@ -0,0 +1,73 @@ | |||
/* | |||
Copyright 2021 DTIsaac | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x4454 // DT | |||
#define PRODUCT_ID 0x4973 // Is | |||
#define DEVICE_VER 0x0004 | |||
#define MANUFACTURER DTIsaac | |||
#define PRODUCT >_Dosa40 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 11 | |||
/* AdafruitBle Pin */ | |||
#define AdafruitBleResetPin D4 | |||
#define AdafruitBleCSPin B4 | |||
#define AdafruitBleIRQPin E6 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B7, D7, F1, F0 } | |||
#define MATRIX_COL_PINS { D1, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
#ifdef RGB_MATRIX_ENABLE | |||
#define RGB_DI_PIN D0 | |||
#define DRIVER_LED_TOTAL 42 | |||
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses | |||
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) | |||
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS | |||
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects | |||
// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended | |||
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) | |||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 | |||
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION |
@ -0,0 +1,39 @@ | |||
/* Copyright 2021 DTIsaac | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "dosa40rgb.h" | |||
#ifdef RGB_MATRIX_ENABLE | |||
led_config_t g_led_config = { { | |||
//Key Matrix to LED Index | |||
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, | |||
{22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12 }, | |||
{23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33}, | |||
{41, 40, 39, NO_LED, 38, NO_LED, 37, 36, 35, 34, 11} | |||
}, { | |||
//LED Index to Physical Positon | |||
{ 0, 0}, { 20, 0}, { 40, 0 }, { 61, 0 }, { 81, 0}, { 101, 0}, { 122, 0}, { 142, 0}, { 162, 0}, { 183, 0}, { 203, 0}, { 224, 0}, | |||
{203, 21}, {183, 21}, {162,21 }, {142, 21}, {122,21}, { 101,21}, { 81 ,21}, { 61 ,21}, { 40 ,21}, { 20 ,21}, { 0 ,21}, | |||
{ 0, 42}, { 20, 42}, { 40,42 }, { 61, 42}, { 81,42}, { 101,42}, { 122,42}, { 142,42}, { 162,42}, { 183,42}, { 203,42}, | |||
{203, 64}, {183, 64}, {162,64 }, {122, 64}, { 81,64}, { 40, 64}, { 20, 64}, { 0, 64}, | |||
}, { | |||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 1, 1, 1, 1, 1, 1, 1, | |||
} }; | |||
#endif |
@ -0,0 +1,40 @@ | |||
/* Copyright 2021 DTIsaac | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k41, \ | |||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, \ | |||
k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32, \ | |||
k33, k34, k35, k36, k37, k38, k39, k40 \ | |||
) \ | |||
{ \ | |||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10}, \ | |||
{k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21}, \ | |||
{k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32}, \ | |||
{k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \ | |||
} |
@ -0,0 +1,53 @@ | |||
{ | |||
"keyboard_name": ">_Dosa40rgb", | |||
"url": "", | |||
"maintainer": "DTIsaac", | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label":"Esc", "x":0, "y":0}, | |||
{"label":"Q", "x":1, "y":0}, | |||
{"label":"W", "x":2, "y":0}, | |||
{"label":"E", "x":3, "y":0}, | |||
{"label":"R", "x":4, "y":0}, | |||
{"label":"T", "x":5, "y":0}, | |||
{"label":"Y", "x":6, "y":0}, | |||
{"label":"U", "x":7, "y":0}, | |||
{"label":"I", "x":8, "y":0}, | |||
{"label":"O", "x":9, "y":0}, | |||
{"label":"P", "x":10, "y":0}, | |||
{"label":"BSPC", "x":11, "y":0}, | |||
{"label":"Caps Lock", "x":0, "y":1, "w":1.5}, | |||
{"label":"A", "x":1.5, "y":1}, | |||
{"label":"S", "x":2.5, "y":1}, | |||
{"label":"D", "x":3.5, "y":1}, | |||
{"label":"F", "x":4.5, "y":1}, | |||
{"label":"G", "x":5.5, "y":1}, | |||
{"label":"H", "x":6.5, "y":1}, | |||
{"label":"J", "x":7.5, "y":1}, | |||
{"label":"K", "x":8.5, "y":1}, | |||
{"label":"L", "x":9.5, "y":1}, | |||
{"label":"Enter", "x":10.5, "y":1, "w":1.5}, | |||
{"label":"Shift", "x":0, "y":2, "w":1.75}, | |||
{"label":"Z", "x":1.75, "y":2}, | |||
{"label":"X", "x":2.75, "y":2}, | |||
{"label":"C", "x":3.75, "y":2}, | |||
{"label":"V", "x":4.75, "y":2}, | |||
{"label":"B", "x":5.75, "y":2}, | |||
{"label":"N", "x":6.75, "y":2}, | |||
{"label":"M", "x":7.75, "y":2}, | |||
{"label":",", "x":8.75, "y":2}, | |||
{"label":".", "x":9.75, "y":2}, | |||
{"label":"Shift", "x":10.75, "y":2, "w":1.25}, | |||
{"label":"Ctrl", "x":0, "y":3, "w":1.25}, | |||
{"label":"Win", "x":1.25, "y":3, "w":1}, | |||
{"label":"Alt", "x":2.25, "y":3, "w":1.25}, | |||
{"label":"Space", "x":3.5, "y":3, "w":2.25}, | |||
{"label":"Space", "x":5.75, "y":3, "w":2.75}, | |||
{"label":"App", "x":8.5, "y":3, "w":1.25}, | |||
{"label":"Fn", "x":9.75, "y":3, "w":1}, | |||
{"label":"Ctrl", "x":10.75, "y":3, "w":1.25} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,122 @@ | |||
/* Copyright 2021 DTIsaac | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#include "spi_master.h" | |||
#include "wait.h" | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_L1, | |||
_L2 | |||
}; | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
BASE, | |||
L1, | |||
BLE_DIS, // Disconnect BLE | |||
LED_EN, // Toggle LED | |||
}; | |||
#define L1 MO(_L1) | |||
const uint8_t cm1[] = "AT+GAPSTOPADV"; | |||
const uint8_t cm2[] = "AT+GAPDISCONNECT"; | |||
const uint8_t cm3[] = "ATZ"; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
LT(_L2,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_RALT, L1, KC_RCTL | |||
), | |||
[_L1] = LAYOUT( | |||
RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, | |||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, | |||
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[_L2] = LAYOUT( | |||
LED_EN, RGB_RMOD, KC_UP, RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, KC_TRNS, OUT_USB, OUT_BT, BLE_DIS, | |||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_BSLS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; | |||
void rgb_matrix_indicators_user(void) | |||
{ | |||
if (host_keyboard_led_state().caps_lock) | |||
{ | |||
rgb_matrix_set_color(22, 200, 200, 200); | |||
} | |||
if (IS_LAYER_ON(_L1)) | |||
{ | |||
rgb_matrix_set_color(35, 0, 200, 200); | |||
} | |||
if (IS_LAYER_ON(_L2)) | |||
{ | |||
rgb_matrix_set_color(22, 200, 0, 200); | |||
} | |||
} | |||
void sdep_send(const uint8_t *cmd, uint8_t len) { | |||
spi_start(AdafruitBleCSPin, false, 0, 2); | |||
uint8_t cnt = 200; | |||
bool ready = false; | |||
do { | |||
ready = spi_write(0x10) != 0xFE; | |||
if (ready) { | |||
break; | |||
} | |||
spi_stop(); | |||
wait_us(25); | |||
spi_start(AdafruitBleCSPin, false, 0, 2); | |||
} while (cnt--); | |||
if (ready) { | |||
spi_write(0x00); | |||
spi_write(0x0A); | |||
spi_write(len); | |||
spi_transmit(cmd, len); | |||
} | |||
spi_stop(); | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case LED_EN: | |||
if (record->event.pressed) { | |||
DDRB = DDRB ^ 0x20; | |||
PORTB &= ~(1 << 5); | |||
} | |||
return false; | |||
case BLE_DIS: | |||
if (record->event.pressed) { | |||
sdep_send(cm1,sizeof(cm1)); | |||
sdep_send(cm2,sizeof(cm2)); | |||
sdep_send(cm3,sizeof(cm3)); | |||
} | |||
return false; | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
# The default keymap for dosa40rgb |
@ -0,0 +1,25 @@ | |||
# dosa40rgb | |||
![dosa40rgb](https://i.imgur.com/NfuF82nh.jpg) | |||
A 40 percent keyboard dosa40rgb Bluetooth Low Energy | |||
* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac) | |||
* Hardware Supported: ATmega32U4 + AdafruitBLE SPI | |||
Make example for this keyboard (after setting up your build environment): | |||
make dtisaac/dosa40rgb:default | |||
Flashing example for this keyboard: | |||
make dtisaac/dosa40rgb:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 2 ways: | |||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | |||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available |
@ -0,0 +1,25 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = lufa-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
BLUETOOTH = AdafruitBLE # Enable Bluetooth | |||
RGB_MATRIX_ENABLE = yes | |||
RGB_MATRIX_DRIVER = WS2812 |
@ -0,0 +1,59 @@ | |||
/* Copyright 2021 DTIsaac | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layers { | |||
_LAYER0, | |||
_LAYER1, | |||
_LAYER2, | |||
_LAYER3, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAYER0] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_NO), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_LAYER1] = LAYOUT( | |||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLEP, KC_WAKE, KC_PWR, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_ON, BL_INC, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_OFF, BL_DEC, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT | |||
), | |||
[_LAYER2] = LAYOUT( | |||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[_LAYER3] = LAYOUT( | |||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for dtisaac01 |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |