- /* Copyright 2020 ZSA Technology Labs, Inc <@zsa>
- * Copyright 2020 Jack Humbert <jack.humb@gmail.com>
- * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- // clang-format off
- #define VENDOR_ID 0x3297
- #define PRODUCT_ID 0x1969
- #define MANUFACTURER ZSA Technology Labs
- #define PRODUCT Moonlander Mark I
- #define DEVICE_VER 0x0001
- #define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com"
-
- // clang-format on
-
- /* key matrix size */
- #define MATRIX_ROWS 12
- #define MATRIX_COLS 7
-
- /* PCB default pin-out */
- // #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 }
- // #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 }
-
- // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }
- // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 }
-
- // #define MCP23_LED_R GPB7
- // #define MCP23_LED_G GPB6
- // #define MCP23_LED_B GPA7
-
- #define EEPROM_I2C_24LC128
-
- // Not needed, is default address:
- // #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
-
- /* COL2ROW or ROW2COL */
- #define DIODE_DIRECTION ROW2COL
-
- /* Set 0 if debouncing isn't needed */
- #define DEBOUNCE 5
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- #define NO_ACTION_MACRO
- #define NO_ACTION_FUNCTION
-
- #define DRIVER_ADDR_1 0b1110100
- #define DRIVER_ADDR_2 0b1110111
-
- #define DRIVER_COUNT 2
- #define DRIVER_1_LED_TOTAL 36
- #define DRIVER_2_LED_TOTAL 36
- #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
- #define RGB_MATRIX_CENTER { 125, 26 }
- #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175
- #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
- #define RGB_MATRIX_KEYPRESSES
- #define RGB_DISABLE_WHEN_USB_SUSPENDED true
-
- #define MUSIC_MAP
-
- #define FIRMWARE_VERSION_SIZE 17
- #define DYNAMIC_KEYMAP_EEPROM_ADDR (EECONFIG_SIZE + FIRMWARE_VERSION_SIZE)
- #ifdef EEPROM_I2C
- # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383
- # define DYNAMIC_KEYMAP_LAYER_COUNT 32
- #endif
-
- #define AUDIO_PIN A5
- #define AUDIO_PIN_ALT A4
- #define AUDIO_PIN_ALT_AS_NEGATIVE
|