@ -0,0 +1,137 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = clueboard1 | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# # project specific files | |||
SRC = clueboard1.c \ | |||
led.c \ | |||
ifdef KEYMAP | |||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymaps/keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
# MIDI_ENABLE = YES # MIDI controls | |||
# UNICODE_ENABLE = YES # Unicode | |||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TOP_DIR)/quantum/quantum.mk |
@ -0,0 +1,27 @@ | |||
#include "clueboard1.h" | |||
__attribute__ ((weak)) | |||
void * matrix_init_user(void) { | |||
// leave these blank | |||
}; | |||
__attribute__ ((weak)) | |||
void * matrix_scan_user(void) { | |||
// leave these blank | |||
}; | |||
void * matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
if (matrix_init_user) { | |||
(*matrix_init_user)(); | |||
} | |||
}; | |||
void * matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
if (matrix_scan_user) { | |||
(*matrix_scan_user)(); | |||
} | |||
}; |
@ -0,0 +1,52 @@ | |||
#ifndef CLUEBOARD1_H | |||
#define CLUEBOARD1_H | |||
#include "matrix.h" | |||
#include "keymap_common.h" | |||
#include <stddef.h> | |||
/* Clueboard matrix layout | |||
* ,-----------------------------------------------------------. ,---. | |||
* | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| | 0F| | |||
* |-----------------------------------------------------------| |---| | |||
* | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| | 1F| | |||
* |-----------------------------------------------------------| `---' | |||
* | 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C| 2D| | |||
* |------------------------------------------------------------. | |||
* | 30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C| 3D|3E| | |||
* |------------------------------------------------------------------. | |||
* | 40| 41| 42| 43| 45| 46| 49| 4A| 4B| 4C| 4D| 4E| 4F| | |||
* `------------------------------------------------------------------' | |||
* ,-----------------------------------------------------------. ,---. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| | |||
* |-----------------------------------------------------------| |---| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| | |||
* |-----------------------------------------------------------| `---' | |||
* |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| | |||
* |--------------------------------------------------------------. | |||
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| | |||
* |------------------------------------------------------------------. | |||
* |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| | |||
* `------------------------------------------------------------------' | |||
*/ | |||
// The first section contains all of the arguements | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k45, k46, k49, k4A, k4B, k4C, k4D, k4E, k4F \ | |||
) { \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, k45, k46, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E, k4F } \ | |||
} | |||
void * matrix_init_user(void); | |||
void * matrix_scan_user(void); | |||
#endif |
@ -0,0 +1,86 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xC1ED | |||
#define PRODUCT_ID 0x2301 | |||
#define DEVICE_VER 0x0003 | |||
#define MANUFACTURER Clueboard | |||
#define PRODUCT Clueboard | |||
#define DESCRIPTION QMK keyboard firmware for Clueboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 16 | |||
// COLS: Left to right, ROWS: Top to bottom | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 | |||
* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1 | |||
*/ | |||
#define COLS (int []){ B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 | |||
* pin: D1 D0 D2 D5 D3 | |||
*/ | |||
#define ROWS (int []){ D1, D0, D2, D5, D3 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,108 @@ | |||
#include "clueboard1.h" | |||
// Used for SHIFT_ESC | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _RS 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| | |||
* |--------------------------------------------------------------------------| `----' | |||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| | |||
* |-----------------------------------------------------------------------------. | |||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ | |||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), | |||
/* Keymap _FL: Function Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | |PGUP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL|HOME|PGDN| END| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_INC, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), | |||
/* Keymap _RS: Reset layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | | | | | | | | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | |RESET| | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL| | | | | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_RS] = KEYMAP( | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; | |||
enum function_id { | |||
SHIFT_ESC, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
static uint8_t shift_esc_shift_mask; | |||
switch (id) { | |||
case SHIFT_ESC: | |||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||
if (record->event.pressed) { | |||
if (shift_esc_shift_mask) { | |||
add_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
add_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
if (shift_esc_shift_mask) { | |||
del_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
del_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} | |||
break; | |||
} | |||
} |
@ -0,0 +1,34 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
void led_set(uint8_t usb_led) | |||
{ | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// output low | |||
DDRB |= (1<<2); | |||
PORTB &= ~(1<<2); | |||
} else { | |||
// Hi-Z | |||
DDRB &= ~(1<<2); | |||
PORTB &= ~(1<<2); | |||
} | |||
} |
@ -0,0 +1,140 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = clueboard2 | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# # project specific files | |||
SRC = clueboard2.c led.c | |||
ifdef KEYMAP | |||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymaps/keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
# MIDI_ENABLE = YES # MIDI controls | |||
# UNICODE_ENABLE = YES # Unicode | |||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
#ifdef BACKLIGHT_ENABLE | |||
SRC := backlight.c $(SRC) | |||
#endif | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TOP_DIR)/quantum/quantum.mk |
@ -0,0 +1,41 @@ | |||
#include <avr/io.h> | |||
#include "backlight.h" | |||
#include "print.h" | |||
/* Clueboard 2.0 LED locations: | |||
* | |||
* Capslock: B4, pull high to turn on | |||
* LCtrl: Shared with Capslock, DO NOT INSTALL LED'S IN BOTH | |||
* Page Up: B7, pull high to turn on | |||
* Escape: D6, pull high to turn on | |||
* Arrows: D4, pull high to turn on | |||
*/ | |||
void init_backlight_pin(void) { | |||
print("init_backlight_pin()\n"); | |||
// Set our LED pins as output | |||
DDRD |= (1<<6); // Esc | |||
DDRB |= (1<<7); // Page Up | |||
DDRD |= (1<<4); // Arrows | |||
// Set our LED pins low | |||
PORTD &= ~(1<<6); // Esc | |||
PORTB &= ~(1<<7); // Page Up | |||
PORTD &= ~(1<<4); // Arrows | |||
} | |||
void backlight_set(uint8_t level) { | |||
if ( level == 0 ) { | |||
// Turn off light | |||
PORTD |= (1<<6); // Esc | |||
PORTB |= (1<<7); // Page Up | |||
PORTD |= (1<<4); // Arrows | |||
} else { | |||
// Turn on light | |||
PORTD &= ~(1<<6); // Esc | |||
PORTB &= ~(1<<7); // Page Up | |||
PORTD &= ~(1<<4); // Arrows | |||
} | |||
} | |||
@ -0,0 +1,44 @@ | |||
#include "clueboard2.h" | |||
#ifdef BACKLIGHT_ENABLE | |||
#include "backlight.h" | |||
#endif | |||
__attribute__ ((weak)) | |||
void * matrix_init_user(void) { | |||
// leave these blank | |||
}; | |||
__attribute__ ((weak)) | |||
void * matrix_scan_user(void) { | |||
// leave these blank | |||
}; | |||
void * matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
if (matrix_init_user) { | |||
(*matrix_init_user)(); | |||
} | |||
led_init_ports(); | |||
#ifdef BACKLIGHT_ENABLE | |||
init_backlight_pin(); | |||
#endif | |||
#ifdef RGBLIGHT_ENABLE | |||
rgblight_init(); | |||
#endif | |||
// JTAG disable for PORT F. write JTD bit twice within four cycles. | |||
MCUCR |= (1<<JTD); | |||
MCUCR |= (1<<JTD); | |||
}; | |||
void * matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
if (matrix_scan_user) { | |||
(*matrix_scan_user)(); | |||
} | |||
}; |
@ -0,0 +1,57 @@ | |||
#ifndef CLUEBOARD2_H | |||
#define CLUEBOARD2_H | |||
#include "matrix.h" | |||
#include "keymap_common.h" | |||
#include <stddef.h> | |||
/* Clueboard matrix layout | |||
* ,-----------------------------------------------------------. ,---. | |||
* | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57| | |||
* |-----------------------------------------------------------| |---| | |||
* | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| | |||
* |-----------------------------------------------------------| `---' | |||
* | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| | |||
* |------------------------------------------------------------. | |||
* | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| | |||
* |------------------------------------------------------------------. | |||
* | 40| 41| 42| 43| 45| 46| 90| 91| 92| 93| 94| 95| 96| | |||
* `------------------------------------------------------------------' | |||
* ,-----------------------------------------------------------. ,---. | |||
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| | |||
* |-----------------------------------------------------------| |---| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| | |||
* |-----------------------------------------------------------| `---' | |||
* |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| | |||
* |--------------------------------------------------------------. | |||
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| | |||
* |------------------------------------------------------------------. | |||
* |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| | |||
* `------------------------------------------------------------------' | |||
*/ | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ | |||
k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ | |||
) { \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \ | |||
{ k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \ | |||
{ k50, k51, k52, k53, k54, k55, k56, k57 }, \ | |||
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ | |||
{ k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ | |||
{ k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ | |||
{ k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ | |||
} | |||
void * matrix_init_user(void); | |||
void * matrix_scan_user(void); | |||
#endif |
@ -0,0 +1,100 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xC1ED | |||
#define PRODUCT_ID 0x2320 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Clueboard | |||
#define PRODUCT Clueboard with RGB Underlighting | |||
#define DESCRIPTION QMK keyboard firmware for Clueboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
// COLS: Left to right, ROWS: Top to bottom | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 | |||
* pin: F0 F1 F4 F5 F6 F7 E6 B1 | |||
*/ | |||
#define COLS (int []){ F0, F1, F4, F5, F6, F7, E6, B1 } | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 5 6 7 8 9 | |||
* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 | |||
*/ | |||
#define ROWS (int []){ B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* Backlight configuration | |||
*/ | |||
#define BACKLIGHT_LEVELS 1 | |||
/* Underlight configuration | |||
*/ | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
#define ws2812_pin 7 | |||
#define RGBLED_NUM 14 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,170 @@ | |||
#include "clueboard2.h" | |||
#ifdef ENABLE_RGBLIGHT | |||
#include "rgblight.h" | |||
#endif | |||
// Used for SHIFT_ESC | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _RS 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| | |||
* |--------------------------------------------------------------------------| `----' | |||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| | |||
* |-----------------------------------------------------------------------------. | |||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ | |||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), | |||
/* Keymap _FL: Function Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | |PGUP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL|HOME|PGDN| END| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), | |||
/* Keymap _RS: Reset layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | | | | | | | | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | |RESET| | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL| | | | | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_RS] = KEYMAP( | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(0), F(6), \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(7), \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(4), \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(1), F(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(3), F(5), F(2)), | |||
}; | |||
enum function_id { | |||
SHIFT_ESC, | |||
RGBLED_TOGGLE, | |||
RGBLED_STEP_MODE, | |||
RGBLED_INCREASE_HUE, | |||
RGBLED_DECREASE_HUE, | |||
RGBLED_INCREASE_SAT, | |||
RGBLED_DECREASE_SAT, | |||
RGBLED_INCREASE_VAL, | |||
RGBLED_DECREASE_VAL | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||
[1] = ACTION_FUNCTION(RGBLED_TOGGLE), | |||
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE), | |||
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), | |||
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), | |||
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), | |||
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), | |||
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), | |||
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
static uint8_t shift_esc_shift_mask; | |||
switch (id) { | |||
case SHIFT_ESC: | |||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||
if (record->event.pressed) { | |||
if (shift_esc_shift_mask) { | |||
add_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
add_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
if (shift_esc_shift_mask) { | |||
del_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
del_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} | |||
break; | |||
//led operations | |||
case RGBLED_TOGGLE: | |||
if (record->event.pressed) { | |||
rgblight_toggle(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_increase_hue(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_decrease_hue(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_increase_sat(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_decrease_sat(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_increase_val(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_decrease_val(); | |||
} | |||
break; | |||
case RGBLED_STEP_MODE: | |||
if (record->event.pressed) { | |||
rgblight_step(); | |||
} | |||
break; | |||
} | |||
} |
@ -0,0 +1,147 @@ | |||
#include "clueboard2.h" | |||
#ifdef ENABLE_RGBLIGHT | |||
#include "rgblight.h" | |||
#endif | |||
// Used for SHIFT_ESC | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _RS 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn| | |||
* |--------------------------------------------------------------------------| `----' | |||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| | |||
* |-----------------------------------------------------------------------------. | |||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ | |||
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ | |||
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), | |||
/* Keymap _FL: Function Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | |PGUP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL|HOME|PGDN| END| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), | |||
/* Keymap _RS: Reset/Underlight layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | | | | | | | | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | |RESET| | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL| | | | | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_RS] = KEYMAP( | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(0), F(6), \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(7), \ | |||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(4), \ | |||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(1), F(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(3), F(5), F(2)), | |||
}; | |||
enum function_id { | |||
RGBLED_TOGGLE, | |||
RGBLED_STEP_MODE, | |||
RGBLED_INCREASE_HUE, | |||
RGBLED_DECREASE_HUE, | |||
RGBLED_INCREASE_SAT, | |||
RGBLED_DECREASE_SAT, | |||
RGBLED_INCREASE_VAL, | |||
RGBLED_DECREASE_VAL, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(RGBLED_TOGGLE), | |||
[1] = ACTION_FUNCTION(RGBLED_STEP_MODE), | |||
[2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), | |||
[3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), | |||
[4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), | |||
[5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), | |||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), | |||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
switch (id) { | |||
case RGBLED_TOGGLE: | |||
//led operations | |||
if (record->event.pressed) { | |||
rgblight_toggle(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_increase_hue(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_decrease_hue(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_increase_sat(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_decrease_sat(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_increase_val(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_decrease_val(); | |||
} | |||
break; | |||
case RGBLED_STEP_MODE: | |||
if (record->event.pressed) { | |||
rgblight_step(); | |||
} | |||
break; | |||
} | |||
} |
@ -0,0 +1,108 @@ | |||
#include "clueboard2.h" | |||
// Used for SHIFT_ESC | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _RS 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| | |||
* |--------------------------------------------------------------------------| `----' | |||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| | |||
* |-----------------------------------------------------------------------------. | |||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ | |||
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ | |||
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ | |||
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), | |||
/* Keymap _FL: Function Layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | |PGUP| | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL|HOME|PGDN| END| | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), | |||
/* Keymap _RS: Reset layer | |||
* ,--------------------------------------------------------------------------. ,----. | |||
* | | | | | | | | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| |----| | |||
* | | | | |RESET| | | | | | | | | | | | | |||
* |--------------------------------------------------------------------------| `----' | |||
* | | | _RS| | | | | | | | | | | | | |||
* |-----------------------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------------------------------------------------------------------------|----|----. | |||
* | | | | | | | | | | _FL| | | | | |||
* `----------------------------------------------------------------------------------' | |||
*/ | |||
[_RS] = KEYMAP( | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; | |||
enum function_id { | |||
SHIFT_ESC, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
static uint8_t shift_esc_shift_mask; | |||
switch (id) { | |||
case SHIFT_ESC: | |||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||
if (record->event.pressed) { | |||
if (shift_esc_shift_mask) { | |||
add_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
add_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
if (shift_esc_shift_mask) { | |||
del_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
del_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} | |||
break; | |||
} | |||
} |
@ -0,0 +1,36 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
void led_init_ports() { | |||
// * Set our LED pins as output | |||
DDRB |= (1<<4); | |||
} | |||
void led_set(uint8_t usb_led) { | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// Turn capslock on | |||
PORTB |= (1<<4); | |||
} else { | |||
// Turn capslock off | |||
PORTB &= ~(1<<4); | |||
} | |||
} |
@ -0,0 +1,136 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Target file name (without extension). | |||
TARGET = cluepad | |||
# Directory common source filess exist | |||
TOP_DIR = ../.. | |||
TMK_DIR = ../../tmk_core | |||
# Directory keyboard dependent files exist | |||
TARGET_DIR = . | |||
# # project specific files | |||
SRC = cluepad.c backlight.c | |||
ifdef KEYMAP | |||
SRC := keymaps/keymap_$(KEYMAP).c $(SRC) | |||
else | |||
SRC := keymaps/keymap_default.c $(SRC) | |||
endif | |||
CONFIG_H = config.h | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = yes # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality | |||
RGBLIGHT_ENABLE = yes | |||
# MIDI_ENABLE = YES # MIDI controls | |||
# UNICODE_ENABLE = YES # Unicode | |||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
# Optimize size but this may cause error "relocation truncated to fit" | |||
#EXTRALDFLAGS = -Wl,--relax | |||
# Search Path | |||
VPATH += $(TARGET_DIR) | |||
VPATH += $(TOP_DIR) | |||
VPATH += $(TMK_DIR) | |||
include $(TOP_DIR)/quantum/quantum.mk |
@ -0,0 +1,54 @@ | |||
#include <avr/io.h> | |||
#include "backlight.h" | |||
#include "led.h" | |||
#include "print.h" | |||
int pwm_level; | |||
void led_set(uint8_t usb_led) | |||
{ | |||
print("led_set\n"); | |||
} | |||
void init_backlight_pin(void) | |||
{ | |||
// Set C7 to output | |||
DDRC |= (1<<7); | |||
// Initialize the timer | |||
TC4H = 0x03; | |||
OCR4C = 0xFF; | |||
TCCR4A = 0b10000010; | |||
TCCR4B = 0b00000001; | |||
} | |||
void backlight_set(uint8_t level) | |||
{ | |||
// Determine the PWM level | |||
switch (level) | |||
{ | |||
case 0: | |||
// 33% | |||
pwm_level = 0x54; | |||
break; | |||
case 1: | |||
// 66% | |||
pwm_level = 0xA8; | |||
break; | |||
case 2: | |||
// 100% | |||
pwm_level = 0xFF; | |||
break; | |||
case 3: | |||
// 0% | |||
pwm_level = 0x00; | |||
break; | |||
default: | |||
xprintf("Unknown level: %d\n", level); | |||
} | |||
// Write the PWM level to the timer | |||
TC4H = pwm_level >> 8; | |||
OCR4A = 0xFF & pwm_level; | |||
} |
@ -0,0 +1,39 @@ | |||
#include "cluepad.h" | |||
__attribute__ ((weak)) | |||
void * matrix_init_user(void) { | |||
// leave these blank | |||
}; | |||
__attribute__ ((weak)) | |||
void * matrix_scan_user(void) { | |||
// leave these blank | |||
}; | |||
void * matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
if (matrix_init_user) { | |||
(*matrix_init_user)(); | |||
} | |||
#ifdef BACKLIGHT_ENABLE | |||
init_backlight_pin(); | |||
#endif | |||
#ifdef RGBLIGHT_ENABLE | |||
rgblight_init(); | |||
#endif | |||
// JTAG disable for PORT F. write JTD bit twice within four cycles. | |||
MCUCR |= (1<<JTD); | |||
MCUCR |= (1<<JTD); | |||
}; | |||
void * matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
if (matrix_scan_user) { | |||
(*matrix_scan_user)(); | |||
} | |||
}; |
@ -0,0 +1,41 @@ | |||
#ifndef CLUEPAD_H | |||
#define CLUEPAD_H | |||
#include "matrix.h" | |||
#include "keymap_common.h" | |||
#include <stddef.h> | |||
/* Cluepad matrix layout | |||
* .-------------------. | |||
* |NLCK| /| *| -| | |||
* |-------------------| | |||
* | 7| 8| 9| | | |||
* |--------------| | | |||
* | 4| 5| 6| +| | |||
* |-------------------| | |||
* | 1| 2| 3| | | |||
* |--------------| | | |||
* | 0| .| Ent| | |||
* '-------------------' | |||
*/ | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22, \ | |||
k30, k31, k32, k33, \ | |||
k40, k42 \ | |||
) { \ | |||
{ k00, k01, k02, k03, }, \ | |||
{ k10, k11, k12, k13, }, \ | |||
{ k20, k21, k22, KC_NO, }, \ | |||
{ k30, k31, k32, k33, }, \ | |||
{ k40, KC_NO, k42, KC_NO } \ | |||
} | |||
void * matrix_init_user(void); | |||
void * matrix_scan_user(void); | |||
#endif |
@ -0,0 +1,102 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xC1ED | |||
#define PRODUCT_ID 0x2312 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Clueboard | |||
#define PRODUCT Cluepad with RGB Underlighting | |||
#define DESCRIPTION QMK keyboard firmware for Cluepad | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 4 | |||
// COLS: Left to right, ROWS: Top to bottom | |||
/* Column pin configuration | |||
* col: 0 1 2 3 | |||
* pin: F4 E6 B1 D2 | |||
*/ | |||
#define COLS (int []){ F4, E6, B1, D2 } | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 | |||
* pin: | |||
*/ | |||
#define ROWS (int []){ B0, D3, D5, D4, D6 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Number of backlighting levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* Underlight configuration | |||
*/ | |||
#define ws2812_PORTREG PORTF | |||
#define ws2812_DDRREG DDRF | |||
#define ws2812_pin 6 | |||
#define RGBLED_NUM 4 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* Debug forcibly enabled */ | |||
#define ALWAYS_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,122 @@ | |||
#include "cluepad.h" | |||
#include "backlight.h" | |||
#include "rgblight.h" | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _RS 2 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* .-------------------. | |||
* |NL F| /| *| -| | |||
* |-------------------| | |||
* | 7| 8| 9| | | |||
* |--------------| | | |||
* | 4| 5| 6| +| | |||
* |-------------------| | |||
* | 1| 2| 3| | | |||
* |--------------| | | |||
* | 0| .| Ent| | |||
* '-------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \ | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, \ | |||
KC_P4, KC_P5, KC_P6, \ | |||
KC_P1, KC_P2, KC_P3, KC_PENT, \ | |||
KC_P0, KC_PDOT), | |||
/* Keymap _FL: Function Layer | |||
* .-------------------. | |||
* |NL F| | | Fn0| | |||
* |-------------------| | |||
* | Fn2| | Fn4| | | |||
* |--------------| | | |||
* | Fn3|BL_S| Fn5| Fn6| | |||
* |-------------------| | |||
* | | | | | | |||
* |--------------| | | |||
* | Fn1| | Fn7| | |||
* '-------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \ | |||
F(2), KC_TRNS, F(4), F(6), \ | |||
F(3), BL_STEP, F(5), \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, F(7), \ | |||
F(1), KC_TRNS) | |||
}; | |||
enum function_id { | |||
RGBLED_TOGGLE, | |||
RGBLED_STEP_MODE, | |||
RGBLED_INCREASE_HUE, | |||
RGBLED_DECREASE_HUE, | |||
RGBLED_INCREASE_SAT, | |||
RGBLED_DECREASE_SAT, | |||
RGBLED_INCREASE_VAL, | |||
RGBLED_DECREASE_VAL, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(RGBLED_TOGGLE), | |||
[1] = ACTION_FUNCTION(RGBLED_STEP_MODE), | |||
[2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), | |||
[3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), | |||
[4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), | |||
[5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), | |||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), | |||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
switch (id) { | |||
case RGBLED_TOGGLE: | |||
if (record->event.pressed) { | |||
rgblight_toggle(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_increase_hue(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_decrease_hue(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_increase_sat(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_decrease_sat(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_increase_val(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_decrease_val(); | |||
} | |||
break; | |||
case RGBLED_STEP_MODE: | |||
if (record->event.pressed) { | |||
rgblight_step(); | |||
} | |||
break; | |||
} | |||
} | |||