You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

198 lines
6.6 KiB

2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
3 years ago
  1. /* Copyright 2018 James Laird-Wah
  2. * Copyright 2019 Clueboard
  3. *
  4. * This program is free software: you can redistribute it and/or modify
  5. * it under the terms of the GNU General Public License as published by
  6. * the Free Software Foundation, either version 2 of the License, or
  7. * (at your option) any later version.
  8. *
  9. * This program is distributed in the hope that it will be useful,
  10. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. * GNU General Public License for more details.
  13. *
  14. * You should have received a copy of the GNU General Public License
  15. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  16. */
  17. #include "led_matrix.h"
  18. /* Each driver needs to define a struct:
  19. *
  20. * const led_matrix_driver_t led_matrix_driver;
  21. *
  22. * All members must be provided. Keyboard custom drivers must define this
  23. * in their own files.
  24. */
  25. #if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FLCOMMON)
  26. # include "i2c_master.h"
  27. static void init(void) {
  28. i2c_init();
  29. # if defined(IS31FL3731)
  30. IS31FL3731_init(LED_DRIVER_ADDR_1);
  31. # if defined(LED_DRIVER_ADDR_2)
  32. IS31FL3731_init(LED_DRIVER_ADDR_2);
  33. # if defined(LED_DRIVER_ADDR_3)
  34. IS31FL3731_init(LED_DRIVER_ADDR_3);
  35. # if defined(LED_DRIVER_ADDR_4)
  36. IS31FL3731_init(LED_DRIVER_ADDR_4);
  37. # endif
  38. # endif
  39. # endif
  40. # elif defined(IS31FL3733)
  41. # if !defined(LED_DRIVER_SYNC_1)
  42. # define LED_DRIVER_SYNC_1 0
  43. # endif
  44. IS31FL3733_init(LED_DRIVER_ADDR_1, LED_DRIVER_SYNC_1);
  45. # if defined(LED_DRIVER_ADDR_2)
  46. # if !defined(LED_DRIVER_SYNC_2)
  47. # define LED_DRIVER_SYNC_2 0
  48. # endif
  49. IS31FL3733_init(LED_DRIVER_ADDR_2, LED_DRIVER_SYNC_2);
  50. # if defined(LED_DRIVER_ADDR_3)
  51. # if !defined(LED_DRIVER_SYNC_3)
  52. # define LED_DRIVER_SYNC_3 0
  53. # endif
  54. IS31FL3733_init(LED_DRIVER_ADDR_3, LED_DRIVER_SYNC_3);
  55. # if defined(LED_DRIVER_ADDR_4)
  56. # if !defined(LED_DRIVER_SYNC_4)
  57. # define LED_DRIVER_SYNC_4 0
  58. # endif
  59. IS31FL3733_init(LED_DRIVER_ADDR_4, LED_DRIVER_SYNC_4);
  60. # endif
  61. # endif
  62. # endif
  63. # elif defined(IS31FLCOMMON)
  64. IS31FL_common_init(DRIVER_ADDR_1, ISSI_SSR_1);
  65. # if defined(LED_DRIVER_ADDR_2)
  66. IS31FL_common_init(DRIVER_ADDR_2, ISSI_SSR_2);
  67. # if defined(LED_DRIVER_ADDR_3)
  68. IS31FL_common_init(DRIVER_ADDR_3, ISSI_SSR_3);
  69. # if defined(LED_DRIVER_ADDR_4)
  70. IS31FL_common_init(DRIVER_ADDR_4, ISSI_SSR_4);
  71. # endif
  72. # endif
  73. # endif
  74. # endif
  75. for (int index = 0; index < DRIVER_LED_TOTAL; index++) {
  76. # if defined(IS31FL3731)
  77. IS31FL3731_set_led_control_register(index, true);
  78. # elif defined(IS31FL3733)
  79. IS31FL3733_set_led_control_register(index, true);
  80. # elif defined(IS31FLCOMMON)
  81. IS31FL_simple_set_scaling_buffer(index, true);
  82. # endif
  83. }
  84. // This actually updates the LED drivers
  85. # if defined(IS31FL3731)
  86. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
  87. # if defined(LED_DRIVER_ADDR_2)
  88. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
  89. # if defined(LED_DRIVER_ADDR_3)
  90. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
  91. # if defined(LED_DRIVER_ADDR_4)
  92. IS31FL3731_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
  93. # endif
  94. # endif
  95. # endif
  96. # elif defined(IS31FL3733)
  97. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
  98. # if defined(LED_DRIVER_ADDR_2)
  99. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
  100. # if defined(LED_DRIVER_ADDR_3)
  101. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
  102. # if defined(LED_DRIVER_ADDR_4)
  103. IS31FL3733_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
  104. # endif
  105. # endif
  106. # endif
  107. # elif defined(IS31FLCOMMON)
  108. # ifdef ISSI_MANUAL_SCALING
  109. IS31FL_set_manual_scaling_buffer();
  110. # endif
  111. IS31FL_common_update_scaling_register(DRIVER_ADDR_1, 0);
  112. # if defined(LED_DRIVER_ADDR_2)
  113. IS31FL_common_update_scaling_register(DRIVER_ADDR_2, 1);
  114. # if defined(LED_DRIVER_ADDR_3)
  115. IS31FL_common_update_scaling_register(DRIVER_ADDR_3, 2);
  116. # if defined(LED_DRIVER_ADDR_4)
  117. IS31FL_common_update_scaling_register(DRIVER_ADDR_4, 3);
  118. # endif
  119. # endif
  120. # endif
  121. # endif
  122. }
  123. # if defined(IS31FL3731)
  124. static void flush(void) {
  125. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
  126. # if defined(LED_DRIVER_ADDR_2)
  127. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
  128. # if defined(LED_DRIVER_ADDR_3)
  129. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
  130. # if defined(LED_DRIVER_ADDR_4)
  131. IS31FL3731_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
  132. # endif
  133. # endif
  134. # endif
  135. }
  136. const led_matrix_driver_t led_matrix_driver = {
  137. .init = init,
  138. .flush = flush,
  139. .set_value = IS31FL3731_set_value,
  140. .set_value_all = IS31FL3731_set_value_all,
  141. };
  142. # elif defined(IS31FL3733)
  143. static void flush(void) {
  144. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
  145. # if defined(LED_DRIVER_ADDR_2)
  146. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
  147. # if defined(LED_DRIVER_ADDR_3)
  148. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
  149. # if defined(LED_DRIVER_ADDR_4)
  150. IS31FL3733_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
  151. # endif
  152. # endif
  153. # endif
  154. }
  155. const led_matrix_driver_t led_matrix_driver = {
  156. .init = init,
  157. .flush = flush,
  158. .set_value = IS31FL3733_set_value,
  159. .set_value_all = IS31FL3733_set_value_all,
  160. };
  161. # elif defined(IS31FLCOMMON)
  162. static void flush(void) {
  163. IS31FL_common_update_pwm_register(DRIVER_ADDR_1, 0);
  164. # if defined(LED_DRIVER_ADDR_2)
  165. IS31FL_common_update_pwm_register(DRIVER_ADDR_2, 1);
  166. # if defined(LED_DRIVER_ADDR_3)
  167. IS31FL_common_update_pwm_register(DRIVER_ADDR_3, 2);
  168. # if defined(LED_DRIVER_ADDR_4)
  169. IS31FL_common_update_pwm_register(DRIVER_ADDR_4, 3);
  170. # endif
  171. # endif
  172. # endif
  173. }
  174. const led_matrix_driver_t led_matrix_driver = {
  175. .init = init,
  176. .flush = flush,
  177. .set_value = IS31FL_simple_set_brightness,
  178. .set_value_all = IS31FL_simple_set_brigntness_all,
  179. };
  180. # endif
  181. #endif