diff --git a/keyboards/e6v2/config.h b/keyboards/e6v2/config.h
new file mode 100644
index 00000000000..b80afcb51ae
--- /dev/null
+++ b/keyboards/e6v2/config.h
@@ -0,0 +1,65 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Exclusive / E-Team
+#define PRODUCT         E6-V2
+#define DESCRIPTION     E6-V2 QMK PCB (Mid-Port)
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* QMK E6-V2 PCB default pin-out */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B1 }
+#define UNUSED_PINS { E6, B2, B3, B7 }
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 12
+#endif
+
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#define BACKLIGHT_BREAHTING
+#define BREATHING_PERIOD 3
+#endif
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCING_DELAY 5
+
+#define IS_COMMAND() ( \
+        keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    )
+
+
+
+#endif
diff --git a/keyboards/e6v2/e6v2.c b/keyboards/e6v2/e6v2.c
new file mode 100644
index 00000000000..917f3e07b60
--- /dev/null
+++ b/keyboards/e6v2/e6v2.c
@@ -0,0 +1,53 @@
+#include "e6v2.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	DDRB |= (1<<6);
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+			// output low
+			DDRB |= (1<<2);
+			PORTB &= ~(1<<2);
+		} else {
+			// Hi-Z
+			DDRB &= ~(1<<2);
+			PORTB &= ~(1<<2);
+		}
+	// DDRB |= (1<<7);
+	// DDRB |= (1<<1);
+	// DDRB |= (1<<3);
+	// DDRE |= (1<<6);
+	if (usb_led == 0){
+		PORTB |= (1<<6);
+		// PORTB |= (1<<7);
+		// PORTB |= (1<<1);
+		// PORTB |= (1<<3);
+		// PORTE |= (1<<6);
+	}
+	else{
+		PORTB &= ~(1<<6);
+		// PORTB &= ~(1<<7);
+	}
+    
+	led_set_user(usb_led);
+}
diff --git a/keyboards/e6v2/e6v2.h b/keyboards/e6v2/e6v2.h
new file mode 100644
index 00000000000..b5726eaa34b
--- /dev/null
+++ b/keyboards/e6v2/e6v2.h
@@ -0,0 +1,66 @@
+#ifndef E6V2_H
+#define E6V2_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+     K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,  K1D,   \
+      K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,  K2C,  K2D, \
+    K30,  K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,  K3C,    K3D, \
+    K40,  K41,  K42,                K46,                K4A,  K4B,  K4C,  K4D \
+)\
+{\
+  { K00, K01, K02, K03,   K04,   K05,   K06, K07,   K08,   K09,   K0A, K0B, K0C, K0D, K0E   }, \
+  { K10, K11, K12, K13,   K14,   K15,   K16, K17,   K18,   K19,   K1A, K1B, K1C, K1D, KC_NO }, \
+  { K20, K21, K22, K23,   K24,   K25,   K26, K27,   K28,   K29,   K2A, K2B, K2C, K2D, KC_NO }, \
+  { K30, K31, K32, K33,   K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, K3C, K3D, KC_NO }, \
+  { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \
+}
+
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0D, \
+     K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,  K1D,   \
+      K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+     K30,  K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3C,         \
+    K40,  K41,  K42,                K46,                K4A,  K4B,  K4C,  K4D \
+)\
+{\
+  { K00, K01,   K02, K03,   K04,   K05,   K06, K07,   K08,   K09,   K0A, K0B, K0C,   K0D,   KC_NO }, \
+  { K10, K11,   K12, K13,   K14,   K15,   K16, K17,   K18,   K19,   K1A, K1B, K1C,   K1D,   KC_NO }, \
+  { K20, K21,   K22, K23,   K24,   K25,   K26, K27,   K28,   K29,   K2A, K2B, KC_NO, K2D,   KC_NO }, \
+  { K30, KC_NO, K32, K33,   K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, K3C,   KC_NO, KC_NO }, \
+  { K40, K41,   K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D,   KC_NO }, \
+}
+
+#define KEYMAP_HHKB( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0D, \
+     K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,  K1D,   \
+      K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,       K2D,  \
+        K30,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C,  K3D,  \
+          K41,  K42,                 K46,                   K4B,  K4C         \
+)\
+{\
+  { K00,   K01,   K02, K03,   K04,   K05,   K06, K07,   K08,   K09,   K0A,   K0B, K0C,   K0D,   KC_NO }, \
+  { K10,   K11,   K12, K13,   K14,   K15,   K16, K17,   K18,   K19,   K1A,   K1B, K1C,   K1D,   KC_NO }, \
+  { K20,   K21,   K22, K23,   K24,   K25,   K26, K27,   K28,   K29,   K2A,   K2B, KC_NO, K2D,   KC_NO }, \
+  { K30,   KC_NO, K32, K33,   K34,   K35,   K36, K37,   K38,   K39,   K3A,   K3B, K3C,   K3D,   KC_NO }, \
+  { KC_NO, K41,   K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C,   KC_NO, KC_NO }, \
+}
+
+#define KEYMAP_HHKB_SPLITS( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,    K0D, K0E,\
+     K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,  K1D,     \
+      K20,  K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D,     \
+     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,   K3C, K3D,     \
+          K41,  K42,                 K46,                   K4B,  K4C           \
+)\
+{\
+  { K00,   K01, K02, K03,   K04,   K05,   K06, K07,   K08,   K09,   K0A,   K0B, K0C,   K0D,   K0E   }, \
+  { K10,   K11, K12, K13,   K14,   K15,   K16, K17,   K18,   K19,   K1A,   K1B, K1C,   K1D,   KC_NO }, \
+  { K20,   K21, K22, K23,   K24,   K25,   K26, K27,   K28,   K29,   K2A,   K2B, KC_NO, K2D,   KC_NO }, \
+  { K30,   K31, K32, K33,   K34,   K35,   K36, K37,   K38,   K39,   K3A,   K3B, K3C,   K3D,   KC_NO }, \
+  { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C,   KC_NO, KC_NO }, \
+}
+
+#endif
diff --git a/keyboards/e6v2/keymaps/amnesia0287/config.h b/keyboards/e6v2/keymaps/amnesia0287/config.h
new file mode 100644
index 00000000000..a5568e400de
--- /dev/null
+++ b/keyboards/e6v2/keymaps/amnesia0287/config.h
@@ -0,0 +1 @@
+#include "../../config.h"
diff --git a/keyboards/e6v2/keymaps/amnesia0287/keymap.c b/keyboards/e6v2/keymaps/amnesia0287/keymap.c
new file mode 100644
index 00000000000..eaa31f3f714
--- /dev/null
+++ b/keyboards/e6v2/keymaps/amnesia0287/keymap.c
@@ -0,0 +1,79 @@
+#include "e6v2.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL  0
+#define _HLa 1
+#define _HLb 2
+#define _HL  3  
+#define _XL  4
+
+enum hype_keycodes {
+  FN_HLa = SAFE_RANGE,
+  FN_HLb
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BL] = KEYMAP_HHKB(
+        KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,     KC_QUOT,       KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,   KC_DOT,     KC_SLSH,    KC_RSFT,  FN_HLb,
+                KC_LGUI, KC_LALT,               KC_SPACE,                               KC_RALT, FN_HLa
+        ),
+    [_HLa] = KEYMAP_HHKB(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP,    KC_LEFT,   KC_RGHT,      KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,   KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS,               KC_MPLY,                               KC_TRNS,  KC_TRNS  
+        ),
+    [_HLb] = KEYMAP_HHKB(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP,    KC_LEFT,   KC_RGHT,      KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,   KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS,               KC_MPLY,                               KC_TRNS,  KC_TRNS  
+        ),
+    [_HL] = KEYMAP_HHKB(
+        RGB_TOG, RGB_M_P, RGB_RMOD, RGB_MOD, KC_TRNS,  KC_TRNS, KC_TRNS, BL_BRTG, BL_OFF, BL_STEP, BL_ON, BL_DEC, BL_INC, LALT(KC_F4),
+        RESET, RGB_HUI, RGB_SAI,  RGB_VAI, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_HUD, RGB_SAD,  RGB_VAD, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,        KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, RGB_VAD,  RGB_VAI,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS,   KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,                        KC_TRNS,                               KC_TRNS, KC_TRNS
+        ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FN_HLa:
+      if (record->event.pressed)
+      {
+        layer_on(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+    case FN_HLb:
+      if (record->event.pressed)
+      {
+        layer_on(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/e6v2/keymaps/amnesia0287/readme.md b/keyboards/e6v2/keymaps/amnesia0287/readme.md
new file mode 100644
index 00000000000..834604ce23c
--- /dev/null
+++ b/keyboards/e6v2/keymaps/amnesia0287/readme.md
@@ -0,0 +1,8 @@
+amnesia0287's Keymap
+===
+
+Keymap Maintainer: [Jason Gorman](https://github.com/amnesia0287)
+
+Difference from base layout: Primarily the HHKB-ness
+
+Intended usage: Daily driver for programming 
diff --git a/keyboards/e6v2/keymaps/amnesia0287/rules.mk b/keyboards/e6v2/keymaps/amnesia0287/rules.mk
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/keyboards/e6v2/keymaps/default/config.h b/keyboards/e6v2/keymaps/default/config.h
new file mode 100644
index 00000000000..a5568e400de
--- /dev/null
+++ b/keyboards/e6v2/keymaps/default/config.h
@@ -0,0 +1 @@
+#include "../../config.h"
diff --git a/keyboards/e6v2/keymaps/default/keymap.c b/keyboards/e6v2/keymaps/default/keymap.c
new file mode 100644
index 00000000000..ae63df8c002
--- /dev/null
+++ b/keyboards/e6v2/keymaps/default/keymap.c
@@ -0,0 +1,18 @@
+#include "e6v2.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP_ANSI(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,      KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,      KC_L,    KC_SCLN, KC_QUOT,       KC_ENT,
+      KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,  KC_SLSH, KC_RSFT,
+      KC_LCTL, KC_LGUI, KC_LALT,               KC_SPACE,                        KC_RALT, MO(1),   KC_MENU, KC_RCTL
+      ),
+  [1] = KEYMAP_ANSI(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+      RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR,   KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME,   KC_PGUP, KC_LEFT, KC_RGHT,      KC_TRNS,
+      KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS,   KC_END,  KC_PGDN, KC_DOWN, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,               KC_MPLY,                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+      ),
+};
diff --git a/keyboards/e6v2/keymaps/default/readme.md b/keyboards/e6v2/keymaps/default/readme.md
new file mode 100644
index 00000000000..02153cb0d38
--- /dev/null
+++ b/keyboards/e6v2/keymaps/default/readme.md
@@ -0,0 +1,8 @@
+Default Keymap
+===
+
+Super simple default keymap with only a base layer.
+
+Keymap Maintainer: [Jason Gorman](https://github.com/amnesia0287)
+
+Intended usage: This is mostly provided for testing before you build your own keymap and as a reference to a stock(ish) configuration
diff --git a/keyboards/e6v2/keymaps/default/rules.mk b/keyboards/e6v2/keymaps/default/rules.mk
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/keyboards/e6v2/readme.md b/keyboards/e6v2/readme.md
new file mode 100644
index 00000000000..725c264cabd
--- /dev/null
+++ b/keyboards/e6v2/readme.md
@@ -0,0 +1,18 @@
+E6-V2
+===
+
+These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/)
+
+Keyboard Maintainer: [Jason Gorman](https://github.com/amnesia0287)
+Hardware Supported: E6-V2 Mid Port rev.qmk
+Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make e6v2:default
+
+Or to make and flash:
+
+    make e6v2:default:dfu
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/e6v2/rules.mk b/keyboards/e6v2/rules.mk
new file mode 100644
index 00000000000..c2c02b6147a
--- /dev/null
+++ b/keyboards/e6v2/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/s60_x/keymaps/amnesia0287/keymap.c b/keyboards/s60_x/keymaps/amnesia0287/keymap.c
new file mode 100644
index 00000000000..f9ca3f15ab8
--- /dev/null
+++ b/keyboards/s60_x/keymaps/amnesia0287/keymap.c
@@ -0,0 +1,81 @@
+#include "rgb.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL  0
+#define _HLa 1
+#define _HLb 2
+#define _HL  3  
+#define _XL  4
+
+enum hype_keycodes {
+  FN_HLa = SAFE_RANGE,
+  FN_HLb
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    [_BL] = KEYMAP(
+        KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_NO,   KC_BSPC, \
+        KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,       \
+        KC_LCTL,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_NO,   KC_ENT ,       \
+        KC_LSFT,   KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_NO,   KC_RSFT, FN_HLb, \
+        KC_LCTL,   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_NO,   KC_RALT, FN_HLa,  KC_RCTL
+        ),
+    [_HLa] = KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK,  KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP,  KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,   KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_MPLY,                            KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS  
+        ),
+    [_HLb] = KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_MPLY,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS  
+        ),
+    [_HL] = KEYMAP(
+        RGB_TOG, RGB_M_P, RGB_RMOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, BL_BRTG, BL_OFF,  BL_STEP, BL_ON,   BL_DEC,  BL_INC,  KC_TRNS, LALT(KC_F4),
+        RESET,   RGB_HUI, RGB_SAI,  RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_HUD, RGB_SAD,  RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                        KC_TRNS,                                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FN_HLa:
+      if (record->event.pressed)
+      {
+        layer_on(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+    case FN_HLb:
+      if (record->event.pressed)
+      {
+        layer_on(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/s60_x/keymaps/amnesia0287/readme.md b/keyboards/s60_x/keymaps/amnesia0287/readme.md
new file mode 100644
index 00000000000..69cede566a9
--- /dev/null
+++ b/keyboards/s60_x/keymaps/amnesia0287/readme.md
@@ -0,0 +1,27 @@
+### 1  Standard - ANSI
+This is a variation of the default keymap with added RGB underglow and in-switch LED controls.
+
+#### 1.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 1.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│     │BLDEC│BLTOG│BLINC│▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/amnesia0287/keymap.c b/keyboards/tada68/keymaps/amnesia0287/keymap.c
new file mode 100644
index 00000000000..8562a745a28
--- /dev/null
+++ b/keyboards/tada68/keymaps/amnesia0287/keymap.c
@@ -0,0 +1,113 @@
+#include "tada68.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL  0
+#define _HLa 1
+#define _HLb 2
+#define _HL  3
+#define _XL  4
+
+#define _______ KC_TRNS
+
+enum hype_keycodes {
+  FN_HLa = SAFE_RANGE,
+  FN_HLb
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_BL] = KEYMAP_ANSI(
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC,KC_HOME, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,KC_PGUP, \
+  KC_LCTL, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,KC_PGDN,  \
+  KC_LSPO,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSPC,KC_UP,LT(_HLa, KC_END), \
+  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,FN_HLa,FN_HLb, KC_LEFT,KC_DOWN,KC_RGHT),
+
+  /* Keymap _HL: Hype Fn Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
+   * |----------------------------------------------------------------|
+   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
+   * |----------------------------------------------------------------|
+   * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
+   * |----------------------------------------------------------------|
+   * |        |   |   |Bl-|BL |BL+|   |VU-|VU+|MUT|   |   McL|MsU|McR |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |MsL|MsD|MsR |
+   * `----------------------------------------------------------------'
+   */
+[_HLa] = KEYMAP_ANSI(
+   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS,  \
+     KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______, \
+      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______, \
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+[_HLb] = KEYMAP_ANSI(
+   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,          KC_DEL,KC_INS,  \
+     KC_CAPS,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______, \
+      _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,KC_PGUP,_______, \
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+[_HL] = KEYMAP_ANSI(
+  BL_TOGG, BL_DEC, BL_INC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LALT(KC_F4),MAGIC_UNSWAP_BACKSLASH_BACKSPACE,  \
+     _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,MAGIC_SWAP_BACKSLASH_BACKSPACE, \
+      _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,_______,_______,_______,_______,_______,_______,_______,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,       _______,KC_MNXT,_______, \
+    KC_MPRV,  KC_MPLY,  KC_MNXT,                     KC_MPLY,                     _______,_______,_______,KC_MRWD,KC_MPRV,KC_MFFD),
+
+[_XL] = KEYMAP_ANSI(
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,_______,  \
+     _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,_______, \
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,            _______,_______, \
+           _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,       _______,_______,_______, \
+    _______,  _______,  _______,                     _______,                     _______,_______,_______,_______,_______,_______),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FN_HLa:
+      if (record->event.pressed)
+      {
+        layer_on(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLa);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+    case FN_HLb:
+      if (record->event.pressed)
+      {
+        layer_on(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      else
+      {
+        layer_off(_HLb);
+        update_tri_layer(_HLa, _HLb, _HL);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/tada68/keymaps/amnesia0287/readme.md b/keyboards/tada68/keymaps/amnesia0287/readme.md
new file mode 100644
index 00000000000..53412d7c255
--- /dev/null
+++ b/keyboards/tada68/keymaps/amnesia0287/readme.md
@@ -0,0 +1,3 @@
+# default TADA68 layout
+
+This layout replicates the default factory layout of the TADA68.