-
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xF7E0
- #define PRODUCT_ID 0x0412
- #define DEVICE_VER 0x0000
- #define MANUFACTURER EDI/SCI
- #define PRODUCT 412 64 Model 00
-
- /* key matrix size */
- #define MATRIX_ROWS 8
- #define MATRIX_COLS 8
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { D3, F4, F5, F6, F7, B1, B3, B2 }
- #define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
- #define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
-
- /* COL2ROW, ROW2COL*/
- #define DIODE_DIRECTION COL2ROW
-
- // #define BACKLIGHT_PIN C7
- // #define BACKLIGHT_BREATHING
- // #define BACKLIGHT_LEVELS 3
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* define if matrix has ghost (lacks anti-ghosting diodes) */
- //#define MATRIX_HAS_GHOST
-
- /* number of backlight levels */
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
- // #define GRAVE_ESC_CTRL_OVERRIDE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
- //#define NO_ACTION_MACRO
- //#define NO_ACTION_FUNCTION
-
|