* adds support for GH60 Satan keyboard ANSI 125 layout, capslock and backlight implemented, support for WS2812LED strip included * added Phantom and GH60 Satan to travispull/408/head
@ -0,0 +1,115 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
SRC = led.c | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) | |||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) | |||
MIDI_ENABLE ?= no # MIDI controls | |||
AUDIO_ENABLE ?= no | |||
UNICODE_ENABLE ?= no # Unicode | |||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
#ifdef BACKLIGHT_ENABLE | |||
SRC := backlight.c $(SRC) | |||
#endif | |||
ifndef QUANTUM_DIR | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,24 @@ | |||
#include <avr/io.h> | |||
#include "backlight.h" | |||
#include "print.h" | |||
void init_backlight_pin(void) { | |||
print("init_backlight_pin()\n"); | |||
// Set our LED pins as output | |||
DDRB |= (1<<6); | |||
// Set our LED pins low | |||
PORTB &= ~(1<<6); | |||
} | |||
void backlight_set(uint8_t level) { | |||
if ( level == 0 ) { | |||
// Turn off light | |||
PORTB |= (1<<6); | |||
} else { | |||
// Turn on light | |||
PORTB &= ~(1<<6); | |||
} | |||
} | |||
@ -0,0 +1,92 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0003 | |||
#define MANUFACTURER SATAN | |||
#define PRODUCT GH60 | |||
#define DESCRIPTION QMK keyboard firmware for Satan GH60 with WS2812 support | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
// ROWS: Top to bottom, COLS: Left to right | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } | |||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* Backlight configuration | |||
*/ | |||
#define BACKLIGHT_LEVELS 1 | |||
/* Underlight configuration | |||
*/ | |||
#define ws2812_PORTREG PORTE | |||
#define ws2812_DDRREG DDRE | |||
#define ws2812_pin 2 | |||
#define RGBLED_NUM 8 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,162 @@ | |||
#include "satan.h" | |||
#ifdef RGBLIGHT_ENABLE | |||
#include "rgblight.h" | |||
#endif | |||
// Used for SHIFT_ESC | |||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BL 0 | |||
#define _FL 1 | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Keymap _BL: (Base Layer) Default Layer | |||
* ,-----------------------------------------------------------. | |||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | | |||
* |-----------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | | |||
* |-----------------------------------------------------------| | |||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | | |||
* |-----------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | |||
* |-----------------------------------------------------------| | |||
* |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_BL] = KEYMAP( | |||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ | |||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FL), KC_RCTL), | |||
/* Keymap _FL: Function Layer | |||
* ,-----------------------------------------------------------. | |||
* | | | | | | | | | | | | | | RESET| | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | |BL-|BL+|BL | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_FL] = KEYMAP( | |||
#ifdef RGBLIGHT_ENABLE | |||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
#else | |||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
#endif | |||
}; | |||
enum function_id { | |||
SHIFT_ESC, | |||
#ifdef RGBLIGHT_ENABLE | |||
RGBLED_TOGGLE, | |||
RGBLED_STEP_MODE, | |||
RGBLED_INCREASE_HUE, | |||
RGBLED_DECREASE_HUE, | |||
RGBLED_INCREASE_SAT, | |||
RGBLED_DECREASE_SAT, | |||
RGBLED_INCREASE_VAL, | |||
RGBLED_DECREASE_VAL | |||
#endif | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(SHIFT_ESC), | |||
#ifdef RGBLIGHT_ENABLE | |||
[1] = ACTION_FUNCTION(RGBLED_TOGGLE), | |||
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE), | |||
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), | |||
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), | |||
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), | |||
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), | |||
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), | |||
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), | |||
#endif | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
static uint8_t shift_esc_shift_mask; | |||
switch (id) { | |||
case SHIFT_ESC: | |||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; | |||
if (record->event.pressed) { | |||
if (shift_esc_shift_mask) { | |||
add_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
add_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
if (shift_esc_shift_mask) { | |||
del_key(KC_GRV); | |||
send_keyboard_report(); | |||
} else { | |||
del_key(KC_ESC); | |||
send_keyboard_report(); | |||
} | |||
} | |||
break; | |||
//led operations | |||
#ifdef RGBLIGHT_ENABLE | |||
case RGBLED_TOGGLE: | |||
if (record->event.pressed) { | |||
rgblight_toggle(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_increase_hue(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_HUE: | |||
if (record->event.pressed) { | |||
rgblight_decrease_hue(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_increase_sat(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_SAT: | |||
if (record->event.pressed) { | |||
rgblight_decrease_sat(); | |||
} | |||
break; | |||
case RGBLED_INCREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_increase_val(); | |||
} | |||
break; | |||
case RGBLED_DECREASE_VAL: | |||
if (record->event.pressed) { | |||
rgblight_decrease_val(); | |||
} | |||
break; | |||
case RGBLED_STEP_MODE: | |||
if (record->event.pressed) { | |||
rgblight_step(); | |||
} | |||
break; | |||
#endif | |||
} | |||
} |
@ -0,0 +1,36 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/io.h> | |||
#include "stdint.h" | |||
#include "led.h" | |||
void led_init_ports() { | |||
// * Set our LED pins as output | |||
DDRB |= (1<<2); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// Turn capslock on | |||
PORTB |= (1<<2); | |||
} else { | |||
// Turn capslock off | |||
PORTB &= ~(1<<2); | |||
} | |||
} |
@ -0,0 +1 @@ | |||
For WS2812B LED strip support, connect DIN from strip to PE2 on ATmega32u4 controller (see reference image controller.jpg) |
@ -0,0 +1,36 @@ | |||
#include "satan.h" | |||
#ifdef BACKLIGHT_ENABLE | |||
#include "backlight.h" | |||
#endif | |||
__attribute__ ((weak)) | |||
void matrix_init_user(void) { | |||
// leave these blank | |||
}; | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
// leave these blank | |||
}; | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
if (matrix_init_user) { | |||
(*matrix_init_user)(); | |||
} | |||
led_init_ports(); | |||
#ifdef BACKLIGHT_ENABLE | |||
init_backlight_pin(); | |||
#endif | |||
}; | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
if (matrix_scan_user) { | |||
(*matrix_scan_user)(); | |||
} | |||
}; |
@ -0,0 +1,42 @@ | |||
#ifndef SATAN_H | |||
#define SATAN_H | |||
#include "matrix.h" | |||
#include "keymap_common.h" | |||
#include <stddef.h> | |||
/* Clueboard matrix layout | |||
* ,-----------------------------------------------------------. | |||
* | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | | |||
* |-----------------------------------------------------------| | |||
* | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | | |||
* |-----------------------------------------------------------| | |||
* | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | | |||
* |-----------------------------------------------------------| | |||
* | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | | |||
* |-----------------------------------------------------------| | |||
* | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \ | |||
k40, k41, k42, k45, k4a, k4b, k4c, k4d \ | |||
) \ | |||
{ \ | |||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ | |||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ | |||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \ | |||
{k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \ | |||
{k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \ | |||
} | |||
void matrix_init_user(void); | |||
void matrix_scan_user(void); | |||
#endif |