- /*
- Copyright 2019 Thomas Baart
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0xF75B
- #define DEVICE_VER 0x0001
- #define MANUFACTURER splitkb
- #define PRODUCT Zima
-
- /* key matrix size */
- #define MATRIX_ROWS 4
- #define MATRIX_COLS 3
-
- /*
- * Keyboard Matrix Assignments
- */
- #define DIRECT_PINS { \
- { C6, D6, D5 }, \
- { C7, F7, D4 }, \
- { E6, F5, F6 }, \
- { F0, F1, F4 } \
- }
-
- #define UNUSED_PINS
-
- #define ENCODERS_PAD_A { B4 }
- #define ENCODERS_PAD_B { D7 }
-
- // #define QMK_ESC_OUTPUT B7
- // #define QMK_ESC_INPUT C6
- // #define QMK_SPEAKER B6
-
- #define AUDIO_PIN B6
- #define AUDIO_CLICKY
- #define NO_MUSIC_MODE
-
- #define RGB_DI_PIN B5
- #define RGBLED_NUM 5
- #define RGBLIGHT_HUE_STEP 8
- #define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- #define RGBLIGHT_EFFECT_BREATHING
- #define RGBLIGHT_EFFECT_RAINBOW_MOOD
- #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- #define RGBLIGHT_EFFECT_STATIC_GRADIENT
- #define RGBLIGHT_EFFECT_TWINKLE
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* define if matrix has ghost (lacks anti-ghosting diodes) */
- //#define MATRIX_HAS_GHOST
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- // #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- // #define LOCKING_RESYNC_ENABLE
-
- #define FB_ERM_LRA 0
- #define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
- #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
-
- /* Please refer to your datasheet for the optimal setting for your specific motor. */
- #define RATED_VOLTAGE 3
- #define V_PEAK 5
-
- #define DRV_GREETING alert_750ms
- #define DRV_MODE_DEFAULT buzz
- // EC11K encoders have a different resolution than other EC11 encoders.
- // When using the default resolution of 4, if you notice your encoder skipping
- // every other tick, lower the resolution to 2.
- #define ENCODER_RESOLUTION 2
|