* add dz60rgb keyboard * add info.json * Update config.h * Update rules.mk * Update dz60rgb.h * Update dz60rgb.c * Update keymap.c * Update dz60rgb.h * Create readme.md * Update readme.md * Update keymap.c * Update dz60rgb.h * Update info.jsonpull/5011/head
@ -0,0 +1,126 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#include "hal.h" | |||
#if HAL_USE_PAL || defined(__DOXYGEN__) | |||
/** | |||
* @brief PAL setup. | |||
* @details Digital I/O ports static configuration as defined in @p board.h. | |||
* This variable is used by the HAL when initializing the PAL driver. | |||
*/ | |||
const PALConfig pal_default_config = { | |||
#if STM32_HAS_GPIOA | |||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, | |||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOB | |||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, | |||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOC | |||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, | |||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOD | |||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, | |||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOE | |||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, | |||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOF | |||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, | |||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOG | |||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, | |||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOH | |||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, | |||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOI | |||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, | |||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} | |||
#endif | |||
}; | |||
#endif | |||
void enter_bootloader_mode_if_requested(void); | |||
/** | |||
* @brief Early initialization code. | |||
* @details This initialization must be performed just after stack setup | |||
* and before any other initialization. | |||
*/ | |||
void __early_init(void) { | |||
enter_bootloader_mode_if_requested(); | |||
stm32_clock_init(); | |||
} | |||
#if HAL_USE_SDC || defined(__DOXYGEN__) | |||
/** | |||
* @brief SDC card detection. | |||
*/ | |||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { | |||
(void)sdcp; | |||
/* TODO: Fill the implementation.*/ | |||
return true; | |||
} | |||
/** | |||
* @brief SDC card write protection detection. | |||
*/ | |||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) { | |||
(void)sdcp; | |||
/* TODO: Fill the implementation.*/ | |||
return false; | |||
} | |||
#endif /* HAL_USE_SDC */ | |||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) | |||
/** | |||
* @brief MMC_SPI card detection. | |||
*/ | |||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { | |||
(void)mmcp; | |||
/* TODO: Fill the implementation.*/ | |||
return true; | |||
} | |||
/** | |||
* @brief MMC_SPI card write protection detection. | |||
*/ | |||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) { | |||
(void)mmcp; | |||
/* TODO: Fill the implementation.*/ | |||
return false; | |||
} | |||
#endif | |||
/** | |||
* @brief Board-specific initialization code. | |||
* @todo Add your board-specific code, if any. | |||
*/ | |||
void boardInit(void) { | |||
} |
@ -0,0 +1,5 @@ | |||
# List of all the board related files. | |||
BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c | |||
# Required include directories | |||
BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC |
@ -0,0 +1,7 @@ | |||
/* Address for jumping to bootloader on STM32 chips. */ | |||
/* It is chip dependent, the correct number can be looked up here: | |||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
* This also requires a patch to chibios: | |||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
*/ | |||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 |
@ -0,0 +1,520 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
#define CHCONF_H | |||
#define _CHIBIOS_RT_CONF_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#define CH_CFG_ST_RESOLUTION 32 | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
#define CH_CFG_ST_FREQUENCY 100000 | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
#define CH_CFG_ST_TIMEDELTA 2 | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
#define CH_CFG_TIME_QUANTUM 0 | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
#define CH_CFG_MEMCORE_SIZE 0 | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_OPTIMIZE_SPEED TRUE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_TM TRUE | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_REGISTRY TRUE | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_WAITEXIT TRUE | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES TRUE | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES TRUE | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS TRUE | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_EVENTS TRUE | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES TRUE | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES_PRIORITY TRUE | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_MAILBOXES TRUE | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMCORE TRUE | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
#define CH_CFG_USE_HEAP TRUE | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMPOOLS TRUE | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
#define CH_CFG_USE_DYNAMIC TRUE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_STATISTICS FALSE | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_CHECKS FALSE | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
#define CH_DBG_ENABLE_STACK_CHECK TRUE | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_FILL_THREADS FALSE | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
#define CH_DBG_THREADS_PROFILING FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p chThdInit() API. | |||
* | |||
* @note It is invoked from within @p chThdInit() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
/* Add threads finalization code here.*/ \ | |||
} | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
/* Context switch code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
/* IRQ prologue code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
/* IRQ epilogue code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
/* Idle-enter code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
/* Idle-leave code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
/* Idle loop code here.*/ \ | |||
} | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
/* System tick event code here.*/ \ | |||
} | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
/* System halt code here.*/ \ | |||
} | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||
/* Trace code here.*/ \ | |||
} | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1,36 @@ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x1219 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER DOU | |||
#define PRODUCT DZ60RGB | |||
#define DESCRIPTION DZ60 ARM RGB keyboard | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } | |||
#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } | |||
/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
#define DEBOUNCE 3 | |||
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects | |||
#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended | |||
#define RGB_MATRIX_SKIP_FRAMES 0 | |||
#define RGB_MATRIX_KEYPRESSES | |||
#define DISABLE_RGB_MATRIX_SPLASH | |||
#define DISABLE_RGB_MATRIX_MULTISPLASH | |||
#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH | |||
#define DRIVER_ADDR_1 0b1010000 | |||
#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. | |||
#define DRIVER_COUNT 2 | |||
#define DRIVER_1_LED_TOTAL 63 | |||
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL |
@ -0,0 +1,172 @@ | |||
#include "dz60rgb.h" | |||
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { | |||
/* Refer to IS31 manual for these locations | |||
* driver | |||
* | R location | |||
* | | G location | |||
* | | | B location | |||
* | | | | */ | |||
{0, K_14, J_14, L_14}, | |||
{0, K_13, J_13, L_13}, | |||
{0, K_12, J_12, L_12}, | |||
{0, K_11, J_11, L_11}, | |||
{0, K_10, J_10, L_10}, | |||
{0, K_9, J_9, L_9}, | |||
{0, K_8, J_8, L_8}, | |||
{0, K_7, J_7, L_7}, | |||
{0, K_6, J_6, L_6}, | |||
{0, K_5, J_5, L_5}, | |||
{0, K_4, J_4, L_4}, | |||
{0, K_3, J_3, L_3}, | |||
{0, K_2, J_2, L_2}, | |||
{0, K_1, J_1, L_1}, | |||
{0, H_14, G_14, I_14}, | |||
{0, H_13, G_13, I_13}, | |||
{0, H_12, G_12, I_12}, | |||
{0, H_11, G_11, I_11}, | |||
{0, H_10, G_10, I_10}, | |||
{0, H_9, G_9, I_9}, | |||
{0, H_8, G_8, I_8}, | |||
{0, H_7, G_7, I_7}, | |||
{0, H_6, G_6, I_6}, | |||
{0, H_5, G_5, I_5}, | |||
{0, H_4, G_4, I_4}, | |||
{0, H_3, G_3, I_3}, | |||
{0, H_2, G_2, I_2}, | |||
{0, H_1, G_1, I_1}, | |||
{0, E_14, D_14, F_14}, | |||
{0, E_12, D_12, F_12}, | |||
{0, E_11, D_11, F_11}, | |||
{0, E_10, D_10, F_10}, | |||
{0, E_9, D_9, F_9}, | |||
{0, E_8, D_8, F_8}, | |||
{0, E_7, D_7, F_7}, | |||
{0, E_6, D_6, F_6}, | |||
{0, E_5, D_5, F_5}, | |||
{0, E_4, D_4, F_4}, | |||
{0, E_3, D_3, F_3}, | |||
{0, E_2, D_2, F_2}, | |||
{0, E_1, D_1, F_1}, | |||
{0, B_14, A_14, C_14}, | |||
{0, B_13, A_13, C_13}, | |||
{0, B_11, A_11, C_11}, | |||
{0, B_10, A_10, C_10}, | |||
{0, B_9, A_9, C_9}, | |||
{0, B_8, A_8, C_8}, | |||
{0, B_7, A_7, C_7}, | |||
{0, B_6, A_6, C_6}, | |||
{0, B_5, A_5, C_5}, | |||
{0, B_4, A_4, C_4}, | |||
{0, B_3, A_3, C_3}, | |||
{0, B_2, A_2, C_2}, | |||
{0, B_1, A_1, C_1}, | |||
{0, B_15, A_15, C_15}, | |||
{0, E_13, D_13, F_13}, | |||
{0, B_12, A_12, C_12}, | |||
{0, E_15, D_15, F_15}, | |||
{0, H_15, G_15, I_15}, | |||
{0, B_16, A_16, C_16}, | |||
{0, E_16, D_16, F_16}, | |||
{0, H_16, G_16, I_16}, | |||
{0, K_16, J_16, L_16}, | |||
}; | |||
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { | |||
{{0|(13<<4)}, {17.23*13, 0}, 1}, | |||
{{0|(12<<4)}, {17.23*12, 0}, 1}, | |||
{{0|(11<<4)}, {17.23*11, 0}, 1}, | |||
{{0|(10<<4)}, {17.23*10, 0}, 1}, | |||
{{0|(9<<4)}, {17.23*9, 0}, 1}, | |||
{{0|(8<<4)}, {17.23*8, 0}, 1}, | |||
{{0|(7<<4)}, {17.23*7, 0}, 1}, | |||
{{0|(6<<4)}, { 17.23*6, 0}, 1}, | |||
{{0|(5<<4)}, { 17.23*5, 0}, 1}, | |||
{{0|(4<<4)}, { 17.23*4, 0}, 1}, | |||
{{0|(3<<4)}, { 17.23*3, 0}, 1}, | |||
{{0|(2<<4)}, { 17.23*2, 0}, 1}, | |||
{{0|(1<<4)}, { 17.23*1, 0}, 1}, | |||
{{0|(0<<4)}, { 17.23*0, 0}, 1}, | |||
{{1|(13<<4)}, {17.23*13, 16}, 1}, | |||
{{1|(12<<4)}, {17.23*12, 16}, 0}, | |||
{{1|(11<<4)}, {17.23*11, 16}, 0}, | |||
{{1|(10<<4)}, {17.23*10, 16}, 0}, | |||
{{1|(9<<4)}, {17.23*9, 16}, 0}, | |||
{{1|(8<<4)}, {17.23*8, 16}, 0}, | |||
{{1|(7<<4)}, {17.23*7, 16}, 0}, | |||
{{1|(6<<4)}, { 17.23*6, 16}, 0}, | |||
{{1|(5<<4)}, { 17.23*5, 16}, 0}, | |||
{{1|(4<<4)}, { 17.23*4, 16}, 0}, | |||
{{1|(3<<4)}, { 17.23*3, 16}, 0}, | |||
{{1|(2<<4)}, { 17.23*2, 16}, 0}, | |||
{{1|(1<<4)}, { 17.23*1, 16}, 0}, | |||
{{1|(0<<4)}, { 17.23*0, 16}, 1}, | |||
{{2|(13<<4)}, {17.23*13, 32}, 1}, | |||
{{2|(11<<4)}, {17.23*11, 32}, 0}, | |||
{{2|(10<<4)}, {17.23*10, 32}, 0}, | |||
{{2|(9<<4)}, {17.23*9, 32}, 0}, | |||
{{2|(8<<4)}, {17.23*8, 32}, 0}, | |||
{{2|(7<<4)}, {17.23*7, 32}, 0}, | |||
{{2|(6<<4)}, { 17.23*6, 32}, 0}, | |||
{{2|(5<<4)}, { 17.23*5, 32}, 0}, | |||
{{2|(4<<4)}, { 17.23*4, 32}, 0}, | |||
{{2|(3<<4)}, { 17.23*3, 32}, 0}, | |||
{{2|(2<<4)}, { 17.23*2, 32}, 0}, | |||
{{2|(1<<4)}, { 17.23*1, 32}, 0}, | |||
{{2|(0<<4)}, { 17.23*0, 32}, 1}, | |||
{{3|(13<<4)}, {17.23*13, 48}, 1}, | |||
{{3|(11<<4)}, {17.23*11, 48}, 0}, | |||
{{3|(10<<4)}, {17.23*10, 48}, 0}, | |||
{{3|(9<<4)}, {17.23*9, 48}, 0}, | |||
{{3|(8<<4)}, {17.23*8, 48}, 0}, | |||
{{3|(7<<4)}, {17.23*7, 48}, 0}, | |||
{{3|(6<<4)}, { 17.23*6, 48}, 0}, | |||
{{3|(5<<4)}, { 17.23*5, 48}, 0}, | |||
{{3|(4<<4)}, { 17.23*4, 48}, 0}, | |||
{{3|(3<<4)}, { 17.23*3, 48}, 0}, | |||
{{3|(2<<4)}, { 17.23*2, 48}, 0}, | |||
{{3|(1<<4)}, { 17.23*1, 48}, 0}, | |||
{{3|(0<<4)}, { 17.23*0, 48}, 1}, | |||
{{4|(13<<4)}, {17.23*13, 64}, 1}, | |||
{{4|(11<<4)}, {17.23*11, 64}, 1}, | |||
{{4|(10<<4)}, {17.23*10, 64}, 1}, | |||
{{4|(9<<4)}, {17.23*9, 64}, 1}, | |||
{{4|(8<<4)}, {17.23*8, 64}, 1}, | |||
{{4|(5<<4)}, { 17.23*5, 64}, 0}, | |||
{{4|(2<<4)}, { 17.23*2, 64}, 1}, | |||
{{4|(1<<4)}, { 17.23*1, 64}, 1}, | |||
{{4|(0<<4)}, { 17.23*0, 64}, 1}, | |||
}; | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
return process_record_user(keycode, record); | |||
} | |||
void suspend_power_down_kb(void) | |||
{ | |||
rgb_matrix_set_suspend_state(true); | |||
} | |||
void suspend_wakeup_init_kb(void) | |||
{ | |||
rgb_matrix_set_suspend_state(false); | |||
} |
@ -0,0 +1,16 @@ | |||
#pragma once | |||
#define XXX KC_NO | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ | |||
K40, K41, K42, K45, K48, K49, K4A, K4B, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ | |||
{ K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D } \ | |||
} |
@ -0,0 +1,388 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef HALCONF_H | |||
#define HALCONF_H | |||
#include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_PAL TRUE | |||
#endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
#define HAL_USE_ADC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
#define HAL_USE_CAN FALSE | |||
#endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_DAC TRUE | |||
#endif | |||
/** | |||
* @brief Enables the EXT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) | |||
#define HAL_USE_EXT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
#define HAL_USE_GPT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2C TRUE | |||
#endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2S FALSE | |||
#endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
#define HAL_USE_ICU FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_MAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_MMC_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
#define HAL_USE_PWM FALSE | |||
#endif | |||
/** | |||
* @brief Enables the QSPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_QSPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
#define HAL_USE_RTC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
#define HAL_USE_SDC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL_USB FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
#define HAL_USE_UART FALSE | |||
#endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_USB TRUE | |||
#endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
#define HAL_USE_WDG FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define ADC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
#define CAN_USE_SLEEP_MODE TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
#define MAC_USE_ZERO_COPY FALSE | |||
#endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
#define MAC_USE_EVENTS TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define MMC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
#define SDC_INIT_RETRY 100 | |||
#endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
#define SDC_MMC_SUPPORT FALSE | |||
#endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define SDC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
#define SERIAL_DEFAULT_BITRATE 38400 | |||
#endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 16 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_BUFFERS_SIZE 16 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 256 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_SIZE 1 | |||
#endif | |||
/** | |||
* @brief Serial over USB number of buffers. | |||
* @note The default is 2 buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_NUMBER 2 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define SPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* UART driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
#define UART_USE_WAIT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define UART_USE_MUTUAL_EXCLUSION FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
#define USB_USE_WAIT TRUE | |||
#endif | |||
#endif /* HALCONF_H */ | |||
/** @} */ |
@ -0,0 +1,16 @@ | |||
{ | |||
"keyboard_name": "dz60rgb", | |||
"url": "", | |||
"maintainer": "dz", | |||
"width": 14, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, | |||
{"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, | |||
{"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, | |||
{"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"up", "x":13, "y":3},{"label":"?", "x":14, "y":3}, | |||
{"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4},] | |||
} | |||
} | |||
} |
@ -0,0 +1,165 @@ | |||
#include QMK_KEYBOARD_H | |||
extern bool g_suspend_state; | |||
#define _LAYER0 0 | |||
#define _LAYER1 1 | |||
#define _LAYER2 2 | |||
#define _LAYER3 3 | |||
#define _LAYER4 4 | |||
#define _LAYER5 5 | |||
#define _LAYER6 6 | |||
#define _LAYER7 7 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAYER0] = LAYOUT( /* Base */ | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ | |||
CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ | |||
KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1) , KC_LEFT, KC_DOWN, KC_RIGHT), | |||
[_LAYER1] = LAYOUT( /* FN */ | |||
TO(3), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ | |||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ | |||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_VOLU, KC_MUTE,\ | |||
KC_TRNS, KC_TRNS, KC_TRNS, TO(4), KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT), | |||
[_LAYER2] = LAYOUT( /* LIGHT */ | |||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ | |||
KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
[_LAYER3] = LAYOUT( /* NUMPAD */ | |||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, KC_TRNS,\ | |||
KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, TO(0),\ | |||
KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_PENT,\ | |||
KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_TRNS, KC_TRNS,\ | |||
KC_TRNS, KC_P0, KC_PDOT, KC_PENT, KC_P0, KC_PDOT, KC_TRNS, KC_TRNS, KC_TRNS), | |||
[_LAYER4] = LAYOUT( /* MAC */ | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ | |||
CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ | |||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(5) , KC_LEFT, KC_DOWN, KC_RIGHT), | |||
}; | |||
void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { | |||
rgb_led led; | |||
for (int i = 0; i < DRIVER_LED_TOTAL; i++) { | |||
led = g_rgb_leds[i]; | |||
if (led.matrix_co.raw < 0xFF) { | |||
if (led.modifier) { | |||
rgb_matrix_set_color( i, red, green, blue ); | |||
} | |||
} | |||
} | |||
} | |||
void rgb_matrix_indicators_user(void) { | |||
uint8_t this_led = host_keyboard_leds(); | |||
if (!g_suspend_state) { | |||
switch (biton32(layer_state)) { | |||
case _LAYER1: | |||
rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; | |||
case _LAYER2: | |||
rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; | |||
case _LAYER4: | |||
rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; | |||
} | |||
} | |||
if ( this_led & (1<<USB_LED_CAPS_LOCK)) { | |||
rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); | |||
} | |||
switch (biton32(layer_state)) { | |||
case _LAYER3: | |||
if ( this_led & (1<<USB_LED_NUM_LOCK)) | |||
{ | |||
rgb_matrix_set_color(13, 0xFF, 0x00, 0x00); | |||
} | |||
else | |||
{ | |||
rgb_matrix_set_color(13, 0x00, 0x00, 0x00); | |||
} | |||
rgb_matrix_set_color(0, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(1, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(1, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(2, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(3, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(4, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(5, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(6, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(7, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(8, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(9, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(10, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(11, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(12, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(14, 0x00, 0x00, 0xFF); | |||
rgb_matrix_set_color(15, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(16, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(17, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(18, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(19, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(20, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(21, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(22, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(23, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(24, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(25, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(26, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(27, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(28, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(29, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(30, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(31, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(32, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(33, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(34, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(35, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(36, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(37, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(38, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(39, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(40, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(41, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(42, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(43, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(44, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(45, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(46, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(47, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(48, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(49, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(50, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(51, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(52, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(53, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(54, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(55, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(56, 0x00, 0x00, 0x00); | |||
rgb_matrix_set_color(57, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(58, 0x00, 0xFF, 0x00); | |||
rgb_matrix_set_color(59, 0xFF, 0x00, 0x00); | |||
rgb_matrix_set_color(60, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(61, 0xFF, 0xFF, 0x00); | |||
rgb_matrix_set_color(62, 0x00, 0x00, 0x00); | |||
break; | |||
} | |||
} | |||
void matrix_init_user(void) { | |||
//user initialization | |||
} | |||
void matrix_scan_user(void) { | |||
//user matrix | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} |
@ -0,0 +1,257 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef MCUCONF_H | |||
#define MCUCONF_H | |||
/* | |||
* STM32F3xx drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 15...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
#define STM32F3xx_MCUCONF | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_LSI_ENABLED TRUE | |||
#define STM32_HSE_ENABLED TRUE | |||
#define STM32_LSE_ENABLED FALSE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||
#define STM32_PREDIV_VALUE 1 | |||
#define STM32_PLLMUL_VALUE 9 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||
#define STM32_PPRE2 STM32_PPRE2_DIV2 | |||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 | |||
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 | |||
#define STM32_USART1SW STM32_USART1SW_PCLK | |||
#define STM32_USART2SW STM32_USART2SW_PCLK | |||
#define STM32_USART3SW STM32_USART3SW_PCLK | |||
#define STM32_UART4SW STM32_UART4SW_PCLK | |||
#define STM32_UART5SW STM32_UART5SW_PCLK | |||
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK | |||
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK | |||
#define STM32_TIM1SW STM32_TIM1SW_PCLK2 | |||
#define STM32_TIM8SW STM32_TIM8SW_PCLK2 | |||
#define STM32_RTCSEL STM32_RTCSEL_LSI | |||
#define STM32_USB_CLOCK_REQUIRED TRUE | |||
#define STM32_USBPRE STM32_USBPRE_DIV1P5 | |||
#undef STM32_HSE_BYPASS | |||
// #error "oh no" | |||
// #endif | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_DUAL_MODE FALSE | |||
#define STM32_ADC_COMPACT_SAMPLES FALSE | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_USE_ADC2 FALSE | |||
#define STM32_ADC_USE_ADC3 FALSE | |||
#define STM32_ADC_USE_ADC4 FALSE | |||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) | |||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) | |||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC2_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC3_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC4_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 | |||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 | |||
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 | |||
/* | |||
* CAN driver system settings. | |||
*/ | |||
#define STM32_CAN_USE_CAN1 FALSE | |||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 | |||
/* | |||
* DAC driver system settings. | |||
*/ | |||
#define STM32_DAC_DUAL_MODE FALSE | |||
#define STM32_DAC_USE_DAC1_CH1 TRUE | |||
#define STM32_DAC_USE_DAC1_CH2 TRUE | |||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 | |||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 | |||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 | |||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 | |||
/* | |||
* EXT driver system settings. | |||
*/ | |||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM4 FALSE | |||
#define STM32_GPT_USE_TIM6 TRUE | |||
#define STM32_GPT_USE_TIM7 TRUE | |||
#define STM32_GPT_USE_TIM8 TRUE | |||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM6_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM7_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 TRUE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 10 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 10 | |||
#define STM32_I2C_USE_DMA TRUE | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 1 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 1 | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_USE_TIM4 FALSE | |||
#define STM32_ICU_USE_TIM8 FALSE | |||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_ADVANCED FALSE | |||
#define STM32_PWM_USE_TIM1 FALSE | |||
#define STM32_PWM_USE_TIM2 FALSE | |||
#define STM32_PWM_USE_TIM3 FALSE | |||
#define STM32_PWM_USE_TIM4 FALSE | |||
#define STM32_PWM_USE_TIM8 FALSE | |||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 FALSE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USE_USART3 FALSE | |||
#define STM32_SERIAL_USE_UART4 FALSE | |||
#define STM32_SERIAL_USE_UART5 FALSE | |||
#define STM32_SERIAL_USART1_PRIORITY 12 | |||
#define STM32_SERIAL_USART2_PRIORITY 12 | |||
#define STM32_SERIAL_USART3_PRIORITY 12 | |||
#define STM32_SERIAL_UART4_PRIORITY 12 | |||
#define STM32_SERIAL_UART5_PRIORITY 12 | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 FALSE | |||
#define STM32_SPI_USE_SPI2 FALSE | |||
#define STM32_SPI_USE_SPI3 FALSE | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 8 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USE_USART3 FALSE | |||
#define STM32_UART_USART1_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART2_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART3_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_USART3_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_USB1 TRUE | |||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 | |||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 | |||
/* | |||
* WDG driver system settings. | |||
*/ | |||
#define STM32_WDG_USE_IWDG FALSE | |||
#endif /* MCUCONF_H */ |
@ -0,0 +1,15 @@ | |||
# DZ60RGB | |||
![dz60rgb](https://cdn.shopify.com/s/files/1/0043/9140/3591/products/TIM_20190130170231_grande.jpg?v=1548839053) | |||
A customizable 60% RGB keyboard. | |||
Keyboard Maintainer: DZtech | |||
Hardware Supported: DZtech | |||
Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) | |||
Make example for this keyboard (after setting up your build environment): | |||
make dztech/dz60rgb:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,57 @@ | |||
# project specific files | |||
## chip/board settings | |||
# the next two should match the directories in | |||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||
MCU_FAMILY = STM32 | |||
MCU_SERIES = STM32F3xx | |||
# Linker script to use | |||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||
# or <this_dir>/ld/ | |||
MCU_LDSCRIPT = STM32F303xC | |||
# Startup code to use | |||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ | |||
MCU_STARTUP = stm32f3xx | |||
# Board: it should exist either in <chibios>/os/hal/boards/ | |||
# or <this_dir>/boards | |||
BOARD = GENERIC_STM32_F303XC | |||
# Cortex version | |||
MCU = cortex-m4 | |||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||
ARMV = 7 | |||
USE_FPU = yes | |||
# Vector table for application | |||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ | |||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB | |||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 | |||
OPT_DEFS = | |||
# Do not put the microcontroller into power saving mode | |||
# when we get USB suspend event. We want it to keep updating | |||
# backlight effects. | |||
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN | |||
# Options to pass to dfu-util when flashing | |||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BACKLIGHT_ENABLE = no | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
AUDIO_ENABLE = no | |||
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix | |||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in |