@ -0,0 +1,3 @@ | |||||
ifndef MAKEFILE_INCLUDED | |||||
include ../../Makefile | |||||
endif |
@ -0,0 +1 @@ | |||||
#include "atreus62.h" |
@ -0,0 +1,26 @@ | |||||
#ifndef ATREUS62_H | |||||
#define ATREUS62_H | |||||
#include "quantum.h" | |||||
void promicro_bootloader_jmp(bool program); | |||||
// This a shortcut to help you visually see your layout. | |||||
// The first section contains all of the arguements | |||||
// The second converts the arguments into a two-dimensional array | |||||
#define KEYMAP( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ | |||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ | |||||
) \ | |||||
{ \ | |||||
{ k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ | |||||
{ k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ | |||||
{ k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ | |||||
{ k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ | |||||
{ k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ | |||||
} | |||||
#endif |
@ -0,0 +1,83 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x6062 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Profet | |||||
#define PRODUCT Atreus62 | |||||
#define DESCRIPTION q.m.k. keyboard firmware for Atreus62 | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 13 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } | |||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } | |||||
#define CATERINA_BOOTLOADER | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION ROW2COL | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* number of backlight levels */ | |||||
// #define BACKLIGHT_LEVELS 3 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
// #define NO_DEBUG | |||||
/* disable print */ | |||||
// #define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#endif |
@ -0,0 +1,71 @@ | |||||
// this is the style you want to emulate. | |||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||||
#include "atreus62.h" | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _DEFAULT 0 | |||||
#define _NAV 1 | |||||
#define _RESET 2 | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_DEFAULT] = { /* qwerty */ | |||||
{ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS }, | |||||
{ KC_BSLS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC }, | |||||
{ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, | |||||
{ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LBRC }, | |||||
{ KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI } | |||||
}, | |||||
[_NAV] = { | |||||
{ TO(_DEFAULT), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS }, | |||||
{ TO(_RESET), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } | |||||
}, | |||||
[_RESET] = { | |||||
{ TO(_DEFAULT), KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, | |||||
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, | |||||
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, | |||||
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, | |||||
{ KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , RESET } | |||||
} | |||||
/* | |||||
[_TRNS] = { | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, | |||||
{ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } | |||||
}, | |||||
*/ | |||||
}; | |||||
const uint16_t PROGMEM fn_actions[] = { | |||||
}; | |||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||||
{ | |||||
// MACRODOWN only works in this function | |||||
switch (id) { | |||||
case 0: | |||||
if (record->event.pressed) { | |||||
register_code(KC_RSFT); | |||||
} | |||||
else { | |||||
unregister_code(KC_RSFT); | |||||
} | |||||
break; | |||||
} | |||||
return MACRO_NONE; | |||||
}; |
@ -0,0 +1,362 @@ | |||||
/* | |||||
pins_arduino.h - Pin definition functions for Arduino | |||||
Part of Arduino - http://www.arduino.cc/ | |||||
Copyright (c) 2007 David A. Mellis | |||||
This library is free software; you can redistribute it and/or | |||||
modify it under the terms of the GNU Lesser General Public | |||||
License as published by the Free Software Foundation; either | |||||
version 2.1 of the License, or (at your option) any later version. | |||||
This library is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |||||
Lesser General Public License for more details. | |||||
You should have received a copy of the GNU Lesser General | |||||
Public License along with this library; if not, write to the | |||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330, | |||||
Boston, MA 02111-1307 USA | |||||
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ | |||||
*/ | |||||
#ifndef Pins_Arduino_h | |||||
#define Pins_Arduino_h | |||||
#include <avr/pgmspace.h> | |||||
// Workaround for wrong definitions in "iom32u4.h". | |||||
// This should be fixed in the AVR toolchain. | |||||
#undef UHCON | |||||
#undef UHINT | |||||
#undef UHIEN | |||||
#undef UHADDR | |||||
#undef UHFNUM | |||||
#undef UHFNUML | |||||
#undef UHFNUMH | |||||
#undef UHFLEN | |||||
#undef UPINRQX | |||||
#undef UPINTX | |||||
#undef UPNUM | |||||
#undef UPRST | |||||
#undef UPCONX | |||||
#undef UPCFG0X | |||||
#undef UPCFG1X | |||||
#undef UPSTAX | |||||
#undef UPCFG2X | |||||
#undef UPIENX | |||||
#undef UPDATX | |||||
#undef TCCR2A | |||||
#undef WGM20 | |||||
#undef WGM21 | |||||
#undef COM2B0 | |||||
#undef COM2B1 | |||||
#undef COM2A0 | |||||
#undef COM2A1 | |||||
#undef TCCR2B | |||||
#undef CS20 | |||||
#undef CS21 | |||||
#undef CS22 | |||||
#undef WGM22 | |||||
#undef FOC2B | |||||
#undef FOC2A | |||||
#undef TCNT2 | |||||
#undef TCNT2_0 | |||||
#undef TCNT2_1 | |||||
#undef TCNT2_2 | |||||
#undef TCNT2_3 | |||||
#undef TCNT2_4 | |||||
#undef TCNT2_5 | |||||
#undef TCNT2_6 | |||||
#undef TCNT2_7 | |||||
#undef OCR2A | |||||
#undef OCR2_0 | |||||
#undef OCR2_1 | |||||
#undef OCR2_2 | |||||
#undef OCR2_3 | |||||
#undef OCR2_4 | |||||
#undef OCR2_5 | |||||
#undef OCR2_6 | |||||
#undef OCR2_7 | |||||
#undef OCR2B | |||||
#undef OCR2_0 | |||||
#undef OCR2_1 | |||||
#undef OCR2_2 | |||||
#undef OCR2_3 | |||||
#undef OCR2_4 | |||||
#undef OCR2_5 | |||||
#undef OCR2_6 | |||||
#undef OCR2_7 | |||||
#define NUM_DIGITAL_PINS 30 | |||||
#define NUM_ANALOG_INPUTS 12 | |||||
#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) | |||||
#define TXLED0 PORTD |= (1<<5) | |||||
#define TXLED1 PORTD &= ~(1<<5) | |||||
#define RXLED0 PORTB |= (1<<0) | |||||
#define RXLED1 PORTB &= ~(1<<0) | |||||
static const uint8_t SDA = 2; | |||||
static const uint8_t SCL = 3; | |||||
#define LED_BUILTIN 13 | |||||
// Map SPI port to 'new' pins D14..D17 | |||||
static const uint8_t SS = 17; | |||||
static const uint8_t MOSI = 16; | |||||
static const uint8_t MISO = 14; | |||||
static const uint8_t SCK = 15; | |||||
// Mapping of analog pins as digital I/O | |||||
// A6-A11 share with digital pins | |||||
static const uint8_t ADC0 = 18; | |||||
static const uint8_t ADC1 = 19; | |||||
static const uint8_t ADC2 = 20; | |||||
static const uint8_t ADC3 = 21; | |||||
static const uint8_t ADC4 = 22; | |||||
static const uint8_t ADC5 = 23; | |||||
static const uint8_t ADC6 = 24; // D4 | |||||
static const uint8_t ADC7 = 25; // D6 | |||||
static const uint8_t ADC8 = 26; // D8 | |||||
static const uint8_t ADC9 = 27; // D9 | |||||
static const uint8_t ADC10 = 28; // D10 | |||||
static const uint8_t ADC11 = 29; // D12 | |||||
#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) | |||||
#define digitalPinToPCICRbit(p) 0 | |||||
#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) | |||||
#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) | |||||
// __AVR_ATmega32U4__ has an unusual mapping of pins to channels | |||||
extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; | |||||
#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) | |||||
#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) | |||||
#ifdef ARDUINO_MAIN | |||||
// On the Arduino board, digital pins are also used | |||||
// for the analog output (software PWM). Analog input | |||||
// pins are a separate set. | |||||
// ATMEL ATMEGA32U4 / ARDUINO LEONARDO | |||||
// | |||||
// D0 PD2 RXD1/INT2 | |||||
// D1 PD3 TXD1/INT3 | |||||
// D2 PD1 SDA SDA/INT1 | |||||
// D3# PD0 PWM8/SCL OC0B/SCL/INT0 | |||||
// D4 A6 PD4 ADC8 | |||||
// D5# PC6 ??? OC3A/#OC4A | |||||
// D6# A7 PD7 FastPWM #OC4D/ADC10 | |||||
// D7 PE6 INT6/AIN0 | |||||
// | |||||
// D8 A8 PB4 ADC11/PCINT4 | |||||
// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 | |||||
// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 | |||||
// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 | |||||
// D12 A11 PD6 T1/#OC4D/ADC9 | |||||
// D13# PC7 PWM10 CLK0/OC4A | |||||
// | |||||
// A0 D18 PF7 ADC7 | |||||
// A1 D19 PF6 ADC6 | |||||
// A2 D20 PF5 ADC5 | |||||
// A3 D21 PF4 ADC4 | |||||
// A4 D22 PF1 ADC1 | |||||
// A5 D23 PF0 ADC0 | |||||
// | |||||
// New pins D14..D17 to map SPI port to digital pins | |||||
// | |||||
// MISO D14 PB3 MISO,PCINT3 | |||||
// SCK D15 PB1 SCK,PCINT1 | |||||
// MOSI D16 PB2 MOSI,PCINT2 | |||||
// SS D17 PB0 RXLED,SS/PCINT0 | |||||
// | |||||
// Connected LEDs on board for TX and RX | |||||
// TXLED D24 PD5 XCK1 | |||||
// RXLED D17 PB0 | |||||
// HWB PE2 HWB | |||||
// these arrays map port names (e.g. port B) to the | |||||
// appropriate addresses for various functions (e.g. reading | |||||
// and writing) | |||||
const uint16_t PROGMEM port_to_mode_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &DDRB, | |||||
(uint16_t) &DDRC, | |||||
(uint16_t) &DDRD, | |||||
(uint16_t) &DDRE, | |||||
(uint16_t) &DDRF, | |||||
}; | |||||
const uint16_t PROGMEM port_to_output_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &PORTB, | |||||
(uint16_t) &PORTC, | |||||
(uint16_t) &PORTD, | |||||
(uint16_t) &PORTE, | |||||
(uint16_t) &PORTF, | |||||
}; | |||||
const uint16_t PROGMEM port_to_input_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &PINB, | |||||
(uint16_t) &PINC, | |||||
(uint16_t) &PIND, | |||||
(uint16_t) &PINE, | |||||
(uint16_t) &PINF, | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_port_PGM[] = { | |||||
PD, // D0 - PD2 | |||||
PD, // D1 - PD3 | |||||
PD, // D2 - PD1 | |||||
PD, // D3 - PD0 | |||||
PD, // D4 - PD4 | |||||
PC, // D5 - PC6 | |||||
PD, // D6 - PD7 | |||||
PE, // D7 - PE6 | |||||
PB, // D8 - PB4 | |||||
PB, // D9 - PB5 | |||||
PB, // D10 - PB6 | |||||
PB, // D11 - PB7 | |||||
PD, // D12 - PD6 | |||||
PC, // D13 - PC7 | |||||
PB, // D14 - MISO - PB3 | |||||
PB, // D15 - SCK - PB1 | |||||
PB, // D16 - MOSI - PB2 | |||||
PB, // D17 - SS - PB0 | |||||
PF, // D18 - A0 - PF7 | |||||
PF, // D19 - A1 - PF6 | |||||
PF, // D20 - A2 - PF5 | |||||
PF, // D21 - A3 - PF4 | |||||
PF, // D22 - A4 - PF1 | |||||
PF, // D23 - A5 - PF0 | |||||
PD, // D24 - PD5 | |||||
PD, // D25 / D6 - A7 - PD7 | |||||
PB, // D26 / D8 - A8 - PB4 | |||||
PB, // D27 / D9 - A9 - PB5 | |||||
PB, // D28 / D10 - A10 - PB6 | |||||
PD, // D29 / D12 - A11 - PD6 | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { | |||||
_BV(2), // D0 - PD2 | |||||
_BV(3), // D1 - PD3 | |||||
_BV(1), // D2 - PD1 | |||||
_BV(0), // D3 - PD0 | |||||
_BV(4), // D4 - PD4 | |||||
_BV(6), // D5 - PC6 | |||||
_BV(7), // D6 - PD7 | |||||
_BV(6), // D7 - PE6 | |||||
_BV(4), // D8 - PB4 | |||||
_BV(5), // D9 - PB5 | |||||
_BV(6), // D10 - PB6 | |||||
_BV(7), // D11 - PB7 | |||||
_BV(6), // D12 - PD6 | |||||
_BV(7), // D13 - PC7 | |||||
_BV(3), // D14 - MISO - PB3 | |||||
_BV(1), // D15 - SCK - PB1 | |||||
_BV(2), // D16 - MOSI - PB2 | |||||
_BV(0), // D17 - SS - PB0 | |||||
_BV(7), // D18 - A0 - PF7 | |||||
_BV(6), // D19 - A1 - PF6 | |||||
_BV(5), // D20 - A2 - PF5 | |||||
_BV(4), // D21 - A3 - PF4 | |||||
_BV(1), // D22 - A4 - PF1 | |||||
_BV(0), // D23 - A5 - PF0 | |||||
_BV(5), // D24 - PD5 | |||||
_BV(7), // D25 / D6 - A7 - PD7 | |||||
_BV(4), // D26 / D8 - A8 - PB4 | |||||
_BV(5), // D27 / D9 - A9 - PB5 | |||||
_BV(6), // D28 / D10 - A10 - PB6 | |||||
_BV(6), // D29 / D12 - A11 - PD6 | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
TIMER0B, /* 3 */ | |||||
NOT_ON_TIMER, | |||||
TIMER3A, /* 5 */ | |||||
TIMER4D, /* 6 */ | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
TIMER1A, /* 9 */ | |||||
TIMER1B, /* 10 */ | |||||
TIMER0A, /* 11 */ | |||||
NOT_ON_TIMER, | |||||
TIMER4A, /* 13 */ | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
}; | |||||
const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { | |||||
7, // A0 PF7 ADC7 | |||||
6, // A1 PF6 ADC6 | |||||
5, // A2 PF5 ADC5 | |||||
4, // A3 PF4 ADC4 | |||||
1, // A4 PF1 ADC1 | |||||
0, // A5 PF0 ADC0 | |||||
8, // A6 D4 PD4 ADC8 | |||||
10, // A7 D6 PD7 ADC10 | |||||
11, // A8 D8 PB4 ADC11 | |||||
12, // A9 D9 PB5 ADC12 | |||||
13, // A10 D10 PB6 ADC13 | |||||
9 // A11 D12 PD6 ADC9 | |||||
}; | |||||
#endif /* ARDUINO_MAIN */ | |||||
// These serial port names are intended to allow libraries and architecture-neutral | |||||
// sketches to automatically default to the correct port name for a particular type | |||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, | |||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use. | |||||
// | |||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor | |||||
// | |||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial | |||||
// | |||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library | |||||
// | |||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. | |||||
// | |||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX | |||||
// pins are NOT connected to anything by default. | |||||
#define SERIAL_PORT_MONITOR Serial | |||||
#define SERIAL_PORT_USBVIRTUAL Serial | |||||
#define SERIAL_PORT_HARDWARE Serial1 | |||||
#define SERIAL_PORT_HARDWARE_OPEN Serial1 | |||||
#endif /* Pins_Arduino_h */ |
@ -0,0 +1,66 @@ | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
#BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality | |||||
#MIDI_ENABLE ?= no # MIDI controls | |||||
UNICODE_ENABLE ?= yes # Unicode | |||||
#BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend |