You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

122 lines
4.3 KiB

2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
3 years ago
  1. /* Copyright 2020 Rodolphe Belouin
  2. *
  3. * This program is free software: you can redistribute it and/or modify
  4. * it under the terms of the GNU General Public License as published by
  5. * the Free Software Foundation, either version 2 of the License, or
  6. * (at your option) any later version.
  7. *
  8. * This program is distributed in the hope that it will be useful,
  9. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. * GNU General Public License for more details.
  12. *
  13. * You should have received a copy of the GNU General Public License
  14. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  15. */
  16. #pragma once
  17. #include <stdbool.h>
  18. #include "debug.h"
  19. #include "timer.h"
  20. // Maximum number of steps: 256
  21. #ifndef SEQUENCER_STEPS
  22. # define SEQUENCER_STEPS 16
  23. #endif
  24. // Maximum number of tracks: 8
  25. #ifndef SEQUENCER_TRACKS
  26. # define SEQUENCER_TRACKS 8
  27. #endif
  28. #ifndef SEQUENCER_TRACK_THROTTLE
  29. # define SEQUENCER_TRACK_THROTTLE 3
  30. #endif
  31. #ifndef SEQUENCER_PHASE_RELEASE_TIMEOUT
  32. # define SEQUENCER_PHASE_RELEASE_TIMEOUT 30
  33. #endif
  34. /**
  35. * Make sure that the items of this enumeration follow the powers of 2, separated by a ternary variant.
  36. * Check the implementation of `get_step_duration` for further explanation.
  37. */
  38. typedef enum { SQ_RES_2, SQ_RES_2T, SQ_RES_4, SQ_RES_4T, SQ_RES_8, SQ_RES_8T, SQ_RES_16, SQ_RES_16T, SQ_RES_32, SEQUENCER_RESOLUTIONS } sequencer_resolution_t;
  39. typedef struct {
  40. bool enabled;
  41. uint8_t steps[SEQUENCER_STEPS];
  42. uint16_t track_notes[SEQUENCER_TRACKS];
  43. uint8_t tempo; // Is a maximum tempo of 255 reasonable?
  44. sequencer_resolution_t resolution;
  45. } sequencer_config_t;
  46. /**
  47. * Because Digital Audio Workstations get overwhelmed when too many MIDI signals are sent concurrently,
  48. * We use a "phase" state machine to delay some of the events.
  49. */
  50. typedef enum sequencer_phase_t {
  51. SEQUENCER_PHASE_ATTACK, // t=0ms, send the MIDI note on signal
  52. SEQUENCER_PHASE_RELEASE, // t=SEQUENCER_PHASE_RELEASE_TIMEOUT ms, send the MIDI note off signal
  53. SEQUENCER_PHASE_PAUSE // t=step duration ms, loop
  54. } sequencer_phase_t;
  55. typedef struct {
  56. uint8_t active_tracks;
  57. uint8_t current_track;
  58. uint8_t current_step;
  59. uint16_t timer;
  60. sequencer_phase_t phase;
  61. } sequencer_state_t;
  62. extern sequencer_config_t sequencer_config;
  63. // We expose the internal state to make the feature more "unit-testable"
  64. extern sequencer_state_t sequencer_internal_state;
  65. bool is_sequencer_on(void);
  66. void sequencer_toggle(void);
  67. void sequencer_on(void);
  68. void sequencer_off(void);
  69. void sequencer_set_track_notes(const uint16_t track_notes[SEQUENCER_TRACKS]);
  70. bool is_sequencer_track_active(uint8_t track);
  71. void sequencer_set_track_activation(uint8_t track, bool value);
  72. void sequencer_toggle_track_activation(uint8_t track);
  73. void sequencer_toggle_single_active_track(uint8_t track);
  74. #define sequencer_activate_track(track) sequencer_set_track_activation(track, true)
  75. #define sequencer_deactivate_track(track) sequencer_set_track_activation(track, false)
  76. bool is_sequencer_step_on(uint8_t step);
  77. bool is_sequencer_step_on_for_track(uint8_t step, uint8_t track);
  78. void sequencer_set_step(uint8_t step, bool value);
  79. void sequencer_toggle_step(uint8_t step);
  80. void sequencer_set_all_steps(bool value);
  81. #define sequencer_set_step_on(step) sequencer_set_step(step, true)
  82. #define sequencer_set_step_off(step) sequencer_set_step(step, false)
  83. #define sequencer_set_all_steps_on() sequencer_set_all_steps(true)
  84. #define sequencer_set_all_steps_off() sequencer_set_all_steps(false)
  85. uint8_t sequencer_get_tempo(void);
  86. void sequencer_set_tempo(uint8_t tempo);
  87. void sequencer_increase_tempo(void);
  88. void sequencer_decrease_tempo(void);
  89. sequencer_resolution_t sequencer_get_resolution(void);
  90. void sequencer_set_resolution(sequencer_resolution_t resolution);
  91. void sequencer_increase_resolution(void);
  92. void sequencer_decrease_resolution(void);
  93. uint8_t sequencer_get_current_step(void);
  94. uint16_t sequencer_get_beat_duration(void);
  95. uint16_t sequencer_get_step_duration(void);
  96. uint16_t get_beat_duration(uint8_t tempo);
  97. uint16_t get_step_duration(uint8_t tempo, sequencer_resolution_t resolution);
  98. void sequencer_task(void);