mh
/
qmk_firmware
mirror of https://github.com/qmk/qmk_firmware/
1
0
Fork 0
Code Issues 0 Projects 0 Releases 1.6k Wiki Activity
Browse Source

Removing separate ergodox80 project. 

Created KEYMAP_80 in ez.h to support 80 key ergodoxes.
Creating default_80 keymap as ez keymap.
pull/715/head
profet23 7 years ago
parent
36e16b46e3
commit
1406118c71
21 changed files with 55 additions and 1930 deletions
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +41
    -0
      keyboards/ergodox/ez/ez.h
  2. BIN
      keyboards/ergodox/ez/keymaps/default_80/ergodox80.png
  3. +4
    -4
      keyboards/ergodox/ez/keymaps/default_80/keymap.c
  4. +10
    -0
      keyboards/ergodox/ez/keymaps/default_80/readme.md
  5. +0
    -5
      keyboards/ergodox80/Makefile
  6. +0
    -31
      keyboards/ergodox80/config.h
  7. +0
    -0
      keyboards/ergodox80/ergodox80.c
  8. +0
    -5
      keyboards/ergodox80/ergodox80.h
  9. +0
    -19
      keyboards/ergodox80/ergodox80/190hotfix.sh
  10. +0
    -3
      keyboards/ergodox80/ergodox80/Makefile
  11. +0
    -65
      keyboards/ergodox80/ergodox80/config.h
  12. +0
    -85
      keyboards/ergodox80/ergodox80/ergodox80.c
  13. +0
    -122
      keyboards/ergodox80/ergodox80/ergodox80.h
  14. +0
    -178
      keyboards/ergodox80/ergodox80/i2cmaster.h
  15. +0
    -382
      keyboards/ergodox80/ergodox80/matrix.c
  16. +0
    -76
      keyboards/ergodox80/ergodox80/rules.mk
  17. +0
    -208
      keyboards/ergodox80/ergodox80/twimaster.c
  18. +0
    -710
      keyboards/ergodox80/ergodox80/util/compile_keymap.py
  19. +0
    -3
      keyboards/ergodox80/ergodox80/util/readme.md
  20. +0
    -6
      keyboards/ergodox80/readme.md
  21. +0
    -28
      keyboards/ergodox80/rules.mk

+ 41
- 0
keyboards/ergodox/ez/ez.h View File

@ -119,4 +119,45 @@ inline void ergodox_led_all_set(uint8_t n)
{ k0D, k1D, k2D, k3D, k4D, KC_NO } \
}
#define KEYMAP_80( \
\
/* left hand, spatial positions */ \
k00,k01,k02,k03,k04,k05,k06, \
k10,k11,k12,k13,k14,k15,k16, \
k20,k21,k22,k23,k24,k25, \
k30,k31,k32,k33,k34,k35,k36, \
k40,k41,k42,k43,k44, \
k55,k56, \
k45,k46,k54, \
k53,k52,k51, \
\
/* right hand, spatial positions */ \
k07,k08,k09,k0A,k0B,k0C,k0D, \
k17,k18,k19,k1A,k1B,k1C,k1D, \
k28,k29,k2A,k2B,k2C,k2D, \
k37,k38,k39,k3A,k3B,k3C,k3D, \
k49,k4A,k4B,k4C,k4D, \
k57,k58, \
k59,k47,k48, \
k5C,k5B,k5A ) \
\
/* matrix positions */ \
{ \
{ k00, k10, k20, k30, k40, KC_NO }, \
{ k01, k11, k21, k31, k41, k51 }, \
{ k02, k12, k22, k32, k42, k52 }, \
{ k03, k13, k23, k33, k43, k53 }, \
{ k04, k14, k24, k34, k44, k54 }, \
{ k05, k15, k25, k35, k45, k55 }, \
{ k06, k16, KC_NO, k36, k46, k56 }, \
\
{ k07, k17, KC_NO, k37, k47, k57 }, \
{ k08, k18, k28, k38, k48, k58 }, \
{ k09, k19, k29, k39, k49, k59 }, \
{ k0A, k1A, k2A, k3A, k4A, k5A }, \
{ k0B, k1B, k2B, k3B, k4B, k5B }, \
{ k0C, k1C, k2C, k3C, k4C, k5C }, \
{ k0D, k1D, k2D, k3D, k4D, KC_NO } \
}
#endif

BIN
keyboards/ergodox/ez/keymaps/default_80/ergodox80.png View File

Before After
Width: 1141  |  Height: 435  |  Size: 20 KiB

keyboards/ergodox80/keymaps/default/keymap.c → keyboards/ergodox/ez/keymaps/default_80/keymap.c View File

@ -1,4 +1,4 @@
#include "ergodox80.h"
#include "ergodox.h"
#include "debug.h"
#include "action_layer.h"
#include "version.h"
@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
// If it accepts an argument (i.e, is a function), it doesn't need KC_.
// Otherwise, it needs KC_*
[BASE] = KEYMAP( // layer 0 : default
[BASE] = KEYMAP_80( // layer 0 : default
// left hand
KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT,
KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB),
@ -73,7 +73,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `--------------------' `--------------------'
*/
// SYMBOLS
[SYMB] = KEYMAP(
[SYMB] = KEYMAP_80(
// left hand
M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
@ -115,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `--------------------' `------------------------'
*/
// MEDIA AND MOUSE
[MDIA] = KEYMAP(
[MDIA] = KEYMAP_80(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,

+ 10
- 0
keyboards/ergodox/ez/keymaps/default_80/readme.md View File

@ -0,0 +1,10 @@
# ErgoDox 80 Default Configuration
This is based on the default Ergodox EZ keymap.
The difference is that this keymap supports 80 key layouts.
If you own an 80 key Ergodox, use this as an example to get your desired keymap.
**NOTE:** This layout is not physically supported by the Ergodox EZ.
![Default80](ergodox80.png)

+ 0
- 5
keyboards/ergodox80/Makefile View File

@ -1,5 +0,0 @@
SUBPROJECT_DEFAULT = ergodox80
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif

+ 0
- 31
keyboards/ergodox80/config.h View File

@ -1,31 +0,0 @@
#ifndef KEYBOARDS_ERGODOX_CONFIG_H_
#define KEYBOARDS_ERGODOX_CONFIG_H_
#define MOUSEKEY_DELAY 100
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_MAX_SPEED 3
#define MOUSEKEY_TIME_TO_MAX 10
#define TAPPING_TOGGLE 1
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
#define TAPPING_TERM 200
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
#include "ergodox80/config.h"
#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */

+ 0
- 0
keyboards/ergodox80/ergodox80.c View File


+ 0
- 5
keyboards/ergodox80/ergodox80.h View File

@ -1,5 +0,0 @@
#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
#define KEYBOARDS_ERGODOX_ERGODOX_H_
#include "ergodox80.h"
#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */

+ 0
- 19
keyboards/ergodox80/ergodox80/190hotfix.sh View File

@ -1,19 +0,0 @@
#!/bin/bash
#a tool to fix broken keymaps as a result of pull request #190
#changing the declaration of matrix_scan_user() and matrix_init_user()
#
#This script will save a copy of the specified keymap as keymap.c.bak
#and then create a new keymap.c with the definion corrected.
#this script must be run from the ergodox_ez directory
if [ $# -ne 1 ]; then
echo $0: usage: ./190hotfix keymap_name
exit 1
fi
echo Saving backup as ./keymaps/$1/keymap.c.bak ...
mv ./keymaps/$1/keymap.c ./keymaps/$1/keymap.c.bak
echo Modifying ./keymaps/$1/keymap.c ...
cat ./keymaps/$1/keymap.c.bak | sed -r 's/^void \* matrix_/void matrix_/'>./keymaps/$1/keymap.c
echo Complete!

+ 0
- 3
keyboards/ergodox80/ergodox80/Makefile View File

@ -1,3 +0,0 @@
ifndef MAKEFILE_INCLUDED
include ../../../Makefile
endif

+ 0
- 65
keyboards/ergodox80/ergodox80/config.h View File

@ -1,65 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef ERGODOX_EZ_CONFIG_H
#define ERGODOX_EZ_CONFIG_H
#include "../config.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1307
#define DEVICE_VER 0x0001
#define MANUFACTURER ErgoDox EZ
#define PRODUCT ErgoDox EZ
#define DESCRIPTION QMK keyboard firmware for Ergodox EZ
/* key matrix size */
#define MATRIX_ROWS 14
#define MATRIX_COLS 6
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
#define LED_BRIGHTNESS_LO 15
#define LED_BRIGHTNESS_HI 255
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
//#define DEBUG_MATRIX_SCAN_RATE
#endif

+ 0
- 85
keyboards/ergodox80/ergodox80/ergodox80.c View File

@ -1,85 +0,0 @@
#include "ergodox80.h"
#include "i2cmaster.h"
bool i2c_initialized = 0;
uint8_t mcp23018_status = 0x20;
void matrix_init_kb(void) {
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
TCCR1A = 0b10101001; // set and configure fast PWM
TCCR1B = 0b00001001; // set and configure fast PWM
// (tied to Vcc for hardware convenience)
DDRB &= ~(1<<4); // set B(4) as input
PORTB &= ~(1<<4); // set B(4) internal pull-up disabled
// unused pins - C7, D4, D5, D7, E6
// set as input with internal pull-ip enabled
DDRC &= ~(1<<7);
DDRD &= ~(1<<7 | 1<<5 | 1<<4);
DDRE &= ~(1<<6);
PORTC |= (1<<7);
PORTD |= (1<<7 | 1<<5 | 1<<4);
PORTE |= (1<<6);
ergodox_blink_all_leds();
matrix_init_user();
}
void ergodox_blink_all_leds(void)
{
ergodox_led_all_off();
ergodox_led_all_set(LED_BRIGHTNESS_HI);
ergodox_right_led_1_on();
_delay_ms(50);
ergodox_right_led_2_on();
_delay_ms(50);
ergodox_right_led_3_on();
_delay_ms(50);
ergodox_right_led_1_off();
_delay_ms(50);
ergodox_right_led_2_off();
_delay_ms(50);
ergodox_right_led_3_off();
//ergodox_led_all_on();
//_delay_ms(333);
ergodox_led_all_off();
}
uint8_t init_mcp23018(void) {
mcp23018_status = 0x20;
// I2C subsystem
if (i2c_initialized == 0) {
i2c_init(); // on pins D(1,0)
i2c_initialized++;
_delay_ms(1000);
}
// set pin direction
// - unused : input : 1
// - input : input : 1
// - driving : output : 0
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
i2c_stop();
// set pull-up
// - unused : on : 1
// - input : on : 1
// - driving : off : 0
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
out:
i2c_stop();
return mcp23018_status;
}

+ 0
- 122
keyboards/ergodox80/ergodox80/ergodox80.h View File

@ -1,122 +0,0 @@
#ifndef ERGODOX_EZ_H
#define ERGODOX_EZ_H
#include "quantum.h"
#include <stdint.h>
#include <stdbool.h>
#include "i2cmaster.h"
#include <util/delay.h>
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
#define CPU_16MHz 0x00
// I2C aliases and register addresses (see "mcp23018.md")
#define I2C_ADDR 0b0100000
#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE )
#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ )
#define IODIRA 0x00 // i/o direction register
#define IODIRB 0x01
#define GPPUA 0x0C // GPIO pull-up resistor register
#define GPPUB 0x0D
#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT)
#define GPIOB 0x13
#define OLATA 0x14 // output latch register
#define OLATB 0x15
extern uint8_t mcp23018_status;
void init_ergodox(void);
void ergodox_blink_all_leds(void);
uint8_t init_mcp23018(void);
uint8_t ergodox_left_leds_update(void);
#define LED_BRIGHTNESS_LO 15
#define LED_BRIGHTNESS_HI 255
inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); }
inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); }
inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); }
inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); }
inline void ergodox_right_led_on(uint8_t led) { DDRB |= (1<<(led+4)); PORTB |= (1<<(led+4)); }
inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); }
inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); }
inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); }
inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); }
inline void ergodox_right_led_off(uint8_t led) { DDRB &= ~(1<<(led+4)); PORTB &= ~(1<<(led+4)); }
inline void ergodox_led_all_on(void)
{
ergodox_board_led_on();
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
}
inline void ergodox_led_all_off(void)
{
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
}
inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; }
inline void ergodox_right_led_2_set(uint8_t n) { OCR1B = n; }
inline void ergodox_right_led_3_set(uint8_t n) { OCR1C = n; }
inline void ergodox_right_led_set(uint8_t led, uint8_t n) {
(led == 1) ? (OCR1A = n) :
(led == 2) ? (OCR1B = n) :
(OCR1C = n);
}
inline void ergodox_led_all_set(uint8_t n)
{
ergodox_right_led_1_set(n);
ergodox_right_led_2_set(n);
ergodox_right_led_3_set(n);
}
#define KEYMAP( \
\
/* left hand, spatial positions */ \
k00,k01,k02,k03,k04,k05,k06, \
k10,k11,k12,k13,k14,k15,k16, \
k20,k21,k22,k23,k24,k25, \
k30,k31,k32,k33,k34,k35,k36, \
k40,k41,k42,k43,k44, \
k55,k56, \
k45,k46,k54, \
k53,k52,k51, \
\
/* right hand, spatial positions */ \
k07,k08,k09,k0A,k0B,k0C,k0D, \
k17,k18,k19,k1A,k1B,k1C,k1D, \
k28,k29,k2A,k2B,k2C,k2D, \
k37,k38,k39,k3A,k3B,k3C,k3D, \
k49,k4A,k4B,k4C,k4D, \
k57,k58, \
k59,k47,k48, \
k5C,k5B,k5A ) \
\
/* matrix positions */ \
{ \
{ k00, k10, k20, k30, k40, KC_NO }, \
{ k01, k11, k21, k31, k41, k51 }, \
{ k02, k12, k22, k32, k42, k52 }, \
{ k03, k13, k23, k33, k43, k53 }, \
{ k04, k14, k24, k34, k44, k54 }, \
{ k05, k15, k25, k35, k45, k55 }, \
{ k06, k16, KC_NO, k36, k46, k56 }, \
\
{ k07, k17, KC_NO, k37, k47, k57 }, \
{ k08, k18, k28, k38, k48, k58 }, \
{ k09, k19, k29, k39, k49, k59 }, \
{ k0A, k1A, k2A, k3A, k4A, k5A }, \
{ k0B, k1B, k2B, k3B, k4B, k5B }, \
{ k0C, k1C, k2C, k3C, k4C, k5C }, \
{ k0D, k1D, k2D, k3D, k4D, KC_NO } \
}
#endif

+ 0
- 178
keyboards/ergodox80/ergodox80/i2cmaster.h View File

@ -1,178 +0,0 @@
#ifndef _I2CMASTER_H
#define _I2CMASTER_H 1
/*************************************************************************
* Title: C include file for the I2C master interface
* (i2cmaster.S or twimaster.c)
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device
* Usage: see Doxygen manual
**************************************************************************/
#ifdef DOXYGEN
/**
@defgroup pfleury_ic2master I2C Master library
@code #include <i2cmaster.h> @endcode
@brief I2C (TWI) Master Software Library
Basic routines for communicating with I2C slave devices. This single master
implementation is limited to one bus master on the I2C bus.
This I2c library is implemented as a compact assembler software implementation of the I2C protocol
which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c).
Since the API for these two implementations is exactly the same, an application can be linked either against the
software I2C implementation or the hardware I2C implementation.
Use 4.7k pull-up resistor on the SDA and SCL pin.
Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module
i2cmaster.S to your target when using the software I2C implementation !
Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion.
@note
The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted
to GNU assembler and AVR-GCC C call interface.
Replaced the incorrect quarter period delays found in AVR300 with
half period delays.
@author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
@par API Usage Example
The following code shows typical usage of this library, see example test_i2cmaster.c
@code
#include <i2cmaster.h>
#define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet
int main(void)
{
unsigned char ret;
i2c_init(); // initialize I2C library
// write 0x75 to EEPROM address 5 (Byte Write)
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_write(0x75); // write value 0x75 to EEPROM
i2c_stop(); // set stop conditon = release bus
// read previously written value back from EEPROM address 5
i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode
i2c_write(0x05); // write address = 5
i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode
ret = i2c_readNak(); // read one byte from EEPROM
i2c_stop();
for(;;);
}
@endcode
*/
#endif /* DOXYGEN */
/**@{*/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
#include <avr/io.h>
/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_READ 1
/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */
#define I2C_WRITE 0
/**
@brief initialize the I2C master interace. Need to be called only once
@param void
@return none
*/
extern void i2c_init(void);
/**
@brief Terminates the data transfer and releases the I2C bus
@param void
@return none
*/
extern void i2c_stop(void);
/**
@brief Issues a start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
extern unsigned char i2c_start(unsigned char addr);
/**
@brief Issues a repeated start condition and sends address and transfer direction
@param addr address and transfer direction of I2C device
@retval 0 device accessible
@retval 1 failed to access device
*/
extern unsigned char i2c_rep_start(unsigned char addr);
/**
@brief Issues a start condition and sends address and transfer direction
If device is busy, use ack polling to wait until device ready
@param addr address and transfer direction of I2C device
@return none
*/
extern void i2c_start_wait(unsigned char addr);
/**
@brief Send one byte to I2C device
@param data byte to be transfered
@retval 0 write successful
@retval 1 write failed
*/
extern unsigned char i2c_write(unsigned char data);
/**
@brief read one byte from the I2C device, request more data from device
@return byte read from I2C device
*/
extern unsigned char i2c_readAck(void);
/**
@brief read one byte from the I2C device, read is followed by a stop condition
@return byte read from I2C device
*/
extern unsigned char i2c_readNak(void);
/**
@brief read one byte from the I2C device
Implemented as a macro, which calls either i2c_readAck or i2c_readNak
@param ack 1 send ack, request more data from device<br>
0 send nak, read is followed by a stop condition
@return byte read from I2C device
*/
extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
/**@}*/
#endif

+ 0
- 382
keyboards/ergodox80/ergodox80/matrix.c View File

@ -1,382 +0,0 @@
/*
Note for ErgoDox EZ customizers: Here be dragons!
This is not a file you want to be messing with.
All of the interesting stuff for you is under keymaps/ :)
Love, Erez
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "action_layer.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "ergodox80.h"
#include "i2cmaster.h"
#ifdef DEBUG_MATRIX_SCAN_RATE
#include "timer.h"
#endif
/*
* This constant define not debouncing time in msecs, but amount of matrix
* scan loops which should be made to get stable debounced results.
*
* On Ergodox matrix scan rate is relatively low, because of slow I2C.
* Now it's only 317 scans/second, or about 3.15 msec/scan.
* According to Cherry specs, debouncing time is 5 msec.
*
* And so, there is no sense to have DEBOUNCE higher than 2.
*/
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(uint8_t row);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
static uint8_t mcp23018_reset_loop;
#ifdef DEBUG_MATRIX_SCAN_RATE
uint32_t matrix_timer;
uint32_t matrix_scan_count;
#endif
__attribute__ ((weak))
void matrix_init_user(void) {}
__attribute__ ((weak))
void matrix_scan_user(void) {}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
// initialize row and col
mcp23018_status = init_mcp23018();
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_timer = timer_read32();
matrix_scan_count = 0;
#endif
matrix_init_kb();
}
void matrix_power_up(void) {
mcp23018_status = init_mcp23018();
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_timer = timer_read32();
matrix_scan_count = 0;
#endif
}
uint8_t matrix_scan(void)
{
if (mcp23018_status) { // if there was an error
if (++mcp23018_reset_loop == 0) {
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
// this will be approx bit more frequent than once per second
print("trying to reset mcp23018\n");
mcp23018_status = init_mcp23018();
if (mcp23018_status) {
print("left side not responding\n");
} else {
print("left side attached\n");
ergodox_blink_all_leds();
}
}
}
#ifdef DEBUG_MATRIX_SCAN_RATE
matrix_scan_count++;
uint32_t timer_now = timer_read32();
if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
print("matrix scan frequency: ");
pdec(matrix_scan_count);
print("\n");
matrix_timer = timer_now;
matrix_scan_count = 0;
}
#endif
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
wait_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols(i);
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
wait_us(1);
// this should be wait_ms(1) but has been left as-is at EZ's request
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
matrix_scan_quantum();
return 1;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
/* Column pin configuration
*
* Teensy
* col: 0 1 2 3 4 5
* pin: F0 F1 F4 F5 F6 F7
*
* MCP23018
* col: 0 1 2 3 4 5
* pin: B5 B4 B3 B2 B1 B0
*/
static void init_cols(void)
{
// init on mcp23018
// not needed, already done as part of init_mcp23018()
// init on teensy
// Input with pull-up(DDR:0, PORT:1)
DDRF &= ~(1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
PORTF |= (1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
}
static matrix_row_t read_cols(uint8_t row)
{
if (row < 7) {
if (mcp23018_status) { // if there was an error
return 0;
} else {
uint8_t data = 0;
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out;
data = i2c_readNak();
data = ~data;
out:
i2c_stop();
return data;
}
} else {
// read from teensy
return
(PINF&(1<<0) ? 0 : (1<<0)) |
(PINF&(1<<1) ? 0 : (1<<1)) |
(PINF&(1<<4) ? 0 : (1<<2)) |
(PINF&(1<<5) ? 0 : (1<<3)) |
(PINF&(1<<6) ? 0 : (1<<4)) |
(PINF&(1<<7) ? 0 : (1<<5)) ;
}
}
/* Row pin configuration
*
* Teensy
* row: 7 8 9 10 11 12 13
* pin: B0 B1 B2 B3 D2 D3 C6
*
* MCP23018
* row: 0 1 2 3 4 5 6
* pin: A0 A1 A2 A3 A4 A5 A6
*/
static void unselect_rows(void)
{
// unselect on mcp23018
if (mcp23018_status) { // if there was an error
// do nothing
} else {
// set all rows hi-Z : 1
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write( 0xFF
& ~(0<<7)
); if (mcp23018_status) goto out;
out:
i2c_stop();
}
// unselect on teensy
// Hi-Z(DDR:0, PORT:0) to unselect
DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
DDRD &= ~(1<<2 | 1<<3);
PORTD &= ~(1<<2 | 1<<3);
DDRC &= ~(1<<6);
PORTC &= ~(1<<6);
}
static void select_row(uint8_t row)
{
if (row < 7) {
// select on mcp23018
if (mcp23018_status) { // if there was an error
// do nothing
} else {
// set active row low : 0
// set other rows hi-Z : 1
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOA); if (mcp23018_status) goto out;
mcp23018_status = i2c_write( 0xFF & ~(1<<row)
& ~(0<<7)
); if (mcp23018_status) goto out;
out:
i2c_stop();
}
} else {
// select on teensy
// Output low(DDR:1, PORT:0) to select
switch (row) {
case 7:
DDRB |= (1<<0);
PORTB &= ~(1<<0);
break;
case 8:
DDRB |= (1<<1);
PORTB &= ~(1<<1);
break;
case 9:
DDRB |= (1<<2);
PORTB &= ~(1<<2);
break;
case 10:
DDRB |= (1<<3);
PORTB &= ~(1<<3);
break;
case 11:
DDRD |= (1<<2);
PORTD &= ~(1<<3);
break;
case 12:
DDRD |= (1<<3);
PORTD &= ~(1<<3);
break;
case 13:
DDRC |= (1<<6);
PORTC &= ~(1<<6);
break;
}
}
}

+ 0
- 76
keyboards/ergodox80/ergodox80/rules.mk View File

@ -1,76 +0,0 @@
#----------------------------------------------------------------------------
# On command line:
#
# make = Make software.
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
#----------------------------------------------------------------------------
# # project specific files
SRC = twimaster.c \
matrix.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# comment out to disable the options.
#
ifndef QUANTUM_DIR
include ../../../Makefile
endif

+ 0
- 208
keyboards/ergodox80/ergodox80/twimaster.c View File

@ -1,208 +0,0 @@
/*************************************************************************
* Title: I2C master library using hardware TWI interface
* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
* File: $Id: twimaster.c,v 1.3 2005/07/02 11:14:21 Peter Exp $
* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
* Target: any AVR device with hardware TWI
* Usage: API compatible with I2C Software Library i2cmaster.h
**************************************************************************/
#include <inttypes.h>
#include <compat/twi.h>
#include <i2cmaster.h>
/* define CPU frequency in Mhz here if not defined in Makefile */
#ifndef F_CPU
#define F_CPU 16000000UL
#endif
/* I2C clock in Hz */
#define SCL_CLOCK 400000L
/*************************************************************************
Initialization of the I2C bus interface. Need to be called only once
*************************************************************************/
void i2c_init(void)
{
/* initialize TWI clock
* minimal values in Bit Rate Register (TWBR) and minimal Prescaler
* bits in the TWI Status Register should give us maximal possible
* I2C bus speed - about 444 kHz
*
* for more details, see 20.5.2 in ATmega16/32 secification
*/
TWSR = 0; /* no prescaler */
TWBR = 10; /* must be >= 10 for stable operation */
}/* i2c_init */
/*************************************************************************
Issues a start condition and sends address and transfer direction.
return 0 = device accessible, 1= failed to access device
*************************************************************************/
unsigned char i2c_start(unsigned char address)
{
uint8_t twst;
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) return 1;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed and ACK/NACK has been received
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
return 0;
}/* i2c_start */
/*************************************************************************
Issues a start condition and sends address and transfer direction.
If device is busy, use ack polling to wait until device is ready
Input: address and transfer direction of I2C device
*************************************************************************/
void i2c_start_wait(unsigned char address)
{
uint8_t twst;
while ( 1 )
{
// send START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst != TW_START) && (twst != TW_REP_START)) continue;
// send device address
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
// wail until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits.
twst = TW_STATUS & 0xF8;
if ( (twst == TW_MT_SLA_NACK )||(twst ==TW_MR_DATA_NACK) )
{
/* device busy, send stop condition to terminate write operation */
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
continue;
}
//if( twst != TW_MT_SLA_ACK) return 1;
break;
}
}/* i2c_start_wait */
/*************************************************************************
Issues a repeated start condition and sends address and transfer direction
Input: address and transfer direction of I2C device
Return: 0 device accessible
1 failed to access device
*************************************************************************/
unsigned char i2c_rep_start(unsigned char address)
{
return i2c_start( address );
}/* i2c_rep_start */
/*************************************************************************
Terminates the data transfer and releases the I2C bus
*************************************************************************/
void i2c_stop(void)
{
/* send stop condition */
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
// wait until stop condition is executed and bus released
while(TWCR & (1<<TWSTO));
}/* i2c_stop */
/*************************************************************************
Send one byte to I2C device
Input: byte to be transfered
Return: 0 write successful
1 write failed
*************************************************************************/
unsigned char i2c_write( unsigned char data )
{
uint8_t twst;
// send data to the previously addressed device
TWDR = data;
TWCR = (1<<TWINT) | (1<<TWEN);
// wait until transmission completed
while(!(TWCR & (1<<TWINT)));
// check value of TWI Status Register. Mask prescaler bits
twst = TW_STATUS & 0xF8;
if( twst != TW_MT_DATA_ACK) return 1;
return 0;
}/* i2c_write */
/*************************************************************************
Read one byte from the I2C device, request more data from device
Return: byte read from I2C device
*************************************************************************/
unsigned char i2c_readAck(void)
{
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
while(!(TWCR & (1<<TWINT)));
return TWDR;
}/* i2c_readAck */
/*************************************************************************
Read one byte from the I2C device, read is followed by a stop condition
Return: byte read from I2C device
*************************************************************************/
unsigned char i2c_readNak(void)
{
TWCR = (1<<TWINT) | (1<<TWEN);
while(!(TWCR & (1<<TWINT)));
return TWDR;
}/* i2c_readNak */

+ 0
- 710
keyboards/ergodox80/ergodox80/util/compile_keymap.py View File

@ -1,710 +0,0 @@
#!/usr/bin/env python
# -*- coding: utf-8 -*-
"""Compiler for keymap.c files
This scrip will generate a keymap.c file from a simple
markdown file with a specific layout.
Usage:
python compile_keymap.py INPUT_PATH [OUTPUT_PATH]
"""
from __future__ import division
from __future__ import print_function
from __future__ import absolute_import
from __future__ import unicode_literals
import os
import io
import re
import sys
import json
import unicodedata
import collections
import itertools as it
PY2 = sys.version_info.major == 2
if PY2:
chr = unichr
KEYBOARD_LAYOUTS = {
# These map positions in the parsed layout to
# positions in the KEYMAP MATRIX
'ergodox_ez': [
[ 0, 1, 2, 3, 4, 5, 6], [38, 39, 40, 41, 42, 43, 44],
[ 7, 8, 9, 10, 11, 12, 13], [45, 46, 47, 48, 49, 50, 51],
[14, 15, 16, 17, 18, 19 ], [ 52, 53, 54, 55, 56, 57],
[20, 21, 22, 23, 24, 25, 26], [58, 59, 60, 61, 62, 63, 64],
[27, 28, 29, 30, 31 ], [ 65, 66, 67, 68, 69],
[ 32, 33], [70, 71 ],
[ 34], [72 ],
[ 35, 36, 37], [73, 74, 75 ],
]
}
ROW_INDENTS = {
'ergodox_ez': [0, 0, 0, 0, 0, 1, 0, 0, 0, 2, 5, 0, 6, 0, 4, 0]
}
BLANK_LAYOUTS = [
# Compact Layout
"""
.------------------------------------.------------------------------------.
| | | | | | | | | | | | | | |
!-----+----+----+----+----+----------!-----+----+----+----+----+----+-----!
| | | | | | | | | | | | | | |
!-----+----+----+----x----x----! ! !----x----x----+----+----+-----!
| | | | | | |-----!-----! | | | | | |
!-----+----+----+----x----x----! ! !----x----x----+----+----+-----!
| | | | | | | | | | | | | | |
'-----+----+----+----+----+----------'----------+----+----+----+----+-----'
| | | | | | ! | | | | |
'------------------------' '------------------------'
.-----------. .-----------.
| | | ! | |
.-----+-----+-----! !-----+-----+-----.
! ! | | ! | ! !
! ! !-----! !-----! ! !
| | | | ! | | |
'-----------------' '-----------------'
""",
# Wide Layout
"""
.---------------------------------------------. .---------------------------------------------.
| | | | | | | | ! | | | | | | |
!-------+-----+-----+-----+-----+-------------! !-------+-----+-----+-----+-----+-----+-------!
| | | | | | | | ! | | | | | | |
!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------!
| | | | | | |-------! !-------! | | | | | |
!-------+-----+-----+-----x-----x-----! ! ! !-----x-----x-----+-----+-----+-------!
| | | | | | | | ! | | | | | | |
'-------+-----+-----+-----+-----+-------------' '-------------+-----+-----+-----+-----+-------'
| | | | | | ! | | | | |
'------------------------------' '------------------------------'
.---------------. .---------------.
| | | ! | |
.-------+-------+-------! !-------+-------+-------.
! ! | | ! | ! !
! ! !-------! !-------! ! !
| | | | ! | | |
'-----------------------' '-----------------------'
""",
]
DEFAULT_CONFIG = {
"keymaps_includes": [
"keymap_common.h",
],
'filler': "-+.'!:x",
'separator': "|",
'default_key_prefix': ["KC_"],
}
SECTIONS = [
'layout_config',
'layers',
]
# Markdown Parsing
ONELINE_COMMENT_RE = re.compile(r"""
^ # comment must be at the start of the line
\s* # arbitrary whitespace
// # start of the comment
(.*) # the comment
$ # until the end of line
""", re.MULTILINE | re.VERBOSE
)
INLINE_COMMENT_RE = re.compile(r"""
([\,\"\[\]\{\}\d]) # anythig that might end a expression
\s+ # comment must be preceded by whitespace
// # start of the comment
\s # and succeded by whitespace
(?:[^\"\]\}\{\[]*) # the comment (except things which might be json)
$ # until the end of line
""", re.MULTILINE | re.VERBOSE)
TRAILING_COMMA_RE = re.compile(r"""
, # the comma
(?:\s*) # arbitrary whitespace
$ # only works if the trailing comma is followed by newline
(\s*) # arbitrary whitespace
([\]\}]) # end of an array or object
""", re.MULTILINE | re.VERBOSE)
def loads(raw_data):
if isinstance(raw_data, bytes):
raw_data = raw_data.decode('utf-8')
raw_data = ONELINE_COMMENT_RE.sub(r"", raw_data)
raw_data = INLINE_COMMENT_RE.sub(r"\1", raw_data)
raw_data = TRAILING_COMMA_RE.sub(r"\1\2", raw_data)
return json.loads(raw_data)
def parse_config(path):
def reset_section():
section.update({
'name': section.get('name', ""),
'sub_name': "",
'start_line': -1,
'end_line': -1,
'code_lines': [],
})
def start_section(line_index, line):
end_section()
if line.startswith("# "):
name = line[2:]
elif line.startswith("## "):
name = line[3:]
else:
name = ""
name = name.strip().replace(" ", "_").lower()
if name in SECTIONS:
section['name'] = name
else:
section['sub_name'] = name
section['start_line'] = line_index
def end_section():
if section['start_line'] >= 0:
if section['name'] == 'layout_config':
config.update(loads("\n".join(
section['code_lines']
)))
elif section['sub_name'].startswith('layer'):
layer_name = section['sub_name']
config['layer_lines'][layer_name] = section['code_lines']
reset_section()
def amend_section(line_index, line):
section['end_line'] = line_index
section['code_lines'].append(line)
config = DEFAULT_CONFIG.copy()
config.update({
'layer_lines': collections.OrderedDict(),
'macro_ids': {'UM'},
'unicode_macros': {},
})
section = {}
reset_section()
with io.open(path, encoding="utf-8") as fh:
for i, line in enumerate(fh):
if line.startswith("#"):
start_section(i, line)
elif line.startswith(" "):
amend_section(i, line[4:])
else:
# TODO: maybe parse description
pass
end_section()
assert 'layout' in config
return config
# header file parsing
IF0_RE = re.compile(r"""
^
#if 0
$.*?
#endif
""", re.MULTILINE | re.DOTALL | re.VERBOSE)
COMMENT_RE = re.compile(r"""
/\*
.*?
\*/"
""", re.MULTILINE | re.DOTALL | re.VERBOSE)
def read_header_file(path):
with io.open(path, encoding="utf-8") as fh:
data = fh.read()
data, _ = COMMENT_RE.subn("", data)
data, _ = IF0_RE.subn("", data)
return data
def regex_partial(re_str_fmt, flags):
def partial(*args, **kwargs):
re_str = re_str_fmt.format(*args, **kwargs)
return re.compile(re_str, flags)
return partial
KEYDEF_REP = regex_partial(r"""
#define
\s
(
(?:{}) # the prefixes
(?:\w+) # the key name
) # capture group end
""", re.MULTILINE | re.DOTALL | re.VERBOSE)
ENUM_RE = re.compile(r"""
(
enum
\s\w+\s
\{
.*? # the enum content
\}
;
) # capture group end
""", re.MULTILINE | re.DOTALL | re.VERBOSE)
ENUM_KEY_REP = regex_partial(r"""
(
{} # the prefixes
\w+ # the key name
) # capture group end
""", re.MULTILINE | re.DOTALL | re.VERBOSE)
def parse_keydefs(config, data):
prefix_options = "|".join(config['key_prefixes'])
keydef_re = KEYDEF_REP(prefix_options)
enum_key_re = ENUM_KEY_REP(prefix_options)
for match in keydef_re.finditer(data):
yield match.groups()[0]
for enum_match in ENUM_RE.finditer(data):
enum = enum_match.groups()[0]
for key_match in enum_key_re.finditer(enum):
yield key_match.groups()[0]
def parse_valid_keys(config, out_path):
basepath = os.path.abspath(os.path.join(os.path.dirname(out_path)))
dirpaths = []
subpaths = []
while len(subpaths) < 6:
path = os.path.join(basepath, *subpaths)
dirpaths.append(path)
dirpaths.append(os.path.join(path, "tmk_core", "common"))
dirpaths.append(os.path.join(path, "quantum"))
subpaths.append('..')
includes = set(config['keymaps_includes'])
includes.add("keycode.h")
valid_keycodes = set()
for dirpath, include in it.product(dirpaths, includes):
include_path = os.path.join(dirpath, include)
if os.path.exists(include_path):
header_data = read_header_file(include_path)
valid_keycodes.update(
parse_keydefs(config, header_data)
)
return valid_keycodes
# Keymap Parsing
def iter_raw_codes(layer_lines, filler, separator):
filler_re = re.compile("[" + filler + " ]")
for line in layer_lines:
line, _ = filler_re.subn("", line.strip())
if not line:
continue
codes = line.split(separator)
for code in codes[1:-1]:
yield code
def iter_indexed_codes(raw_codes, key_indexes):
key_rows = {}
key_indexes_flat = []
for row_index, key_indexes in enumerate(key_indexes):
for key_index in key_indexes:
key_rows[key_index] = row_index
key_indexes_flat.extend(key_indexes)
assert len(raw_codes) == len(key_indexes_flat)
for raw_code, key_index in zip(raw_codes, key_indexes_flat):
# we keep track of the row mostly for layout purposes
yield raw_code, key_index, key_rows[key_index]
LAYER_CHANGE_RE = re.compile(r"""
(DF|TG|MO)\(\d+\)
""", re.VERBOSE)
MACRO_RE = re.compile(r"""
M\(\w+\)
""", re.VERBOSE)
UNICODE_RE = re.compile(r"""
U[0-9A-F]{4}
""", re.VERBOSE)
NON_CODE = re.compile(r"""
^[^A-Z0-9_]$
""", re.VERBOSE)
def parse_uni_code(raw_code):
macro_id = "UC_" + (
unicodedata.name(raw_code)
.replace(" ", "_")
.replace("-", "_")
)
code = "M({})".format(macro_id)
uc_hex = "{:04X}".format(ord(raw_code))
return code, macro_id, uc_hex
def parse_key_code(raw_code, key_prefixes, valid_keycodes):
if raw_code in valid_keycodes:
return raw_code
for prefix in key_prefixes:
code = prefix + raw_code
if code in valid_keycodes:
return code
def parse_code(raw_code, key_prefixes, valid_keycodes):
if not raw_code:
return 'KC_TRNS', None, None
if LAYER_CHANGE_RE.match(raw_code):
return raw_code, None, None
if MACRO_RE.match(raw_code):
macro_id = raw_code[2:-1]
return raw_code, macro_id, None
if UNICODE_RE.match(raw_code):
hex_code = raw_code[1:]
return parse_uni_code(chr(int(hex_code, 16)))
if NON_CODE.match(raw_code):
return parse_uni_code(raw_code)
code = parse_key_code(raw_code, key_prefixes, valid_keycodes)
return code, None, None
def parse_keymap(config, key_indexes, layer_lines, valid_keycodes):
keymap = {}
raw_codes = list(iter_raw_codes(
layer_lines, config['filler'], config['separator']
))
indexed_codes = iter_indexed_codes(raw_codes, key_indexes)
key_prefixes = config['key_prefixes']
for raw_code, key_index, row_index in indexed_codes:
code, macro_id, uc_hex = parse_code(
raw_code, key_prefixes, valid_keycodes
)
# TODO: line numbers for invalid codes
err_msg = "Could not parse key '{}' on row {}".format(
raw_code, row_index
)
assert code is not None, err_msg
# print(repr(raw_code), repr(code), macro_id, uc_hex)
if macro_id:
config['macro_ids'].add(macro_id)
if uc_hex:
config['unicode_macros'][macro_id] = uc_hex
keymap[key_index] = (code, row_index)
return keymap
def parse_keymaps(config, valid_keycodes):
keymaps = collections.OrderedDict()
key_indexes = config.get(
'key_indexes', KEYBOARD_LAYOUTS[config['layout']]
)
# TODO: maybe validate key_indexes
for layer_name, layer_lines, in config['layer_lines'].items():
keymaps[layer_name] = parse_keymap(
config, key_indexes, layer_lines, valid_keycodes
)
return keymaps
# keymap.c output
USERCODE = """
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case L1:
ergodox_right_led_1_on();
break;
case L2:
ergodox_right_led_2_on();
break;
case L3:
ergodox_right_led_3_on();
break;
case L4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
break;
case L5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
break;
// case L6:
// ergodox_right_led_2_on();
// ergodox_right_led_3_on();
// break;
// case L7:
// ergodox_right_led_1_on();
// ergodox_right_led_2_on();
// ergodox_right_led_3_on();
// break;
default:
ergodox_board_led_off();
break;
}
};
"""
MACROCODE = """
#define UC_MODE_WIN 0
#define UC_MODE_LINUX 1
#define UC_MODE_OSX 2
// TODO: allow default mode to be configured
static uint16_t unicode_mode = UC_MODE_WIN;
uint16_t hextokeycode(uint8_t hex) {{
if (hex == 0x0) {{
return KC_P0;
}}
if (hex < 0xA) {{
return KC_P1 + (hex - 0x1);
}}
return KC_A + (hex - 0xA);
}}
void unicode_action_function(uint16_t hi, uint16_t lo) {{
switch (unicode_mode) {{
case UC_MODE_WIN:
register_code(KC_LALT);
register_code(KC_PPLS);
unregister_code(KC_PPLS);
register_code(hextokeycode((hi & 0xF0) >> 4));
unregister_code(hextokeycode((hi & 0xF0) >> 4));
register_code(hextokeycode((hi & 0x0F)));
unregister_code(hextokeycode((hi & 0x0F)));
register_code(hextokeycode((lo & 0xF0) >> 4));
unregister_code(hextokeycode((lo & 0xF0) >> 4));
register_code(hextokeycode((lo & 0x0F)));
unregister_code(hextokeycode((lo & 0x0F)));
unregister_code(KC_LALT);
break;
case UC_MODE_LINUX:
register_code(KC_LCTL);
register_code(KC_LSFT);
register_code(KC_U);
unregister_code(KC_U);
register_code(hextokeycode((hi & 0xF0) >> 4));
unregister_code(hextokeycode((hi & 0xF0) >> 4));
register_code(hextokeycode((hi & 0x0F)));
unregister_code(hextokeycode((hi & 0x0F)));
register_code(hextokeycode((lo & 0xF0) >> 4));
unregister_code(hextokeycode((lo & 0xF0) >> 4));
register_code(hextokeycode((lo & 0x0F)));
unregister_code(hextokeycode((lo & 0x0F)));
unregister_code(KC_LCTL);
unregister_code(KC_LSFT);
break;
case UC_MODE_OSX:
break;
}}
}}
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {{
if (!record->event.pressed) {{
return MACRO_NONE;
}}
// MACRODOWN only works in this function
switch(id) {{
case UM:
unicode_mode = (unicode_mode + 1) % 2;
break;
{macro_cases}
{unicode_macro_cases}
default:
break;
}}
return MACRO_NONE;
}};
"""
UNICODE_MACRO_TEMPLATE = """
case {macro_id}:
unicode_action_function(0x{hi:02x}, 0x{lo:02x});
break;
""".strip()
def unicode_macro_cases(config):
for macro_id, uc_hex in config['unicode_macros'].items():
hi = int(uc_hex, 16) >> 8
lo = int(uc_hex, 16) & 0xFF
unimacro_keys = ", ".join(
"T({})".format(
"KP_" + digit if digit.isdigit() else digit
) for digit in uc_hex
)
yield UNICODE_MACRO_TEMPLATE.format(
macro_id=macro_id, hi=hi, lo=lo
)
def iter_keymap_lines(keymap, row_indents=None):
col_widths = {}
col = 0
# first pass, figure out the column widths
prev_row_index = None
for code, row_index in keymap.values():
if row_index != prev_row_index:
col = 0
if row_indents:
col = row_indents[row_index]
col_widths[col] = max(len(code), col_widths.get(col, 0))
prev_row_index = row_index
col += 1
# second pass, yield the cell values
col = 0
prev_row_index = None
for key_index in sorted(keymap):
code, row_index = keymap[key_index]
if row_index != prev_row_index:
col = 0
yield "\n"
if row_indents:
for indent_col in range(row_indents[row_index]):
pad = " " * (col_widths[indent_col] - 4)
yield (" /*-*/" + pad)
col = row_indents[row_index]
else:
yield pad
yield " {}".format(code)
if key_index < len(keymap) - 1:
yield ","
# This will be yielded on the next iteration when
# we know that we're not at the end of a line.
pad = " " * (col_widths[col] - len(code))
prev_row_index = row_index
col += 1
def iter_keymap_parts(config, keymaps):
# includes
for include_path in config['keymaps_includes']:
yield '#include "{}"\n'.format(include_path)
yield "\n"
# definitions
for i, macro_id in enumerate(sorted(config['macro_ids'])):
yield "#define {} {}\n".format(macro_id, i)
yield "\n"
for i, layer_name in enumerate(config['layer_lines']):
yield '#define L{0:<3} {0:<5} // {1}\n'.format(i, layer_name)
yield "\n"
# keymaps
yield "const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\n"
for i, layer_name in enumerate(config['layer_lines']):
# comment
layer_lines = config['layer_lines'][layer_name]
prefixed_lines = " * " + " * ".join(layer_lines)
yield "/*\n{} */\n".format(prefixed_lines)
# keymap codes
keymap = keymaps[layer_name]
row_indents = ROW_INDENTS.get(config['layout'])
keymap_lines = "".join(iter_keymap_lines(keymap, row_indents))
yield "[L{0}] = KEYMAP({1}\n),\n".format(i, keymap_lines)
yield "};\n\n"
# no idea what this is for
yield "const uint16_t PROGMEM fn_actions[] = {};\n"
# macros
yield MACROCODE.format(
macro_cases="",
unicode_macro_cases="\n".join(unicode_macro_cases(config)),
)
# TODO: dynamically create blinking lights
yield USERCODE
def main(argv=sys.argv[1:]):
if not argv or '-h' in argv or '--help' in argv:
print(__doc__)
return 0
in_path = os.path.abspath(argv[0])
if not os.path.exists(in_path):
print("No such file '{}'".format(in_path))
return 1
if len(argv) > 1:
out_path = os.path.abspath(argv[1])
else:
dirname = os.path.dirname(in_path)
out_path = os.path.join(dirname, "keymap.c")
config = parse_config(in_path)
valid_keys = parse_valid_keys(config, out_path)
keymaps = parse_keymaps(config, valid_keys)
with io.open(out_path, mode="w", encoding="utf-8") as fh:
for part in iter_keymap_parts(config, keymaps):
fh.write(part)
if __name__ == '__main__':
sys.exit(main())

+ 0
- 3
keyboards/ergodox80/ergodox80/util/readme.md View File

@ -1,3 +0,0 @@
# ErgoDox EZ Utilities
The Python script in this directory, by [mbarkhau](https://github.com/mbarkhau) allows you to write out a basic ErgoDox EZ keymap using Markdown notation, and then transpile it to C, which you can then compile. It's experimental, but if you're not comfortable using C, it's a nice option.

+ 0
- 6
keyboards/ergodox80/readme.md View File

@ -1,6 +0,0 @@
# Ergodox 80 key support
This is based on the ergodox-ez qmk firmware but is for ergodoxes with 80 keys.

+ 0
- 28
keyboards/ergodox80/rules.mk View File

@ -1,28 +0,0 @@
#----------------------------------------------------------------------------
# On command line:
#
# make = Make software.
#
# make clean = Clean out built project files.
#
# That's pretty much all you need. To compile, always go make clean,
# followed by make.
#
# For advanced users only:
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
#----------------------------------------------------------------------------
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= yes # Unicode

Write Preview
Loading…
Cancel
Save