|
|
- # project specific files
- SRC = matrix.c \
- led.c
-
- ## chip/board settings
- # the next two should match the directories in
- # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
- MCU_FAMILY = STM32
- MCU_SERIES = STM32F0xx
- # linker script to use
- # it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
- # or <this_dir>/ld/
- MCU_LDSCRIPT = STM32F072xB
- # startup code to use
- # is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
- MCU_STARTUP = stm32f0xx
- # it should exist either in <chibios>/os/hal/boards/
- # or <this_dir>/boards
- BOARD = ST_STM32F072B_DISCOVERY
- # Cortex version
- # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
- MCU = cortex-m0
- # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
- ARMV = 6
- # If you want to be able to jump to bootloader from firmware on STM32 MCUs,
- # set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
- # ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
- # a custom board definition that you plan to reuse).
- # If you're not setting it here, leave it commented out.
- # It is chip dependent, the correct number can be looked up here (page 175):
- # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- # This also requires a patch to chibios:
- # <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
- # Build Options
- # comment out to disable the options.
- #
|