That-Canadian
6 years ago
28 changed files with 1155 additions and 110 deletions
Split View
Diff Options
-
+5 -3book.json
-
+38 -0docs/documentation_best_practices.md
-
+56 -54docs/faq.md
-
+142 -1docs/glossary.md
-
+3 -0keyboards/bananasplit/Makefile
-
+29 -0keyboards/bananasplit/README.md
-
+28 -0keyboards/bananasplit/bananasplit.c
-
+107 -0keyboards/bananasplit/bananasplit.h
-
+81 -0keyboards/bananasplit/config.h
-
+25 -0keyboards/bananasplit/keymaps/default/keymap.c
-
+25 -0keyboards/bananasplit/keymaps/hhkbanana/keymap.c
-
+45 -0keyboards/bananasplit/keymaps/nic/keymap.c
-
+65 -0keyboards/bananasplit/rules.mk
-
+2 -0keyboards/nyquist/eeprom-lefthand.eep
-
+2 -0keyboards/nyquist/eeprom-righthand.eep
-
+2 -0keyboards/nyquist/keymaps/default/Makefile
-
+7 -0keyboards/nyquist/keymaps/default/config.h
-
+2 -2keyboards/nyquist/keymaps/default/keymap.c
-
+195 -47keyboards/nyquist/matrix.c
-
+2 -0keyboards/nyquist/split_util.c
-
+3 -3keyboards/satan/keymaps/poker/keymap.c
-
+3 -0keyboards/uk78/Makefile
-
+76 -0keyboards/uk78/config.h
-
+119 -0keyboards/uk78/keymaps/default/keymap.c
-
+16 -0keyboards/uk78/readme.md
-
+56 -0keyboards/uk78/rules.mk
-
+1 -0keyboards/uk78/uk78.c
-
+20 -0keyboards/uk78/uk78.h
+ 5
- 3
book.json
View File
+ 38
- 0
docs/documentation_best_practices.md
View File
+ 56
- 54
docs/faq.md
View File
+ 142
- 1
docs/glossary.md
View File
| @ -1,29 +1,170 @@ | |||
| # Glossary of QMK terms | |||
| ## ARM | |||
| A line of 32-bit MCU's produced by a number of companies, such as Atmel, Cypress, Kinetis, NXP, ST, and TI. | |||
| ## AVR | |||
| A line of 8-bit MCU's produced by [Atmel](http://atmel.com). AVR was the original platform that TMK supported. | |||
| ## AZERTY | |||
| The standard Français (French) keyboard layout. Named for the first 6 keys on the keyboard. | |||
| ## Backlight | |||
| A generic term for lighting on a keyboard. The backlight is typically, but not always, an array of LED's that shine through keycaps and/or switches. | |||
| ## Bluetooth | |||
| A short range peer to peer wireless protocol. Most common wireless protocol for a keyboard. | |||
| ## Bootloader | |||
| A special program that is written to a protected area of your MCU that allows the MCU to upgrade its own firmware, typically over USB. | |||
| ## Bootmagic | |||
| A feature that allows for various keyboard behavior changes to happen on the fly, such as swapping or disabling common keys. | |||
| ## C | |||
| A low-level programming language suitable for system code. Most QMK code is written in C. | |||
| ## Colemak | |||
| An alternative keyboard layout that is gaining in popularity. | |||
| ## Compile | |||
| The process of turning human readable code into machine code your MCU can run. | |||
| ## Dvorak | |||
| An alternative keyboard layout developed by Dr. August Dvorak in the 1930's. A shortened form of the Dvorak Simplified Keyboard. | |||
| ## Dynamic Macro | |||
| A macro which has been recorded on the keyboard and which will be lost when the keyboard is unplugged or the computer rebooted. | |||
| * [Dynamic Macro Documentation](dynamic_macros.html) | |||
| ## Eclipse | |||
| An IDE that is popular with many C developers. | |||
| * [Eclipse Setup Instructions](eclipse.html) | |||
| ## Firmware | |||
| The software that controls your MCU. | |||
| ## FLIP | |||
| Software provided by Atmel for flashing AVR devices. We generally recommend [QMK Flasher](https://github.com/qmk/qmk_flasher) instead, but for some advanced use cases FLIP is required. | |||
| ## git | |||
| Versioning software used at the commandline | |||
| ## GitHub | |||
| The website that hosts most of the QMK project. It provides integration with git, issue tracking, and other features that help us run QMK. | |||
| ## ISP | |||
| In-system programming, a method of programming an AVR chip using external hardware and the JTAG pins. | |||
| ## hid_listen | |||
| An interface for receiving debugging messages from your keyboard. You can view these messages using [QMK Flasher](https://github.com/qmk/qmk_flasher) or [PJRC's hid_listen](https://www.pjrc.com/teensy/hid_listen.html) | |||
| ## Keycode | |||
| A 2-byte number that represents a particular key. `0x00`-`0xFF` are used for [Basic Keycodes](keycodes.html) while `0x100`-`0xFFFF` are used for [Quantum Keycodes](quantum_keycodes.html). | |||
| ## Key Down | |||
| An event that happens when a key is pressed down, but is completed before a key is released. | |||
| ## Key Up | |||
| An event that happens when a key is released. | |||
| ## Keymap | |||
| An array of keycodes mapped to a physical keyboard layout, which are processed on key presses and releases | |||
| ## Layer | |||
| An abstraction used to allow a key to serve multiple purposes. The highest active layer takes precedence. | |||
| ## Leader Key | |||
| A feature that allows you to tap the leader key followed by a sequence of 1, 2, or 3 keys to activate key presses or other quantum features. | |||
| * [Leader Key Documentation](leader_key.html) | |||
| ## LED | |||
| Light Emitting Diode, the most common device used for indicators on a keyboard. | |||
| ## Make | |||
| Software package that is used to compile all the source files. You run `make` with various options to compile your keyboard firmware. | |||
| ## Matrix | |||
| A wiring pattern of columns and rows (and usually diodes) that enables the MCU to detect keypresses with a fewer number of pins | |||
| A wiring pattern of columns and rows that enables the MCU to detect keypresses with a fewer number of pins. The matrix often incorporates diodes to allow for NKRO. | |||
| ## Macro | |||
| A feature that lets you send muiltple keypress events (hid reports) after having pressed only a single key. | |||
| * [Macro Documentation](macros.html) | |||
| ## MCU | |||
| Microcontrol Unit, the processor that powers your keyboard. | |||
| ## Modifier | |||
| A key that is held down while typing another key to modify the action of that key. Examples include Ctrl, Alt, and Shift. | |||
| ## Mousekeys | |||
| A feature that lets you control your mouse cursor and click from your keyboard. | |||
| * [Mousekeys Documentation](mouse_keys.html) | |||
| ## N-Key Rollover (NKRO) | |||
| A term that applies to keyboards that are capable of reporting any number of key-presses at once. | |||
| ## Oneshot Modifier | |||
| A modifier that acts as if it is held down until another key is released, so you can press the mod and then press the key, rather than holding the mod while pressing the key. | |||
| ## ProMicro | |||
| A low cost AVR development board. Clones of this device are often found on ebay very inexpensively (under $5) but people often struggle with flashing their pro micros. | |||
| ## Pull Request | |||
| A request to submit code to QMK. We encourage all users to submit Pull Requests for their personal keymaps. | |||
| ## QWERTY | |||
| The standard English keyboard layout, and often a shortcut for other language's standard layouts. Named for the first 6 letters on the keyboard. | |||
| ## QWERTZ | |||
| The standard Deutsche (German) keyboard layout. Named for the first 6 letters on the keyboard. | |||
| ## Rollover | |||
| The term for pressing a key while a key is already held down. Variants include 2KRO, 6KRO, and NKRO. | |||
| ## Scancode | |||
| A 1 byte number that is sent as part of a HID report over USB that represents a single key. These numbers are documented in the [HID Usage Tables](http://www.usb.org/developers/hidpage/Hut1_12v2.pdf) published by the [USB-IF](http://www.usb.org/). | |||
| ## Space Cadet Shift | |||
| A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times. | |||
| * [Space Cadet Shift Documentation](space_cadet_shift.html) | |||
| ## Tap | |||
| Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once. | |||
| ## Tap Dance | |||
| A feature that lets you assign muiltple keycodes to the same key based on how many times you press it. | |||
| * [Tap Dance Documentation](tap_dance.html) | |||
| ## Teensy | |||
| A low-cost AVR development board that is commonly used for hand-wired builds. A teensy is often chosen despite costing a few dollors more due to its halfkay bootloader, which makes flashing very simple. | |||
| ## Underlight | |||
| A generic term for LEDs that light the underside of the board. These LED's typically shine away from the bottom of the PCB and towards the surface the keyboard rests on. | |||
| ## Unicode | |||
| In the larger computer world Unicode is a set of encoding schemes for representing characters in any language. As it relates to QMK it means using various OS schemes to send unicode codepoints instead of scancodes. | |||
| * [Unicode Documentation](unicode.html) | |||
| ## Unit Testing | |||
| A framework for running automated tests against QMK. Unit testing helps us be confident that our changes do not break anything. | |||
| * [Unit Testing Documentation](unit_testing.html) | |||
| ## USB | |||
| Universal Serial Bus, the most common wired interface for a keyboard. | |||
| ## USB Host (or simply Host) | |||
| The USB Host is your computer, or whatever device your keyboard is plugged into. | |||
| # Couldn't find the term you're looking for? | |||
| [Open an issue](https://github.com/qmk/qmk_firmware/issues) with your question and the term in question could be added here. Better still, open a pull request with the definition. :) | |||
+ 3
- 0
keyboards/bananasplit/Makefile
View File
| @ -0,0 +1,3 @@ | |||
| ifndef MAKEFILE_INCLUDED | |||
| include ../../Makefile | |||
| endif | |||
+ 29
- 0
keyboards/bananasplit/README.md
View File
| @ -0,0 +1,29 @@ | |||
| # BananaSplit60 keyboard firmware | |||
| Ported from evangs/tmk_keyboard | |||
| ## Quantum MK Firmware | |||
| For the full Quantum feature list, see [the parent readme](/). | |||
| ## Building | |||
| Download or clone the whole firmware and navigate to the keyboards/bananasplit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. | |||
| Depending on which keymap you would like to use, you will have to compile slightly differently. | |||
| ### Default | |||
| To build with the default keymap, simply run `make default`. | |||
| ### Other Keymaps | |||
| Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. | |||
| To build the firmware binary hex file with a keymap just do `make` with a keymap like this: | |||
| ``` | |||
| $ make [default|jack|<name>] | |||
| ``` | |||
| Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. | |||
+ 28
- 0
keyboards/bananasplit/bananasplit.c
View File
| @ -0,0 +1,28 @@ | |||
| #include "bananasplit.h" | |||
| void matrix_init_kb(void) { | |||
| // put your keyboard start-up code here | |||
| // runs once when the firmware starts up | |||
| matrix_init_user(); | |||
| } | |||
| void matrix_scan_kb(void) { | |||
| // put your looping keyboard code here | |||
| // runs every cycle (a lot) | |||
| matrix_scan_user(); | |||
| } | |||
| bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
| // put your per-action keyboard code here | |||
| // runs for every action, just before processing by the firmware | |||
| return process_record_user(keycode, record); | |||
| } | |||
| void led_set_kb(uint8_t usb_led) { | |||
| // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
| led_set_user(usb_led); | |||
| } | |||
+ 107
- 0
keyboards/bananasplit/bananasplit.h
View File
| @ -0,0 +1,107 @@ | |||
| /* | |||
| Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||
| This program is free software: you can redistribute it and/or modify | |||
| it under the terms of the GNU General Public License as published by | |||
| the Free Software Foundation, either version 2 of the License, or | |||
| (at your option) any later version. | |||
| This program is distributed in the hope that it will be useful, | |||
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
| GNU General Public License for more details. | |||
| You should have received a copy of the GNU General Public License | |||
| along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
| */ | |||
| #ifndef BANANASPLIT_H | |||
| #define BANANASPLIT_H | |||
| #include "quantum.h" | |||
| #define KEYMAP( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ | |||
| K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ | |||
| K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ | |||
| { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||
| { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C } \ | |||
| } | |||
| #define KEYMAP_HHKBANANA( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ | |||
| K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ | |||
| K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||
| { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ | |||
| { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C } \ | |||
| } | |||
| #define KEYMAP_ANSI( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ | |||
| K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ | |||
| K40, K41, K42, K45, K48, K49, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ | |||
| { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ | |||
| { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, K48, K49, KC_NO, K4B, K4C } \ | |||
| } | |||
| #define KEYMAP_ISO( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ | |||
| K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ | |||
| K40, K41, K42, K45, K48, K49, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ | |||
| { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ | |||
| { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, K48, K49, KC_NO, K4B, K4C } \ | |||
| } | |||
| #define KEYMAP_ALL( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\ | |||
| K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,\ | |||
| K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||
| { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||
| { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C } \ | |||
| } | |||
| #define KEYMAP_HHKB_ARROW( \ | |||
| K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ | |||
| K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
| K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\ | |||
| K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,\ | |||
| K40, K41, K42, K44, K45, K46, K48, K49, K4A, K4B, K4C \ | |||
| ) { \ | |||
| { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
| { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
| { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||
| { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||
| { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C } \ | |||
| } | |||
| #endif | |||
+ 81
- 0
keyboards/bananasplit/config.h
View File
| @ -0,0 +1,81 @@ | |||
| /* | |||
| Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
| This program is free software: you can redistribute it and/or modify | |||
| it under the terms of the GNU General Public License as published by | |||
| the Free Software Foundation, either version 2 of the License, or | |||
| (at your option) any later version. | |||
| This program is distributed in the hope that it will be useful, | |||
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
| GNU General Public License for more details. | |||
| You should have received a copy of the GNU General Public License | |||
| along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
| */ | |||
| #ifndef CONFIG_H | |||
| #define CONFIG_H | |||
| #include "config_common.h" | |||
| /* USB Device descriptor parameter */ | |||
| #define VENDOR_ID 0xFEAE | |||
| #define PRODUCT_ID 0x8870 | |||
| #define DEVICE_VER 0x0001 | |||
| #define MANUFACTURER TheVan Keyboards | |||
| #define PRODUCT BananaSplit 60 | |||
| #define DESCRIPTION keyboard firmware for BananaSplit 60 | |||
| /* key matrix size */ | |||
| #define MATRIX_ROWS 5 | |||
| #define MATRIX_COLS 14 | |||
| #define MATRIX_ROW_PINS { B0, B2, B4, B5, B6 } | |||
| #define MATRIX_COL_PINS { F5, B1, F0, F1, F4, B3, D7, D6, D4, D5, D3, D2, D1, D0 } | |||
| #define UNUSED_PINS | |||
| #define DIODE_DIRECTION ROW2COL | |||
| /* define if matrix has ghost */ | |||
| //#define MATRIX_HAS_GHOST | |||
| /* number of backlight levels */ | |||
| #define BACKLIGHT_LEVELS 1 | |||
| /* Set 0 if debouncing isn't needed */ | |||
| #define DEBOUNCING_DELAY 5 | |||
| #define TAPPING_TERM 175 | |||
| /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
| #define LOCKING_SUPPORT_ENABLE | |||
| /* Locking resynchronize hack */ | |||
| #define LOCKING_RESYNC_ENABLE | |||
| /* key combination for command */ | |||
| #define IS_COMMAND() ( \ | |||
| keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
| ) | |||
| /* | |||
| * Feature disable options | |||
| * These options are also useful to firmware size reduction. | |||
| */ | |||
| /* disable debug print */ | |||
| //#define NO_DEBUG | |||
| /* disable print */ | |||
| //#define NO_PRINT | |||
| /* disable action features */ | |||
| //#define NO_ACTION_LAYER | |||
| //#define NO_ACTION_TAPPING | |||
| //#define NO_ACTION_ONESHOT | |||
| //#define NO_ACTION_MACRO | |||
| //#define NO_ACTION_FUNCTION | |||
| #endif | |||
+ 25
- 0
keyboards/bananasplit/keymaps/default/keymap.c
View File
| @ -0,0 +1,25 @@ | |||
| #include "bananasplit.h" | |||
| #define DEFAULT_LAYER 0 | |||
| #define LAYER_1 1 | |||
| const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
| [DEFAULT_LAYER] = KEYMAP( | |||
| KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ | |||
| KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||
| KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ | |||
| KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, _______, \ | |||
| KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(LAYER_1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT | |||
| ), | |||
| [LAYER_1] = KEYMAP( \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
| ), | |||
| }; | |||
| const uint16_t PROGMEM fn_actions[] = { | |||
| }; | |||
+ 25
- 0
keyboards/bananasplit/keymaps/hhkbanana/keymap.c
View File
| @ -0,0 +1,25 @@ | |||
| #include "bananasplit.h" | |||
| #define DEFAULT_LAYER 0 | |||
| #define LAYER_1 1 | |||
| const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
| [DEFAULT_LAYER] = KEYMAP_HHKBANANA( \ | |||
| KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ | |||
| KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ | |||
| KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PSCR, \ | |||
| KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ | |||
| KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(LAYER_1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT \ | |||
| ), | |||
| [LAYER_1] = KEYMAP_HHKBANANA( \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
| ), | |||
| }; | |||
| const uint16_t PROGMEM fn_actions[] = { | |||
| }; | |||
+ 45
- 0
keyboards/bananasplit/keymaps/nic/keymap.c
View File
| @ -0,0 +1,45 @@ | |||
| #include "bananasplit.h" | |||
| #define DEFAULT_LAYER 0 | |||
| #define THUMB_LAYER 1 | |||
| #define NORMAN_LAYER 2 | |||
| #define MOD_LAYER 3 | |||
| #define HYPER_TAB ALL_T(KC_TAB) | |||
| const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
| [DEFAULT_LAYER] = KEYMAP_HHKB_ARROW( \ | |||
| KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ | |||
| HYPER_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ | |||
| CTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, \ | |||
| KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, TG(NORMAN_LAYER), \ | |||
| KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, MO(THUMB_LAYER), KC_SPC, KC_LGUI, KC_LALT, KC_LEFT, KC_DOWN, KC_RIGHT \ | |||
| ), | |||
| [THUMB_LAYER] = KEYMAP_HHKB_ARROW( \ | |||
| MO(MOD_LAYER), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
| ), | |||
| [NORMAN_LAYER] = KEYMAP_HHKB_ARROW( \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, KC_D, KC_F, KC_K, KC_J, KC_U, KC_R, KC_L, KC_SCLN, _______, _______, _______, \ | |||
| _______, _______, _______, KC_E, KC_T, _______, KC_Y, KC_N, KC_I, KC_O, KC_H, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, KC_P, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
| ), | |||
| [MOD_LAYER] = KEYMAP_HHKB_ARROW( \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
| _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ | |||
| ), | |||
| }; | |||
| const uint16_t PROGMEM fn_actions[] = { | |||
| }; | |||
+ 65
- 0
keyboards/bananasplit/rules.mk
View File
| @ -0,0 +1,65 @@ | |||
| # MCU name | |||
| #MCU = at90usb1287 | |||
| MCU = atmega32u4 | |||
| # Processor frequency. | |||
| # This will define a symbol, F_CPU, in all source code files equal to the | |||
| # processor frequency in Hz. You can then use this symbol in your source code to | |||
| # calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
| # automatically to create a 32-bit value in your source code. | |||
| # | |||
| # This will be an integer division of F_USB below, as it is sourced by | |||
| # F_USB after it has run through any CPU prescalers. Note that this value | |||
| # does not *change* the processor frequency - it should merely be updated to | |||
| # reflect the processor speed set externally so that the code can use accurate | |||
| # software delays. | |||
| F_CPU = 16000000 | |||
| # | |||
| # LUFA specific | |||
| # | |||
| # Target architecture (see library "Board Types" documentation). | |||
| ARCH = AVR8 | |||
| # Input clock frequency. | |||
| # This will define a symbol, F_USB, in all source code files equal to the | |||
| # input clock frequency (before any prescaling is performed) in Hz. This value may | |||
| # differ from F_CPU if prescaling is used on the latter, and is required as the | |||
| # raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
| # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
| # at the end, this will be done automatically to create a 32-bit value in your | |||
| # source code. | |||
| # | |||
| # If no clock division is performed on the input clock inside the AVR (via the | |||
| # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
| F_USB = $(F_CPU) | |||
| # Interrupt driven control endpoint task(+60) | |||
| OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
| # Boot Section Size in *bytes* | |||
| # Teensy halfKay 512 | |||
| # Teensy++ halfKay 1024 | |||
| # Atmel DFU loader 4096 | |||
| # LUFA bootloader 4096 | |||
| # USBaspLoader 2048 | |||
| OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
| # Build Options | |||
| # comment out to disable the options. | |||
| # | |||
| BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
| MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
| EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
| CONSOLE_ENABLE = yes # Console for debug(+400) | |||
| COMMAND_ENABLE = yes # Commands for debug and configuration | |||
| #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
| NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
| BACKLIGHT_ENABLE = yes | |||
| # Optimize size but this may cause error "relocation truncated to fit" | |||
| #EXTRALDFLAGS = -Wl,--relax | |||
+ 2
- 0
keyboards/nyquist/eeprom-lefthand.eep
View File
| @ -0,0 +1,2 @@ | |||
| :0B0000000000000000000000000001F4 | |||
| :00000001FF | |||
+ 2
- 0
keyboards/nyquist/eeprom-righthand.eep
View File
| @ -0,0 +1,2 @@ | |||
| :0B0000000000000000000000000000F5 | |||
| :00000001FF | |||
+ 2
- 0
keyboards/nyquist/keymaps/default/Makefile
View File
| @ -1,3 +1,5 @@ | |||
| RGBLIGHT_ENABLE = yes | |||
| ifndef QUANTUM_DIR | |||
| include ../../../../Makefile | |||
| endif | |||
+ 7
- 0
keyboards/nyquist/keymaps/default/config.h
View File
+ 2
- 2
keyboards/nyquist/keymaps/default/keymap.c
View File
+ 195
- 47
keyboards/nyquist/matrix.c
View File
+ 2
- 0
keyboards/nyquist/split_util.c
View File
+ 3
- 3
keyboards/satan/keymaps/poker/keymap.c
View File
+ 3
- 0
keyboards/uk78/Makefile
View File
| @ -0,0 +1,3 @@ | |||
| ifndef MAKEFILE_INCLUDED | |||
| include ../../Makefile | |||
| endif | |||
+ 76
- 0
keyboards/uk78/config.h
View File
| @ -0,0 +1,76 @@ | |||
| /* | |||
| Copyright 2012 Jun Wako <ukkeyboards@gmail.com> | |||
| This program is free software: you can redistribute it and/or modify | |||
| it under the terms of the GNU General Public License as published by | |||
| the Free Software Foundation, either version 2 of the License, or | |||
| (at your option) any later version. | |||
| This program is distributed in the hope that it will be useful, | |||
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
| GNU General Public License for more details. | |||
| You should have received a copy of the GNU General Public License | |||
| along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
| */ | |||
| #ifndef CONFIG_H | |||
| #define CONFIG_H | |||
| #include "config_common.h" | |||
| /* USB Device descriptor parameter */ | |||
| #define VENDOR_ID 0x554B /* Ascii */ | |||
| #define PRODUCT_ID 0x004E | |||
| #define DEVICE_VER 0x0002 | |||
| #define MANUFACTURER UK Keyboards | |||
| #define PRODUCT UK78 | |||
| #define DESCRIPTION QMK keyboard firmware for UK78 | |||
| /* key matrix size */ | |||
| #define MATRIX_ROWS 5 | |||
| #define MATRIX_COLS 19 | |||
| /* key matrix pins */ | |||
| #define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 } | |||
| #define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 } | |||
| #define UNUSED_PINS | |||
| /* COL2ROW or ROW2COL */ | |||
| #define DIODE_DIRECTION COL2ROW | |||
| /* number of backlight levels */ | |||
| #define BACKLIGHT_PIN B6 | |||
| #ifdef BACKLIGHT_PIN | |||
| #define BACKLIGHT_LEVELS 3 | |||
| #endif | |||
| /* Set 0 if debouncing isn't needed */ | |||
| #define DEBOUNCING_DELAY 5 | |||
| /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
| #define LOCKING_SUPPORT_ENABLE | |||
| /* Locking resynchronize hack */ | |||
| #define LOCKING_RESYNC_ENABLE | |||
| /* key combination for command */ | |||
| #define IS_COMMAND() ( \ | |||
| keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
| ) | |||
| /* prevent stuck modifiers */ | |||
| #define PREVENT_STUCK_MODIFIERS | |||
| /* ws2812b options */ | |||
| #define RGB_DI_PIN F6 | |||
| #ifdef RGB_DI_PIN | |||
| #define RGBLIGHT_ANIMATIONS | |||
| #define RGBLED_NUM 20 | |||
| #define RGBLIGHT_HUE_STEP 8 | |||
| #define RGBLIGHT_SAT_STEP 8 | |||
| #define RGBLIGHT_VAL_STEP 8 | |||
| #endif | |||
| #endif | |||
+ 119
- 0
keyboards/uk78/keymaps/default/keymap.c
View File
| @ -0,0 +1,119 @@ | |||
| #include "uk78.h" | |||
| // Helpful defines | |||
| #define _______ KC_TRNS | |||
| // Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
| // The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
| // Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
| // entirely and just use numbers. | |||
| #define _BL 0 | |||
| #define _FL1 1 | |||
| #define _FL2 2 | |||
| const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
| /* _BL: Base Layer(Default) - For ISO enter use ANSI \ | |||
| * ,-------------------------------------------------------------------------------. | |||
| * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| /|BSpc| Del| P/| P*| P-| | |||
| * |-------------------------------------------------------------------------------| | |||
| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | P7| P8| P9| P=| | |||
| * |-------------------------------------------------------------------------------| | |||
| * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent| P4| P5| P6| P+| | |||
| * |-------------------------------------------------------------------------------| | |||
| * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up| P1| P2| P3|SLck| | |||
| * |-------------------------------------------------------------------------------| | |||
| * |Ctrl|Win |Alt | Space |Alt|Mo(1)|Ctrl|Lef|Dow| Rig| P0| P.|PEnt| | |||
| * `-------------------------------------------------------------------------------' | |||
| */ | |||
| [_BL] = KEYMAP( | |||
| KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_DEL, KC_PSLS, KC_PAST, KC_PMNS, | |||
| KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PEQL, | |||
| KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
| KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_SLCK, | |||
| KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), | |||
| /* _FL1: Function Layer 1 - For ISO enter use ANSI \ | |||
| * ,-------------------------------------------------------------------------------. | |||
| * | `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck| | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | |RST| | | | | | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | | |Hu+|Va+|Sa+| | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | |RGB|Hu-|Va-|Sa-|Bl-|Bl+| |Mute|Vol+| | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | BL_Toggle | | | | |Vol-| | | | | | |||
| * `-------------------------------------------------------------------------------' | |||
| */ | |||
| [_FL1] = KEYMAP( | |||
| KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC, BL_INC, KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
| /* _FL2: Function Layer 2 - For ISO enter use ANSI \ | |||
| * ,-------------------------------------------------------------------------------. | |||
| * | | | | | | | | | | | | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | | | | | | | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | | | | | | | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | | | | | | | | | | | | | | | | |||
| * |-------------------------------------------------------------------------------| | |||
| * | | | | | | | | | | | | | | | |||
| * `-------------------------------------------------------------------------------' | |||
| */ | |||
| [_FL2] = KEYMAP( | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
| KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
| }; | |||
| void matrix_init_user(void) { | |||
| } | |||
| void matrix_scan_user(void) { | |||
| } | |||
| bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
| return true; | |||
| } | |||
| void led_set_user(uint8_t usb_led) { | |||
| if (usb_led & (1 << USB_LED_NUM_LOCK)) { | |||
| } else { | |||
| } | |||
| if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||
| DDRA |= (1 << 3); PORTA |= (1 << 3); | |||
| } else { | |||
| DDRA &= ~(1 << 3); PORTA &= ~(1 << 3); | |||
| } | |||
| if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { | |||
| } else { | |||
| } | |||
| if (usb_led & (1 << USB_LED_COMPOSE)) { | |||
| } else { | |||
| } | |||
| if (usb_led & (1 << USB_LED_KANA)) { | |||
| } else { | |||
| } | |||
| } | |||
+ 16
- 0
keyboards/uk78/readme.md
View File
| @ -0,0 +1,16 @@ | |||
| # UK78 | |||
|  | |||
| A fully customizable 60%+numpad keyboard. | |||
| * Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin) | |||
| * Hardware Supported: UK78 PCB | |||
| * rev2 | |||
| * Hardware Availability: [ukkeyboards.](http://ukkeyboards.bigcartel.com/) | |||
| Make example for this keyboard (after setting up your build environment): | |||
| make uk78-default | |||
| See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||
+ 56
- 0
keyboards/uk78/rules.mk
View File
| @ -0,0 +1,56 @@ | |||
| # MCU name | |||
| MCU = at90usb1286 | |||
| # Processor frequency. | |||
| # This will define a symbol, F_CPU, in all source code files equal to the | |||
| # processor frequency in Hz. You can then use this symbol in your source code to | |||
| # calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
| # automatically to create a 32-bit value in your source code. | |||
| # | |||
| # This will be an integer division of F_USB below, as it is sourced by | |||
| # F_USB after it has run through any CPU prescalers. Note that this value | |||
| # does not *change* the processor frequency - it should merely be updated to | |||
| # reflect the processor speed set externally so that the code can use accurate | |||
| # software delays. | |||
| F_CPU = 16000000 | |||
| # | |||
| # LUFA specific | |||
| # | |||
| # Target architecture (see library "Board Types" documentation). | |||
| ARCH = AVR8 | |||
| # Input clock frequency. | |||
| # This will define a symbol, F_USB, in all source code files equal to the | |||
| # input clock frequency (before any prescaling is performed) in Hz. This value may | |||
| # differ from F_CPU if prescaling is used on the latter, and is required as the | |||
| # raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
| # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
| # at the end, this will be done automatically to create a 32-bit value in your | |||
| # source code. | |||
| # | |||
| # If no clock division is performed on the input clock inside the AVR (via the | |||
| # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
| F_USB = $(F_CPU) | |||
| # Interrupt driven control endpoint task(+60) | |||
| OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
| # Boot Section Size in *bytes* | |||
| OPT_DEFS += -DBOOTLOADER_SIZE=8192 | |||
| # Build Options | |||
| # comment out to disable the options. | |||
| # | |||
| BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) | |||
| MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||
| EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
| CONSOLE_ENABLE ?= no # Console for debug(+400) | |||
| COMMAND_ENABLE ?= no # Commands for debug and configuration | |||
| SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend | |||
| NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
| BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality | |||
| AUDIO_ENABLE ?= no | |||
| RGBLIGHT_ENABLE ?= yes | |||
+ 1
- 0
keyboards/uk78/uk78.c
View File
| @ -0,0 +1 @@ | |||
| #include "uk78.h" | |||
+ 20
- 0
keyboards/uk78/uk78.h
View File
| @ -0,0 +1,20 @@ | |||
| #ifndef UK78_H | |||
| #define UK78_H | |||
| #include "quantum.h" | |||
| #define KEYMAP( \ | |||
| K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \ | |||
| K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, K116, K117, K118, \ | |||
| K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, K217, K218, \ | |||
| K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \ | |||
| K400, K401, K402, K406, K410, K411, K412, K413, K414, K415, K416, K417, K418 \ | |||
| ) { \ | |||
| { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ | |||
| { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115, K116, K117, K118 }, \ | |||
| { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215, K216, K217, K218 }, \ | |||
| { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318 }, \ | |||
| { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414, K415, K416, K417, K418 } \ | |||
| } | |||
| #endif | |||