- /*
- Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
- #pragma once
-
- #include "config_common.h"
-
- /* USB Device descriptor parameter */
- #define VENDOR_ID 0x594D // "YM"
- #define PRODUCT_ID 0x5021 // "P" 21
- #define DEVICE_VER 0x0200
- #define MANUFACTURER YMDK
- #define PRODUCT NP21
-
- /* key matrix size */
- #define MATRIX_ROWS 4
- #define MATRIX_COLS 6
-
- /*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
- #define MATRIX_ROW_PINS { B0, B1, B2, B3 }
- #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5 }
-
- /* COL2ROW, ROW2COL */
- #define DIODE_DIRECTION COL2ROW
-
- #define LED_NUM_LOCK_PIN D0
-
- #define BACKLIGHT_PIN D4
- #define BACKLIGHT_LEVELS 12
- #define BACKLIGHT_BREATHING
-
- #define RGBLED_NUM 5
- //#define RGBLIGHT_HUE_STEP 8
- //#define RGBLIGHT_SAT_STEP 8
- //#define RGBLIGHT_VAL_STEP 8
- //#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
- //#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- /*== all animations enable ==*/
- #define RGBLIGHT_ANIMATIONS
- /*== or choose animations ==*/
- //#define RGBLIGHT_EFFECT_BREATHING
- //#define RGBLIGHT_EFFECT_RAINBOW_MOOD
- //#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
- //#define RGBLIGHT_EFFECT_SNAKE
- //#define RGBLIGHT_EFFECT_KNIGHT
- //#define RGBLIGHT_EFFECT_CHRISTMAS
- //#define RGBLIGHT_EFFECT_STATIC_GRADIENT
- //#define RGBLIGHT_EFFECT_RGB_TEST
- //#define RGBLIGHT_EFFECT_ALTERNATING
- /*== customize breathing effect ==*/
- /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
- //#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
- /*==== use exp() and sin() ====*/
- //#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
- //#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-
- /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
- #define DEBOUNCE 5
-
- /* define if matrix has ghost (lacks anti-ghosting diodes) */
- //#define MATRIX_HAS_GHOST
-
- /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
- #define LOCKING_SUPPORT_ENABLE
- /* Locking resynchronize hack */
- #define LOCKING_RESYNC_ENABLE
-
- /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
- //#define GRAVE_ESC_CTRL_OVERRIDE
-
- /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
- //#define FORCE_NKRO
-
- /*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
- /* disable debug print */
- //#define NO_DEBUG
-
- /* disable print */
- //#define NO_PRINT
-
- /* disable action features */
- //#define NO_ACTION_LAYER
- //#define NO_ACTION_TAPPING
- //#define NO_ACTION_ONESHOT
-
- /* disable these deprecated features by default */
- #define NO_ACTION_MACRO
- #define NO_ACTION_FUNCTION
-
- /* Bootmagic Lite key configuration */
- //#define BOOTMAGIC_LITE_ROW 0
- //#define BOOTMAGIC_LITE_COLUMN 0
-
- #define USB_MAX_POWER_CONSUMPTION 100
|