|
|
@ -62,15 +62,17 @@ Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help |
|
|
|
|
|
|
|
To configure the backlighting, `#define` these in your `config.h`: |
|
|
|
|
|
|
|
| Define | Default | Description | |
|
|
|
|------------------------|---------------|-------------------------------------------------------------------------------------------------------------------| |
|
|
|
| `BACKLIGHT_PIN` | *Not defined* | The pin that controls the LED(s) | |
|
|
|
| `BACKLIGHT_LEVELS` | `3` | The number of brightness levels (maximum 31 excluding off) | |
|
|
|
| `BACKLIGHT_CAPS_LOCK` | *Not defined* | Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | |
|
|
|
| `BACKLIGHT_BREATHING` | *Not defined* | Enable backlight breathing, if supported | |
|
|
|
| `BREATHING_PERIOD` | `6` | The length of one backlight "breath" in seconds | |
|
|
|
| `BACKLIGHT_ON_STATE` | `1` | The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | |
|
|
|
| `BACKLIGHT_LIMIT_VAL ` | `255` | The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum. | |
|
|
|
|Define |Default |Description | |
|
|
|
|-----------------------------|------------------|-----------------------------------------------------------------------------------------------------------------| |
|
|
|
|`BACKLIGHT_PIN` |*Not defined* |The pin that controls the LED(s) | |
|
|
|
|`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 31 excluding off) | |
|
|
|
|`BACKLIGHT_CAPS_LOCK` |*Not defined* |Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | |
|
|
|
|`BACKLIGHT_BREATHING` |*Not defined* |Enable backlight breathing, if supported | |
|
|
|
|`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds | |
|
|
|
|`BACKLIGHT_ON_STATE` |`1` |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | |
|
|
|
|`BACKLIGHT_LIMIT_VAL` |`255` |The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum.| |
|
|
|
|`BACKLIGHT_DEFAULT_LEVEL` |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM | |
|
|
|
|`BACKLIGHT_DEFAULT_BREATHING`|*Not defined* |Whether to enable backlight breathing upon clearing the EEPROM | |
|
|
|
|
|
|
|
Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`. |
|
|
|
|
|
|
|