* added zj68 keyboard * Suggested changes * Suggested changes * Suggested changes * Requested changes * Update keyboards/zj68/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>pull/6398/head
@ -0,0 +1,64 @@ | |||
/* | |||
Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Drop | |||
#define PRODUCT ZJ68 | |||
#define DESCRIPTION QMK ZJ68 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } | |||
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_PIN B6 | |||
#ifdef BACKLIGHT_PIN | |||
#define BACKLIGHT_LEVELS 5 | |||
#endif | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
#define RGB_DI_PIN E2 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 14 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif |
@ -0,0 +1,86 @@ | |||
{ | |||
"keyboard_name": "ZJ68", | |||
"maintainer": "qmk", | |||
"width": 16, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"layout": [ | |||
{ "label": "~", "x": 0, "y": 0 }, | |||
{ "label": "!", "x": 1, "y": 0 }, | |||
{ "label": "@", "x": 2, "y": 0 }, | |||
{ "label": "#", "x": 3, "y": 0 }, | |||
{ "label": "$", "x": 4, "y": 0 }, | |||
{ "label": "%", "x": 5, "y": 0 }, | |||
{ "label": "^", "x": 6, "y": 0 }, | |||
{ "label": "&", "x": 7, "y": 0 }, | |||
{ "label": "*", "x": 8, "y": 0 }, | |||
{ "label": "(", "x": 9, "y": 0 }, | |||
{ "label": ")", "x": 10, "y": 0 }, | |||
{ "label": "_", "x": 11, "y": 0 }, | |||
{ "label": "+", "x": 12, "y": 0 }, | |||
{ "x": 13, "y": 0 }, | |||
{ "x": 14, "y": 0 }, | |||
{ "x": 15, "y": 0 }, | |||
{ "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, | |||
{ "label": "Q", "x": 1.5, "y": 1 }, | |||
{ "label": "W", "x": 2.5, "y": 1 }, | |||
{ "label": "E", "x": 3.5, "y": 1 }, | |||
{ "label": "R", "x": 4.5, "y": 1 }, | |||
{ "label": "T", "x": 5.5, "y": 1 }, | |||
{ "label": "Y", "x": 6.5, "y": 1 }, | |||
{ "label": "U", "x": 7.5, "y": 1 }, | |||
{ "label": "I", "x": 8.5, "y": 1 }, | |||
{ "label": "O", "x": 9.5, "y": 1 }, | |||
{ "label": "P", "x": 10.5, "y": 1 }, | |||
{ "label": "{", "x": 11.5, "y": 1 }, | |||
{ "label": "}", "x": 12.5, "y": 1 }, | |||
{ "label": "|", "x": 13.5, "y": 1, "w": 1.5 }, | |||
{ "x": 15, "y": 1 }, | |||
{ "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, | |||
{ "label": "A", "x": 1.75, "y": 2 }, | |||
{ "label": "S", "x": 2.75, "y": 2 }, | |||
{ "label": "D", "x": 3.75, "y": 2 }, | |||
{ "label": "F", "x": 4.75, "y": 2 }, | |||
{ "label": "G", "x": 5.75, "y": 2 }, | |||
{ "label": "H", "x": 6.75, "y": 2 }, | |||
{ "label": "J", "x": 7.75, "y": 2 }, | |||
{ "label": "K", "x": 8.75, "y": 2 }, | |||
{ "label": "L", "x": 9.75, "y": 2 }, | |||
{ "label": ":", "x": 10.75, "y": 2 }, | |||
{ "label": "\"", "x": 11.75, "y": 2 }, | |||
{ "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, | |||
{ "x": 15, "y": 2 }, | |||
{ "label": "Shift", "x": 0, "y": 3, "w": 1.25 }, | |||
{ "x": 1.25, "y": 3 }, | |||
{ "label": "Z", "x": 2.25, "y": 3 }, | |||
{ "label": "X", "x": 3.25, "y": 3 }, | |||
{ "label": "C", "x": 4.25, "y": 3 }, | |||
{ "label": "V", "x": 5.25, "y": 3 }, | |||
{ "label": "B", "x": 6.25, "y": 3 }, | |||
{ "label": "N", "x": 7.25, "y": 3 }, | |||
{ "label": "M", "x": 8.25, "y": 3 }, | |||
{ "label": "<", "x": 9.25, "y": 3 }, | |||
{ "label": ">", "x": 10.25, "y": 3 }, | |||
{ "label": "?", "x": 11.25, "y": 3 }, | |||
{ "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, | |||
{ "x": 14, "y": 3 }, | |||
{ "x": 15, "y": 3 }, | |||
{ "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, | |||
{ "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, | |||
{ "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, | |||
{ "x": 3.75, "y": 4, "w": 6.25 }, | |||
{ "label": "Alt", "x": 10, "y": 4 }, | |||
{ "label": "Win", "x": 11, "y": 4 }, | |||
{ "x": 12, "y": 4 }, | |||
{ "x": 13, "y": 4 }, | |||
{ "x": 14, "y": 4 }, | |||
{ "x": 15, "y": 4 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,35 @@ | |||
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT_all( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_DEL, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, | |||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
LAYOUT_all( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, RESET, KC_PSCR, | |||
RGB_TOG, _______, KC_UP, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, | |||
BL_TOGG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, KC_END, | |||
_______, _______, _______, BL_DEC, BL_INC, BL_STEP, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,3 @@ | |||
# ZJ68 Default layout | |||
This is the default layout from the json file provided on Drop, that was intended to be used on kbdfirmware, with an added soft reset on fn(backspace). |
@ -0,0 +1,34 @@ | |||
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT_65_ansi_split_bs( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, | |||
MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
LAYOUT_65_ansi_split_bs( | |||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,3 @@ | |||
# ZJ68 W/ Split Backspace | |||
The plate that comes with the kit from Drop only allows one layout, but the pcb supports having a split backspace, so by widening the plate where the stabilizers are meant to go, you can fit the two switches in, if you want to go back to a single backspace later, you can still use pcb mount stabilizers. |
@ -0,0 +1,15 @@ | |||
# ZJ68 | |||
![JZ68](https://i.imgur.com/bcsfQyt.jpg) | |||
A 65% keyboard kit sold through Drop. | |||
Keyboard Maintainer: QMK Community | |||
Hardware Supported: ZJ68 PCB | |||
Hardware Availability: [Drop](https://drop.com/buy/zj68-68-key-mechanical-keyboard-kit?mode=guest_open) | |||
Make example for this keyboard (after setting up your build environment): | |||
make zj68:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,63 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
AUDIO_ENABLE = no | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
RGBLIGHT_ENABLE = no | |||
LAYOUTS = 65_ansi |
@ -0,0 +1,24 @@ | |||
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "zj68.h" | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
matrix_scan_user(); | |||
} |
@ -0,0 +1,60 @@ | |||
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT_65_ansi( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ | |||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ | |||
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ | |||
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ | |||
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \ | |||
} | |||
#define LAYOUT_65_ansi_split_bs( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ | |||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ | |||
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ | |||
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ | |||
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \ | |||
} | |||
#define LAYOUT_all( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ | |||
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ | |||
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \ | |||
} |