@ -0,0 +1,112 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
# CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality | |||
# MIDI_ENABLE ?= YES # MIDI controls | |||
# UNICODE_ENABLE ?= YES # Unicode | |||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif | |||
@ -0,0 +1,190 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER geekhack | |||
#define PRODUCT GH60 | |||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } | |||
// Rev A | |||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } | |||
// Rev B/C | |||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* RGB Underglow | |||
* These settings are for the F4 by default: | |||
* | |||
* | |||
* #define ws2812_PORTREG PORTF | |||
* #define ws2812_DDRREG DDRF | |||
* #define ws2812_pin PF4 | |||
* #define RGBLED_NUM 14 // Number of LEDs | |||
* #define RGBLIGHT_HUE_STEP 10 | |||
* #define RGBLIGHT_SAT_STEP 17 | |||
* #define RGBLIGHT_VAL_STEP 17 | |||
* | |||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. | |||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. | |||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c | |||
*/ | |||
/* Deprecated code below | |||
#define ws2812_PORTREG PORTF | |||
#define ws2812_DDRREG DDRF | |||
#define ws2812_pin PF4 | |||
*/ | |||
#define RGB_DI_PIN F4 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 8 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif |
@ -0,0 +1,228 @@ | |||
#include "gh60.h" | |||
#include "action_layer.h" | |||
#define _BL 0 | |||
#define _AL 1 | |||
#define _FL 2 | |||
#define _UL 3 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
* Base layer, pretty standard ANSI layout. | |||
* ,-----------------------------------------------------------. | |||
* |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | | |||
* |-----------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | |||
* |-----------------------------------------------------------| | |||
* |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \ | |||
TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \ | |||
FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \ | |||
LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \ | |||
LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), | |||
/* | |||
* Locking arrow keys to WASD for when you need dedicated arrow keys | |||
* ,-----------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | |Up | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | |Left|Down|Rght| | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_AL] = KEYMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), | |||
/* | |||
* Primary function layer, mostly the same as the traditional Pok3r layout. | |||
* ,-------------------------------------------------------------. | |||
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | | |||
* |-------------------------------------------------------------| | |||
* | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | | |||
* |-------------------------------------------------------------| | |||
* | | | | | | |Home|Left|Down|Rght|Ins| | | | |||
* |-------------------------------------------------------------| | |||
* | |_UL| | | | | | | | | | | | |||
* |-------------------------------------------------------------| | |||
* | | | | | | | | | | |||
* `-------------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \ | |||
TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \ | |||
TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), | |||
/* | |||
* Locking layer for controlling the underglow. | |||
* | |||
* ,-----------------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | |On|Mode| | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_UL] = KEYMAP( | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \ | |||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), | |||
}; | |||
enum function_id { | |||
RGBLED_TOGGLE, | |||
RGBLED_STEP_MODE, | |||
RGBLED_INCREASE_HUE, | |||
RGBLED_DECREASE_HUE, | |||
RGBLED_INCREASE_SAT, | |||
RGBLED_DECREASE_SAT, | |||
RGBLED_INCREASE_VAL, | |||
RGBLED_DECREASE_VAL, | |||
SHIFT_ESC, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay | |||
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay | |||
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer | |||
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay | |||
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow | |||
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode | |||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), | |||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), | |||
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), | |||
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), | |||
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), | |||
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), | |||
[12] = ACTION_FUNCTION(SHIFT_ESC), | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
// MACRODOWN only works in this function | |||
// This is some kind of macro code, haven't quite figured it out yet. | |||
// Todo: Figure out macro coding here | |||
switch(id) { | |||
case 0: | |||
if (record->event.pressed) { | |||
register_code(KC_RSFT); | |||
} else { | |||
unregister_code(KC_RSFT); | |||
} | |||
break; | |||
} | |||
return MACRO_NONE; | |||
}; | |||
void matrix_scan_user(void) { | |||
// Layer LED indicators | |||
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster | |||
// Todo: Caps lock led on when caps lock is enabled | |||
uint32_t layer = layer_state; | |||
if (layer & (1<<1)) { | |||
gh60_wasd_leds_on(); | |||
} else { | |||
gh60_wasd_leds_off(); | |||
} | |||
if (layer & (1<<2)) { | |||
gh60_esc_led_on(); | |||
} else { | |||
gh60_esc_led_off(); | |||
} | |||
}; | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
switch (id) { | |||
case RGBLED_TOGGLE: | |||
//led operations | |||
if (record->event.pressed) { | |||
rgblight_toggle(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_increase_hue(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_decrease_hue(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_increase_sat(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_decrease_sat(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_increase_val(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_decrease_val(); | |||
} | |||
break; | |||
case RGBLED_STEP_MODE: | |||
if (record->event.pressed) { | |||
rgblight_step(); | |||
} | |||
break; | |||
static uint8_t shift_esc_shift_mask; | |||
case SHIFT_ESC: | |||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||
if (record->event.pressed) { | |||
if (shift_esc_shift_mask) { | |||
add_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
add_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
if (shift_esc_shift_mask) { | |||
del_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
del_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} | |||
break; | |||
} | |||
}; |
@ -0,0 +1,16 @@ | |||
robotmaxtron's GH60 Layout | |||
===================== | |||
##Quantum MK Firmware | |||
For the full Quantum feature list, see the parent readme.md. | |||
* Standard ANSI layout with Pok3r styled function layers | |||
* ESC key led enables when on function layer | |||
* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer | |||
* Neopixel/WS2812 RGB Underglow Support | |||
## Reference Images | |||
![Wiring Refererence] (WS2812-wiring.jpg) | |||
### Additional Credits | |||
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. |