@ -0,0 +1,142 @@ | |||
/* | |||
Copyright 2021 gtips | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x5C06 | |||
#define PRODUCT_ID 0x4F0D | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER gtips | |||
#define PRODUCT reviung5 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 1 | |||
#define MATRIX_COLS 5 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { F4 } | |||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Encoder */ | |||
#define ENCODERS_PAD_A { D0 } | |||
#define ENCODERS_PAD_B { D1 } | |||
#define RGB_DI_PIN D3 | |||
#ifdef RGB_DI_PIN | |||
# define RGBLED_NUM 4 | |||
# define RGBLIGHT_HUE_STEP 16 | |||
# define RGBLIGHT_SAT_STEP 16 | |||
# define RGBLIGHT_VAL_STEP 16 | |||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,18 @@ | |||
{ | |||
"keyboard_name": "reviung5", | |||
"url": "", | |||
"maintainer": "gtips", | |||
"width": 5, | |||
"height": 1, | |||
"layouts": { | |||
"LAYOUT_reviung5": { | |||
"layout": [ | |||
{"label": "k00", "x": 0, "y": 0}, | |||
{"label": "k01", "x": 1, "y": 0.25}, | |||
{"label": "k02", "x": 2, "y": 0.25}, | |||
{"label": "k03", "x": 3, "y": 0.25}, | |||
{"label": "k04", "x": 4, "y": 0} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,34 @@ | |||
/* Copyright 2021 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
}; | |||
#define LO_VD LT(_LOWER, KC_VOLD) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT_reviung5( | |||
LO_VD, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU | |||
), | |||
[_LOWER] = LAYOUT_reviung5( | |||
_______, RGB_HUI, RGB_MOD, RGB_TOG, KC_MUTE | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for reviung5 |
@ -0,0 +1,55 @@ | |||
/* Copyright 2021 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT_reviung5( | |||
TG(_LOWER), KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE | |||
), | |||
[_LOWER] = LAYOUT_reviung5( | |||
_______, LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), RGB_TOG | |||
) | |||
}; | |||
bool encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { | |||
if (IS_LAYER_ON(_LOWER)) { | |||
tap_code16((clockwise == true) ? KC_WH_D : KC_WH_U); | |||
} else { | |||
tap_code((clockwise == true) ? KC_VOLD : KC_VOLU); | |||
} | |||
} | |||
return true; | |||
} | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
switch (get_highest_layer(state)) { | |||
case _LOWER: | |||
rgblight_setrgb (RGB_GOLD); | |||
break; | |||
default: // for any other layers, or the default layer | |||
rgblight_setrgb (RGB_TEAL); | |||
break; | |||
} | |||
return state; | |||
} |
@ -0,0 +1,3 @@ | |||
# The default keymap for reviung5 | |||
## Use the Left Rotary Encoder |
@ -0,0 +1,55 @@ | |||
/* Copyright 2021 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT_reviung5( | |||
KC_MUTE, KC_MPRV, KC_MPLY, KC_MNXT, TG(_LOWER) | |||
), | |||
[_LOWER] = LAYOUT_reviung5( | |||
RGB_TOG, LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______ | |||
) | |||
}; | |||
bool encoder_update_user(uint8_t index, bool clockwise) { | |||
if (index == 0) { | |||
if (IS_LAYER_ON(_LOWER)) { | |||
tap_code16((clockwise == true) ? KC_WH_D : KC_WH_U); | |||
} else { | |||
tap_code((clockwise == true) ? KC_VOLD : KC_VOLU); | |||
} | |||
} | |||
return true; | |||
} | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
switch (get_highest_layer(state)) { | |||
case _LOWER: | |||
rgblight_setrgb (RGB_RED); | |||
break; | |||
default: // for any other layers, or the default layer | |||
rgblight_setrgb (RGB_TEAL); | |||
break; | |||
} | |||
return state; | |||
} |
@ -0,0 +1,4 @@ | |||
# The default keymap for reviung5 | |||
## Use the Right Rotary Encoder | |||
@ -0,0 +1,19 @@ | |||
# reviung5 | |||
![reviung5](https://github.com/gtips/reviung/blob/master/reviung5/image/reviung5-1.jpg) | |||
The REVIUNG5 is 5-key (or 4-key + Rotary Encoder) macropad. | |||
* Keyboard Maintainer: [gtips](https://github.com/gtips) | |||
* Hardware Supported: REVIUNG5 PCB. | |||
* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung5) | |||
Make example for this keyboard (after setting up your build environment): | |||
make reviung5:default | |||
Flashing example for this keyboard: | |||
make reviung5:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,17 @@ | |||
/* Copyright 2021 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "reviung5.h" |
@ -0,0 +1,33 @@ | |||
/* Copyright 2021 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_reviung5( \ | |||
K00, K01, K02, K03, K04 \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04 } \ | |||
} |
@ -0,0 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes |