You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

247 lines
8.2 KiB

2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
3 years ago
  1. /* Copyright 2018 James Laird-Wah
  2. * Copyright 2019 Clueboard
  3. *
  4. * This program is free software: you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License as published by
  6. * the Free Software Foundation, either version 2 of the License, or
  7. * (at your option) any later version.
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  16. */
  17. #include "led_matrix.h"
  18. /* Each driver needs to define a struct:
  19. *
  20. * const led_matrix_driver_t led_matrix_driver;
  21. *
  22. * All members must be provided. Keyboard custom drivers must define this
  23. * in their own files.
  24. */
  25. #if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FLCOMMON) || defined(CKLED2001)
  26. # include "i2c_master.h"
  27. static void init(void) {
  28. i2c_init();
  29. # if defined(IS31FL3731)
  30. IS31FL3731_init(LED_DRIVER_ADDR_1);
  31. # if defined(LED_DRIVER_ADDR_2)
  32. IS31FL3731_init(LED_DRIVER_ADDR_2);
  33. # if defined(LED_DRIVER_ADDR_3)
  34. IS31FL3731_init(LED_DRIVER_ADDR_3);
  35. # if defined(LED_DRIVER_ADDR_4)
  36. IS31FL3731_init(LED_DRIVER_ADDR_4);
  37. # endif
  38. # endif
  39. # endif
  40. # elif defined(IS31FL3733)
  41. # if !defined(LED_DRIVER_SYNC_1)
  42. # define LED_DRIVER_SYNC_1 0
  43. # endif
  44. IS31FL3733_init(LED_DRIVER_ADDR_1, LED_DRIVER_SYNC_1);
  45. # if defined(LED_DRIVER_ADDR_2)
  46. # if !defined(LED_DRIVER_SYNC_2)
  47. # define LED_DRIVER_SYNC_2 0
  48. # endif
  49. IS31FL3733_init(LED_DRIVER_ADDR_2, LED_DRIVER_SYNC_2);
  50. # if defined(LED_DRIVER_ADDR_3)
  51. # if !defined(LED_DRIVER_SYNC_3)
  52. # define LED_DRIVER_SYNC_3 0
  53. # endif
  54. IS31FL3733_init(LED_DRIVER_ADDR_3, LED_DRIVER_SYNC_3);
  55. # if defined(LED_DRIVER_ADDR_4)
  56. # if !defined(LED_DRIVER_SYNC_4)
  57. # define LED_DRIVER_SYNC_4 0
  58. # endif
  59. IS31FL3733_init(LED_DRIVER_ADDR_4, LED_DRIVER_SYNC_4);
  60. # endif
  61. # endif
  62. # endif
  63. # elif defined(IS31FLCOMMON)
  64. IS31FL_common_init(DRIVER_ADDR_1, ISSI_SSR_1);
  65. # if defined(LED_DRIVER_ADDR_2)
  66. IS31FL_common_init(DRIVER_ADDR_2, ISSI_SSR_2);
  67. # if defined(LED_DRIVER_ADDR_3)
  68. IS31FL_common_init(DRIVER_ADDR_3, ISSI_SSR_3);
  69. # if defined(LED_DRIVER_ADDR_4)
  70. IS31FL_common_init(DRIVER_ADDR_4, ISSI_SSR_4);
  71. # endif
  72. # endif
  73. # endif
  74. # elif defined(CKLED2001)
  75. # if defined(LED_DRIVER_SHUTDOWN_PIN)
  76. setPinOutput(LED_DRIVER_SHUTDOWN_PIN);
  77. writePinHigh(LED_DRIVER_SHUTDOWN_PIN);
  78. # endif
  79. CKLED2001_init(DRIVER_ADDR_1);
  80. # if defined(DRIVER_ADDR_2)
  81. CKLED2001_init(DRIVER_ADDR_2);
  82. # if defined(DRIVER_ADDR_3)
  83. CKLED2001_init(DRIVER_ADDR_3);
  84. # if defined(DRIVER_ADDR_4)
  85. CKLED2001_init(DRIVER_ADDR_4);
  86. # endif
  87. # endif
  88. # endif
  89. # endif
  90. for (int index = 0; index < LED_MATRIX_LED_COUNT; index++) {
  91. # if defined(IS31FL3731)
  92. IS31FL3731_set_led_control_register(index, true);
  93. # elif defined(IS31FL3733)
  94. IS31FL3733_set_led_control_register(index, true);
  95. # elif defined(IS31FLCOMMON)
  96. IS31FL_simple_set_scaling_buffer(index, true);
  97. # elif defined(CKLED2001)
  98. CKLED2001_set_led_control_register(index, true);
  99. # endif
  100. }
  101. // This actually updates the LED drivers
  102. # if defined(IS31FL3731)
  103. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
  104. # if defined(LED_DRIVER_ADDR_2)
  105. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
  106. # if defined(LED_DRIVER_ADDR_3)
  107. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
  108. # if defined(LED_DRIVER_ADDR_4)
  109. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
  110. # endif
  111. # endif
  112. # endif
  113. # elif defined(IS31FL3733)
  114. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
  115. # if defined(LED_DRIVER_ADDR_2)
  116. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
  117. # if defined(LED_DRIVER_ADDR_3)
  118. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
  119. # if defined(LED_DRIVER_ADDR_4)
  120. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
  121. # endif
  122. # endif
  123. # endif
  124. # elif defined(IS31FLCOMMON)
  125. # ifdef ISSI_MANUAL_SCALING
  126. IS31FL_set_manual_scaling_buffer();
  127. # endif
  128. IS31FL_common_update_scaling_register(DRIVER_ADDR_1, 0);
  129. # if defined(LED_DRIVER_ADDR_2)
  130. IS31FL_common_update_scaling_register(DRIVER_ADDR_2, 1);
  131. # if defined(LED_DRIVER_ADDR_3)
  132. IS31FL_common_update_scaling_register(DRIVER_ADDR_3, 2);
  133. # if defined(LED_DRIVER_ADDR_4)
  134. IS31FL_common_update_scaling_register(DRIVER_ADDR_4, 3);
  135. # endif
  136. # endif
  137. # endif
  138. # elif defined(CKLED2001)
  139. CKLED2001_update_led_control_registers(DRIVER_ADDR_1, 0);
  140. # if defined(DRIVER_ADDR_2)
  141. CKLED2001_update_led_control_registers(DRIVER_ADDR_2, 1);
  142. # if defined(DRIVER_ADDR_3)
  143. CKLED2001_update_led_control_registers(DRIVER_ADDR_3, 2);
  144. # if defined(DRIVER_ADDR_4)
  145. CKLED2001_update_led_control_registers(DRIVER_ADDR_4, 3);
  146. # endif
  147. # endif
  148. # endif
  149. # endif
  150. }
  151. # if defined(IS31FL3731)
  152. static void flush(void) {
  153. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
  154. # if defined(LED_DRIVER_ADDR_2)
  155. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
  156. # if defined(LED_DRIVER_ADDR_3)
  157. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
  158. # if defined(LED_DRIVER_ADDR_4)
  159. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
  160. # endif
  161. # endif
  162. # endif
  163. }
  164. const led_matrix_driver_t led_matrix_driver = {
  165. .init = init,
  166. .flush = flush,
  167. .set_value = IS31FL3731_set_value,
  168. .set_value_all = IS31FL3731_set_value_all,
  169. };
  170. # elif defined(IS31FL3733)
  171. static void flush(void) {
  172. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
  173. # if defined(LED_DRIVER_ADDR_2)
  174. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
  175. # if defined(LED_DRIVER_ADDR_3)
  176. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
  177. # if defined(LED_DRIVER_ADDR_4)
  178. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
  179. # endif
  180. # endif
  181. # endif
  182. }
  183. const led_matrix_driver_t led_matrix_driver = {
  184. .init = init,
  185. .flush = flush,
  186. .set_value = IS31FL3733_set_value,
  187. .set_value_all = IS31FL3733_set_value_all,
  188. };
  189. # elif defined(IS31FLCOMMON)
  190. static void flush(void) {
  191. IS31FL_common_update_pwm_register(DRIVER_ADDR_1, 0);
  192. # if defined(LED_DRIVER_ADDR_2)
  193. IS31FL_common_update_pwm_register(DRIVER_ADDR_2, 1);
  194. # if defined(LED_DRIVER_ADDR_3)
  195. IS31FL_common_update_pwm_register(DRIVER_ADDR_3, 2);
  196. # if defined(LED_DRIVER_ADDR_4)
  197. IS31FL_common_update_pwm_register(DRIVER_ADDR_4, 3);
  198. # endif
  199. # endif
  200. # endif
  201. }
  202. const led_matrix_driver_t led_matrix_driver = {
  203. .init = init,
  204. .flush = flush,
  205. .set_value = IS31FL_simple_set_brightness,
  206. .set_value_all = IS31FL_simple_set_brigntness_all,
  207. };
  208. # elif defined(CKLED2001)
  209. static void flush(void) {
  210. CKLED2001_update_pwm_buffers(DRIVER_ADDR_1, 0);
  211. # if defined(DRIVER_ADDR_2)
  212. CKLED2001_update_pwm_buffers(DRIVER_ADDR_2, 1);
  213. # if defined(DRIVER_ADDR_3)
  214. CKLED2001_update_pwm_buffers(DRIVER_ADDR_3, 2);
  215. # if defined(DRIVER_ADDR_4)
  216. CKLED2001_update_pwm_buffers(DRIVER_ADDR_4, 3);
  217. # endif
  218. # endif
  219. # endif
  220. }
  221. const led_matrix_driver_t led_matrix_driver = {
  222. .init = init,
  223. .flush = flush,
  224. .set_value = CKLED2001_set_value,
  225. .set_value_all = CKLED2001_set_value_all,
  226. };
  227. # endif
  228. #endif