|
|
- // Copyright 2021 Nick Brassel (@tzarc)
- // SPDX-License-Identifier: GPL-2.0-or-later
-
- #pragma once
-
- ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // Quantum Painter ILI9xxx command opcodes
- #define ILI9XXX_CMD_NOP 0x00 // No operation
- #define ILI9XXX_CMD_RESET 0x01 // Software reset
- #define ILI9XXX_GET_ID_INFO 0x04 // Get ID information
- #define ILI9XXX_GET_STATUS 0x09 // Get status
- #define ILI9XXX_GET_PWR_MODE 0x0A // Get power mode
- #define ILI9XXX_GET_MADCTL 0x0B // Get MADCTL
- #define ILI9XXX_GET_PIX_FMT 0x0C // Get pixel format
- #define ILI9XXX_GET_IMG_FMT 0x0D // Get image format
- #define ILI9XXX_GET_SIG_MODE 0x0E // Get signal mode
- #define ILI9XXX_GET_SELF_DIAG 0x0F // Get self-diagnostics
- #define ILI9XXX_CMD_SLEEP_ON 0x10 // Enter sleep mode
- #define ILI9XXX_CMD_SLEEP_OFF 0x11 // Exist sleep mode
- #define ILI9XXX_CMD_PARTIAL_ON 0x12 // Enter partial mode
- #define ILI9XXX_CMD_PARTIAL_OFF 0x13 // Exit partial mode
- #define ILI9XXX_CMD_INVERT_ON 0x20 // Enter inverted mode
- #define ILI9XXX_CMD_INVERT_OFF 0x21 // Exit inverted mode
- #define ILI9XXX_SET_GAMMA 0x26 // Set gamma params
- #define ILI9XXX_CMD_DISPLAY_OFF 0x28 // Disable display
- #define ILI9XXX_CMD_DISPLAY_ON 0x29 // Enable display
- #define ILI9XXX_SET_COL_ADDR 0x2A // Set column address
- #define ILI9XXX_SET_PAGE_ADDR 0x2B // Set page address
- #define ILI9XXX_SET_MEM 0x2C // Set memory
- #define ILI9XXX_SET_COLOR 0x2D // Set color
- #define ILI9XXX_GET_MEM 0x2E // Get memory
- #define ILI9XXX_SET_PARTIAL_AREA 0x30 // Set partial area
- #define ILI9XXX_SET_VSCROLL 0x33 // Set vertical scroll def
- #define ILI9XXX_CMD_TEARING_ON 0x34 // Tearing line enabled
- #define ILI9XXX_CMD_TEARING_OFF 0x35 // Tearing line disabled
- #define ILI9XXX_SET_MEM_ACS_CTL 0x36 // Set mem access ctl
- #define ILI9XXX_SET_VSCROLL_ADDR 0x37 // Set vscroll start addr
- #define ILI9XXX_CMD_IDLE_OFF 0x38 // Exit idle mode
- #define ILI9XXX_CMD_IDLE_ON 0x39 // Enter idle mode
- #define ILI9XXX_SET_PIX_FMT 0x3A // Set pixel format
- #define ILI9XXX_SET_MEM_CONT 0x3C // Set memory continue
- #define ILI9XXX_GET_MEM_CONT 0x3E // Get memory continue
- #define ILI9XXX_SET_TEAR_SCANLINE 0x44 // Set tearing scanline
- #define ILI9XXX_GET_TEAR_SCANLINE 0x45 // Get tearing scanline
- #define ILI9XXX_SET_BRIGHTNESS 0x51 // Set brightness
- #define ILI9XXX_GET_BRIGHTNESS 0x52 // Get brightness
- #define ILI9XXX_SET_DISPLAY_CTL 0x53 // Set display ctl
- #define ILI9XXX_GET_DISPLAY_CTL 0x54 // Get display ctl
- #define ILI9XXX_SET_CABC 0x55 // Set CABC
- #define ILI9XXX_GET_CABC 0x56 // Get CABC
- #define ILI9XXX_SET_CABC_MIN 0x5E // Set CABC min
- #define ILI9XXX_GET_CABC_MIN 0x5F // Set CABC max
- #define ILI9XXX_GET_ID1 0xDA // Get ID1
- #define ILI9XXX_GET_ID2 0xDB // Get ID2
- #define ILI9XXX_GET_ID3 0xDC // Get ID3
- #define ILI9XXX_SET_RGB_IF_SIG_CTL 0xB0 // RGB IF signal ctl
- #define ILI9XXX_SET_FRAME_CTL_NORMAL 0xB1 // Set frame ctl (normal)
- #define ILI9XXX_SET_FRAME_CTL_IDLE 0xB2 // Set frame ctl (idle)
- #define ILI9XXX_SET_FRAME_CTL_PARTIAL 0xB3 // Set frame ctl (partial)
- #define ILI9XXX_SET_INVERSION_CTL 0xB4 // Set inversion ctl
- #define ILI9XXX_SET_BLANKING_PORCH_CTL 0xB5 // Set blanking porch ctl
- #define ILI9XXX_SET_FUNCTION_CTL 0xB6 // Set function ctl
- #define ILI9XXX_SET_ENTRY_MODE 0xB7 // Set entry mode
- #define ILI9XXX_SET_LIGHT_CTL_1 0xB8 // Set backlight ctl 1
- #define ILI9XXX_SET_LIGHT_CTL_2 0xB9 // Set backlight ctl 2
- #define ILI9XXX_SET_LIGHT_CTL_3 0xBA // Set backlight ctl 3
- #define ILI9XXX_SET_LIGHT_CTL_4 0xBB // Set backlight ctl 4
- #define ILI9XXX_SET_LIGHT_CTL_5 0xBC // Set backlight ctl 5
- #define ILI9XXX_SET_LIGHT_CTL_7 0xBE // Set backlight ctl 7
- #define ILI9XXX_SET_LIGHT_CTL_8 0xBF // Set backlight ctl 8
- #define ILI9XXX_SET_POWER_CTL_1 0xC0 // Set power ctl 1
- #define ILI9XXX_SET_POWER_CTL_2 0xC1 // Set power ctl 2
- #define ILI9XXX_SET_VCOM_CTL_1 0xC5 // Set VCOM ctl 1
- #define ILI9XXX_SET_VCOM_CTL_2 0xC7 // Set VCOM ctl 2
- #define ILI9XXX_POWER_CTL_A 0xCB // Set power control A
- #define ILI9XXX_POWER_CTL_B 0xCF // Set power control B
- #define ILI9XXX_DRV_TIMING_CTL_A 0xE8 // Set driver timing control A
- #define ILI9XXX_DRV_TIMING_CTL_B 0xEA // Set driver timing control B
- #define ILI9XXX_POWER_ON_SEQ_CTL 0xED // Set Power on sequence control
- #define ILI9XXX_SET_NVMEM 0xD0 // Set NVMEM data
- #define ILI9XXX_GET_NVMEM_KEY 0xD1 // Get NVMEM protect key
- #define ILI9XXX_GET_NVMEM_STATUS 0xD2 // Get NVMEM status
- #define ILI9XXX_GET_ID4 0xD3 // Get ID4
- #define ILI9XXX_SET_PGAMMA 0xE0 // Set positive gamma
- #define ILI9XXX_SET_NGAMMA 0xE1 // Set negative gamma
- #define ILI9XXX_SET_DGAMMA_CTL_1 0xE2 // Set digital gamma ctl 1
- #define ILI9XXX_SET_DGAMMA_CTL_2 0xE3 // Set digital gamma ctl 2
- #define ILI9XXX_ENABLE_3_GAMMA 0xF2 // Enable 3 gamma
- #define ILI9XXX_SET_IF_CTL 0xF6 // Set interface control
- #define ILI9XXX_SET_PUMP_RATIO_CTL 0xF7 // Set pump ratio control
-
- ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // MADCTL Flags
- #define ILI9XXX_MADCTL_MY 0b10000000
- #define ILI9XXX_MADCTL_MX 0b01000000
- #define ILI9XXX_MADCTL_MV 0b00100000
- #define ILI9XXX_MADCTL_ML 0b00010000
- #define ILI9XXX_MADCTL_RGB 0b00000000
- #define ILI9XXX_MADCTL_BGR 0b00001000
- #define ILI9XXX_MADCTL_MH 0b00000100
|
