* Added functions to read HSV values I have added three functions to rgb_light.c to be able to read the hue, saturation and value from other places. They are rgblight_get_hue(), rgblight_get_sat(), adn rgblight_get_val(). * Create keymap.c * Add COSPAD support to QMK I have ported the COSPAD numpad to qmk. * Update readme.md * Update cospad.cpull/2168/head
@ -0,0 +1,94 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER KPREPUBLIC | |||
#define PRODUCT COSPAD | |||
#define DESCRIPTION QMK keyboard firmware for COSPAD | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 4 | |||
// ROWS: Top to bottom, COLS: Left to right | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5 } | |||
#define MATRIX_COL_PINS { F0, F1, E6, C7 } | |||
#define UNUSED_PINS | |||
#define BACKLIGHT_PIN F7 | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
//#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* Backlight configuration | |||
*/ | |||
#define BACKLIGHT_LEVELS 4 | |||
/* Underlight configuration | |||
*/ | |||
#define RGB_DI_PIN F6 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 4 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,37 @@ | |||
#include "cospad.h" | |||
#include "led.h" | |||
extern inline void cospad_bl_led_on(void); | |||
extern inline void cospad_bl_led_off(void); | |||
extern inline void cospad_bl_led_togg(void); | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
led_init_ports(); | |||
}; | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
}; | |||
void led_init_ports(void) { | |||
// * Set our LED pins as output | |||
DDRB |= (1<<2); | |||
DDRF |= (1<<7); | |||
// * Setting BL LEDs to init as off | |||
PORTF |= (1<<7); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
if (usb_led & (1<<USB_LED_NUM_LOCK)) { | |||
// Turn numlock on | |||
PORTB &= ~(1<<2); | |||
} else { | |||
// Turn numlock off | |||
PORTB |= (1<<2); | |||
} | |||
} |
@ -0,0 +1,77 @@ | |||
#ifndef COSPAD_H | |||
#define COSPAD_H | |||
#include "quantum.h" | |||
// readability | |||
#define XXX KC_NO | |||
/* COSPAD ortho matrix layout | |||
* ,-------------------. | |||
* | 00 | 01 | 02 | 03 | | |||
* |----|----|----|----| | |||
* | 10 | 11 | 12 | 13 | | |||
* |----|----|----|----| | |||
* | 20 | 21 | 22 | 23 | | |||
* |----|----|----|----| | |||
* | 30 | 31 | 32 | 33 | | |||
* |----|----|----|----| | |||
* | 40 | 41 | 42 | 43 | | |||
* |----|----|----|----| | |||
* | 50 | 51 | 52 | 53 | | |||
* `-------------------' | |||
*/ | |||
/* COSPAD numpad matrix layout | |||
* ,-------------------. | |||
* | 00 | 01 | 02 | 03 | | |||
* |----|----|----|----| | |||
* | 10 | 11 | 12 | 13 | | |||
* |----|----|----|----| | |||
* | 20 | 21 | 22 | | | |||
* |----|----|----| 23 | | |||
* | 30 | 31 | 32 | | | |||
* |----|----|----|----| | |||
* | 40 | 41 | 42 | | | |||
* |----|----|----| 43 | | |||
* | 50 | 52 | | | |||
* `-------------------' | |||
*/ | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22, k23, \ | |||
k30, k31, k32, k33, \ | |||
k40, k41, k42, k43, \ | |||
k50, k51, k52, k53 \ | |||
) \ | |||
{ \ | |||
{k00, k01, k02, k03}, \ | |||
{k10, k11, k12, k13}, \ | |||
{k20, k21, k22, k23}, \ | |||
{k30, k31, k32, k33}, \ | |||
{k40, k41, k42, k43}, \ | |||
{k50, k51, k52, k53} \ | |||
} | |||
void matrix_init_user(void); | |||
void matrix_scan_user(void); | |||
/* | |||
inline void cospad_bl_led_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } | |||
inline void cospad_bl_led_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } | |||
*/ | |||
inline void cospad_bl_led_on(void) { PORTF &= ~(1<<7); } | |||
inline void cospad_bl_led_off(void) { PORTF |= (1<<7); } | |||
inline void cospad_bl_led_togg(void) { | |||
uint8_t bl_mask = PORTF&(1<<7); | |||
if (bl_mask) { | |||
PORTF &= ~(1<<7); | |||
} else { | |||
PORTF |= (1<<7); | |||
} | |||
} | |||
#endif |
@ -0,0 +1,91 @@ | |||
#include "cospad.h" | |||
#include "led.h" | |||
#ifdef RGBLIGHT_ENABLE | |||
#include "rgblight.h" | |||
#endif | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
#define _______ KC_TRNS | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,-------------------. | |||
* |Esc |TAB | FN | BS | | |||
* |----|----|----|----| | |||
* | NL | / | * | - | | |||
* |----|----|----|----| | |||
* | 7 | 8 | 9 | | | |||
* |----|----|----| + | | |||
* | 4 | 5 | 6 | | | |||
* |----|----|----|----| | |||
* | 1 | 2 | 3 | | | |||
* |----|----|----| En | | |||
* | 0 | . | | | |||
* `-------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
KC_ESC, KC_TAB, MO(_FL), KC_BSPC, \ | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ | |||
KC_P7, KC_P8, KC_P9, KC_PPLS, \ | |||
KC_P4, KC_P5, KC_P6, KC_NO, \ | |||
KC_P1, KC_P2, KC_P3, KC_PENT, \ | |||
KC_P0, KC_NO, KC_PDOT, KC_NO), | |||
/* Keymap _FL: Function Layer | |||
* ,-------------------. | |||
* |RGBT|TAB | FN | BS | | |||
* |----|----|----|----| | |||
* |RGBM|RGBP|BTOG| - | | |||
* |----|----|----|----| | |||
* |HUD |HUI |BON | | | |||
* |----|----|----| + | | |||
* |SAD |SAI |BOFF| | | |||
* |----|----|----|----| | |||
* |VAD |VAS | 3 | | | |||
* |----|----|----| En | | |||
* | 0 |RST | | | |||
* `-------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
RGB_TOG, KC_TAB, KC_TRNS, KC_BSPC, \ | |||
RGB_MOD, RGB_M_P, BL_TOGG, KC_PMNS, \ | |||
RGB_HUD, RGB_HUI, BL_ON, KC_PPLS, \ | |||
RGB_SAD, RGB_SAI, BL_OFF, KC_NO, \ | |||
RGB_VAD, RGB_VAI, KC_P3, KC_PENT, \ | |||
KC_P0, KC_NO, RESET, KC_NO), | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = MO(_FL), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case BL_TOGG: | |||
if (record->event.pressed) { | |||
cospad_bl_led_togg(); | |||
} | |||
return false; | |||
case BL_ON: | |||
if (record->event.pressed) { | |||
cospad_bl_led_on(); | |||
} | |||
return false; | |||
case BL_OFF: | |||
if(record->event.pressed) { | |||
cospad_bl_led_off(); | |||
} | |||
return false; | |||
default: | |||
return true; | |||
} | |||
} |
@ -0,0 +1,21 @@ | |||
COSPAD | |||
=== | |||
A DIY Keypad Kit sold by KPRepublic, runs TKG natively. | |||
Keyboard Maintainer: QMK Community | |||
Hardware Supported: COSPAD | |||
Hardware Availability: https://aliexpress.com/item/cospad-Custom-Mechanical-Keyboard-Kit-up-tp-24-keys-Supports-TKG-TOOLS-Underglow-RGB-PCB-20/32818383873.html | |||
Only supports on and off for the backlight leds, as they are not connected to a PWM pin. | |||
Supported Layouts: | |||
![Numpad Layout of COSPAD](https://i.imgur.com/t03lXJ4.png) | |||
![Ortholinear Layout of COSPAD](https://i.imgur.com/mliUcCc.png) | |||
Make example for this keyboard (after setting up your build environment): | |||
make cospad:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,66 @@ | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID |