- /*
- Copyright 2012 Jun Wako <wakojun@gmail.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #ifndef CONFIG_H
- #define CONFIG_H
-
- #include "config_common.h"
-
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0x6060
- #define DEVICE_VER 0x0001
- #define MANUFACTURER LFKeyboards
- #define PRODUCT LFK87
-
- #define DIODE_DIRECTION COL2ROW
-
- #ifdef LFK_TKL_REV_A
- /* RevB Matrix config */
- #define MATRIX_ROWS 6
- #define MATRIX_COLS 17
- #define MATRIX_ROW_PINS {D2, D3, D4, D5, D6, D7 }
- #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\
- F0, F1, F2, F3, C0, C1, C2 }
- #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\
- D0, D1, E0, E1, E2, E3, E4, F4, F5, F6, F7}
- #define RGBLED_NUM 25 // Number of LEDs
- #else
- /* RevC/D Matrix config */
- #define MATRIX_ROWS 7
- #define MATRIX_COLS 16
- #define MATRIX_ROW_PINS {F2, D7, D6, D5, D4, D3, F3}
- #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, C7, C1, C0, E1, E0, C2, C3, C4}
- #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C5, C6, D2, E3, E4, E5, E6, E7, \
- F0, F1, F4, F5, F6, F7}
- #define RGBLED_NUM 24 // Number of LEDs
- #endif
-
- #define AUDIO_VOICES
- #define AUDIO_PIN C6
-
- #define BACKLIGHT_LEVELS 10
- #define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255}
-
- #define RGB_DI_PIN F4 // Have to set it to something to get the ws2812 code to compile
- #define RGBLIGHT_ANIMATIONS
- #define RGBLIGHT_HUE_STEP 10
- #define RGBLIGHT_SAT_STEP 17
- #define RGBLIGHT_VAL_STEP 17
-
- #define TAPPING_TERM 200
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* define if matrix has ghost (lacks anti-ghosting diodes) */
- //#define MATRIX_HAS_GHOST
-
- /* number of backlight levels */
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
- /* control how magic key switches layers */
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
- /* override magic key keymap */
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
- //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
- //#define MAGIC_KEY_HELP1 H
- //#define MAGIC_KEY_HELP2 SLASH
- //#define MAGIC_KEY_DEBUG D
- //#define MAGIC_KEY_DEBUG_MATRIX X
- //#define MAGIC_KEY_DEBUG_KBD K
- //#define MAGIC_KEY_DEBUG_MOUSE M
- //#define MAGIC_KEY_VERSION V
- //#define MAGIC_KEY_STATUS S
- //#define MAGIC_KEY_CONSOLE C
- //#define MAGIC_KEY_LAYER0_ALT1 ESC
- //#define MAGIC_KEY_LAYER0_ALT2 GRAVE
- //#define MAGIC_KEY_LAYER0 0
- //#define MAGIC_KEY_LAYER1 1
- //#define MAGIC_KEY_LAYER2 2
- //#define MAGIC_KEY_LAYER3 3
- //#define MAGIC_KEY_LAYER4 4
- //#define MAGIC_KEY_LAYER5 5
- //#define MAGIC_KEY_LAYER6 6
- //#define MAGIC_KEY_LAYER7 7
- //#define MAGIC_KEY_LAYER8 8
- //#define MAGIC_KEY_LAYER9 9
- //#define MAGIC_KEY_BOOTLOADER PAUSE
- //#define MAGIC_KEY_LOCK CAPS
- //#define MAGIC_KEY_EEPROM E
- //#define MAGIC_KEY_NKRO N
- //#define MAGIC_KEY_SLEEP_LED Z
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
- #endif
|