PIN
- #define AUDIO_PIN A5
- #define AUDIO_PIN_ALT A4
- #define AUDIO_PIN_ALT_AS_NEGATIVE
-
-
- #ifdef AUDIO_ENABLE
- #define STARTUP_SONG SONG(PLANCK_SOUND)
- // #define STARTUP_SONG SONG(NO_SOUND)
-
- #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
- SONG(COLEMAK_SOUND), \
- SONG(DVORAK_SOUND) \
- }
- #define AUDIO_CLICKY
- /* to enable clicky on startup */
- //#define AUDIO_CLICKY_ON
- #define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
- #endif
-
- //configure qwiic micro_oled driver for the 128x32 oled
- #ifdef QWIIC_MICRO_OLED_ENABLE
-
- #undef I2C_ADDRESS_SA0_1
- #define I2C_ADDRESS_SA0_1 0b0111100
- #define LCDWIDTH 128
- #define LCDHEIGHT 32
- #define micro_oled_rotate_180
-
- #endif
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- // #define DEBOUNCE 6
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- //#define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- //#define LOCKING_RESYNC_ENABLE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
- /*
- * MIDI options
- */
-
- /* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
- */
-
- #define MIDI_BASIC
-
- /* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
- */
- //#define MIDI_ADVANCED
-
- /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
- //#define MIDI_TONE_KEYCODE_OCTAVES 2
-
- /* Haptic Driver initialization settings
- * Feedback Control Settings */
- #define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
- #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
- #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
-
- /* default 3V ERM vibration motor voltage and library*/
- #if FB_ERM_LRA == 0
- #define RATED_VOLTAGE 3
- #define V_RMS 2.3
- #define V_PEAK 3.30
- /* Library Selection */
- #define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- /* default 2V LRA voltage and library */
- #elif FB_ERM_LRA == 1
- #define RATED_VOLTAGE 2
- #define V_RMS 2.0
- #define V_PEAK 2.85
- #define F_LRA 200
- /* Library Selection */
- #define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
- #endif
-
- /* Control 1 register settings */
- #define DRIVE_TIME 25
- #define AC_COUPLE 0
- #define STARTUP_BOOST 1
-
- /* Control 2 Settings */
- #define BIDIR_INPUT 1
- #define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
- #define SAMPLE_TIME 3
- #define BLANKING_TIME 1
- #define IDISS_TIME 1
-
- /* Control 3 settings */
- #define NG_THRESH 2
- #define ERM_OPEN_LOOP 1
- #define SUPPLY_COMP_DIS 0
- #define DATA_FORMAT_RTO 0
- #define LRA_DRIVE_MODE 0
- #define N_PWM_ANALOG 0
- #define LRA_OPEN_LOOP 0
- /* Control 4 settings */
- #define ZC_DET_TIME 0
- #define AUTO_CAL_TIME 3
-
- #define RGBLIGHT_ANIMATIONS
-
- #define RGBLED_NUM 10
- #define RGB_DI_PIN B5
- #define DRIVER_LED_TOTAL RGBLED_NUM
-
- // #define RGB_MATRIX_KEYPRESSES
-
- #define SOLENOID_PIN A14
-
- #endif
|